03-28-2012, 11:15 AM | #1 |
Account Suspended
Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009
Location: nc
Posts: 1,835
|
All New 1000HP Level 4 Direct Bolt In Axles NOW AVAILABLE
All New Chevrolet Camaro 1000HP Level 4 Bolt In Axles!! No, your eyes are not deceiving you. The all new 1000 HP level 4 Bolt In Axles from the Driveshaft Shop are now available through Hendrix Engineering. Quick Feature Overview: - New Anti-Wheel hop design with re-engineered thick bar - 108mm CV's on both ends for longer life - 300M center bars (from material out of Sweden) - Rated at 1000hp - Special grease used in conjunction with harder internal designed especially for the Camaro's unique axle angle. - Coated housings and powder coated bars for superior corrosion protection - Great for daily driven and road coarse/circuit cars - 1 year warranty We all know the axles have taken a little while longer than expected, but the time for testing is over, and trust me when I say that these axles are well worth the wait. We wanted to make sure that everything was just right down to the very last detail before releasing them. Now that we have done so, The 1000 HP axles are officially up for grabs. After selling many of the 1400 HP Camaro axles, we realized that not everyone who was purchasing them really needed all that extra bulk. Don't get me wrong, the 1400 HP axles are a great set of axles and perfect for any serious racing enthusiast, but we wanted to craft something that could be directed towards all of our daily drivers out there that might not need extraordinary strength of the 1400HP axles, and that also might want to save a few bucks, while still being able to upgrade their drivetrain with a top of the line set of axles. This brand new set of axles is everything that a Camaro owner could possibly ask for when replacing their daily driver's stock axles. Although these axles use the smaller rolled 28 spline, which is in fact 35% stronger than traditional cut splines, they were still built with strength and durability in mind. They are crafted from nothing but the best 300 material straight from Sweden. This material has been proven time and time again to be by far the strongest material we have ever used to manufacture a set of axles. We wanted to bring an Anti Hop axle to the Camaro market that could still hold it's own and withstand a good beating. This presented a problem. We knew that the larger axle of the two would snap, no questions asked. We had to put our thinking caps on and figure out how to create an axle with far superior torsional resistance than a straight bar, without causing any harm. Needless to say, this new set of axles is a product of just that. After getting a few great minds together we came up with this new design. By machining the ends farther back, we have allowed the stress applied to the thicker bar to spread out and cover a larger area without breaking, even though it will not twist as much as a straight bar. So we now have the completed product with newly designed outer mounting Ends, which are E-coated. The CV not only has a stronger inner race, but also the Chromoly cage added strength to the system, making it capable of withstanding the workload placed upon it by the angle of the axle. All in all we have revamped the Anti-Wheel hop design enabling the axles to combat wheel hop and be torque friendly. If you would like to purchase the all new 1000 HP Level 4 Axles Bolt In Axles or would like additional information, feel free to visit our website by Clicking Here, giving us a call at (980) 521-0722, or sending us an E-Mail at dillonwilhelm@hendrix-engineering.com . Don't forget to mention this thread to get you special Camaro5 Forum pricing! . |
03-28-2012, 02:49 PM | #2 |
I'm nervous about the 1 year warranty, kinda makes it seem like your not 100% confident with the axles
|
|
03-28-2012, 05:53 PM | #3 |
|
dss makes these axles trust me they will out last your car!!! Also Thomas/ Hendrix
will take care of you! |
03-28-2012, 08:39 PM | #4 |
Account Suspended
Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009
Location: nc
Posts: 1,835
|
These axles have the same team behind them as every,I mean every record setting irs muscle car including marks 7 second passes. One year is the industry standard for a high performance cb axle from a reputable company even tho we have guys that have been running our axles for years .you canot buy a better axle,and I'm 100% confident of that.
|
03-28-2012, 10:14 PM | #5 |
I like hearing that confidence. I don't doubt the workmanship in the products, I'm glad the companies and clients really stand behind them
|
|
03-28-2012, 11:31 PM | #6 |
Drives: SIM 2010 2SS/RS LS3 LPE750 Join Date: Feb 2012
Location: Mckinney, Texas
Posts: 764
|
And the million dollar question is,,,,,how much? And confirming that these axles will handle the power of lowered cars?
|
03-29-2012, 08:16 AM | #7 |
Account Suspended
Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009
Location: nc
Posts: 1,835
|
|
03-29-2012, 08:17 AM | #8 |
Account Suspended
Drives: First 9 inch-12 bolt IRS Camaro Join Date: Jun 2009
Location: nc
Posts: 1,835
|
|
03-29-2012, 10:00 AM | #9 |
Account Suspended
Drives: 2010 IBM Camaro 2008 Corvette Join Date: Aug 2008
Location: Tiffin,Iowa
Posts: 560
|
Cant wait to get mine and my drive shaft!!!
|
03-29-2012, 01:13 PM | #10 |
Account Suspended
Drives: 2011 SS/RS Join Date: May 2011
Location: North Carolina
Posts: 15,241
|
|
03-29-2012, 01:18 PM | #11 |
ou mai gad
Drives: SW 2SS x2 Join Date: Feb 2010
Location: MX
Posts: 643
|
- Great for daily driven and road coarse/circuit cars
Drag cars should still use the 1400 ones? even if lowered?
__________________
|
03-29-2012, 02:23 PM | #12 | |
Account Suspended
Drives: 2011 SS/RS Join Date: May 2011
Location: North Carolina
Posts: 15,241
|
Quote:
Great for all 3. Yes they were designed for the lowered cars and will hold up even while dragging with your hp ratings and best of all a fraction of the price |
|
03-30-2012, 05:54 PM | #13 |
Drives: 2010 ss(scott) 2011 rs(keyla) Join Date: Dec 2010
Location: Hope Mills, North Cack
Posts: 73
|
Got mine and they are great!!!!!!
__________________
Don't be scerd!! Run it!!
|
03-30-2012, 09:26 PM | #14 |
NJ/SoCal HT5 COTW 3/25/12
Drives: 2015 Z06/14 C7/08 Z06/07 Tahoe Z71 Join Date: Nov 2011
Location: South Jersey & SoCal
Posts: 1,961
|
Can you PM me a price on these & the 1400 axles, shipped to a shop at 93407...Any kind of B2B discount?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best Deal on DSS Camaro 2010 - 2011 Axles | Paschal Performance | Transmission / Driveline | 8 | 09-18-2010 11:23 PM |
Hot Deal For DSS 2010 Camaro Axles | Paschal Performance | Transmission / Driveline | 3 | 03-04-2010 08:36 PM |
The Camaro center section is a direct bolt in for the G8 | GFORCE1320 | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 0 | 02-28-2010 06:35 PM |
1,000 HP Extreme Duty Rear Axles and CV Joints Package | SpohnPerformance | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 31 | 02-24-2010 10:50 PM |
NEW Driveshaft shop High output axles! | IPS Brandon | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 18 | 09-19-2009 02:38 PM |