x pipe .؟ - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MrWray · 04-19-2014, 07:00 PM

Quote:

Originally Posted by Baer383

Come take a ride in mine.

My neighbors sh!t their pants every time I start it.

mine is plenty loud, it rattles the windows when its running

ninsecgt · 04-20-2014, 04:11 PM

Quote:

Originally Posted by DrkPhx

For you guys complaining about the exhaust loudness; I would definitely recommend the ADM exhaust controller. It has two settings, factory and closed at all times (including WOT). It really quiets down the sound more than anything. I just installed a cam and crank pulley and it's still quiet at idle. At WOT it quiets the exhaust so much all your hear is the supercharger whine.

Are you serious about the adm controller? IF you are then I'll buy one for sure. Thanks

Baer383 · 04-20-2014, 04:11 PM

Quote:

Originally Posted by ninsecgt

Are you serious about the amd controller? IF you are then I'll buy one for sure. Thanks

Just so you know they are $250 bucks.

ninsecgt · 04-20-2014, 05:57 PM

Quote:

Originally Posted by Baer383

Just so you know they are $250 bucks.

Is it a plug and play design? is it easy to install? Thanks for the heads up reference cost but I'll stomach it for quietness. I guess all the noise from police sirens have took its toll on me for the last 21 yrs. Lol

Baer383 · 04-20-2014, 06:00 PM

Quote:

Originally Posted by ninsecgt

Is it a plug and play design? is it easy to install? Thanks for the heads up reference cost but I'll stomach it for quietness. I guess all the noise from police sirens have played a toll on me for the last 21 yrs. Lol

It is as close to plug and play as you can get, they are very easy to install,
I too have to buy one as the X pipe I installed cut the volume down some but not at idle this controller will.

white1LE · 04-20-2014, 07:36 PM

Anyone have the part number for the X-pipe being used? Just want to make sure I get the same one you guys are talking about. Exactly what I'm looking for. Thanks

DrkPhx · 04-20-2014, 07:37 PM

Definitely plug n play. I will post an open close video. I didn't pay that much for mine.

Baer383 · 04-20-2014, 07:38 PM

Quote:

Originally Posted by white1LE

Anyone have the part number for the X-pipe being used? Just want to make sure I get the same one you guys are talking about. Exactly what I'm looking for. Thanks

This is the one I put in and you want,

http://www.summitracing.com/ga/parts...0791/overview/

http://www.summitracing.com/ga/parts...3226/overview/

MrWray · 04-20-2014, 07:42 PM

Quote:

Originally Posted by white1LE

Anyone have the part number for the X-pipe being used? Just want to make sure I get the same one you guys are talking about. Exactly what I'm looking for. Thanks

The magnaflow Tru X part # is 10791

ninsecgt · 04-21-2014, 10:53 PM

Quote:

Originally Posted by MrWray

The magnaflow Tru X part # is 10791

That's the one.

ninsecgt · 04-21-2014, 10:56 PM

Quote:

Originally Posted by Baer383

It is as close to plug and play as you can get, they are very easy to install,
I too have to buy one as the X pipe I installed cut the volume down some but not at idle this controller will.

I'm calling amd Tuesday to order a controller.

white1LE · 05-31-2014, 08:54 PM

Just installed the Magnaflow X-pipe today and it is exactly what I was looking for. Fit perfect. If anyone else plans to do this, get a chain style pipe cutter as mentioned above. Makes this a 45 minute job, if you have access to a hoist that is. Lol. A must have for ALL 5th gens if you ask me.

Drew P · 06-04-2014, 08:32 AM

Magnaflow makes a two in/out internal x-pipe muffler that fits in the stock h-pipe location. I have it on my car. Massive difference in noise.

ashengreyZL1 · 06-26-2014, 02:01 AM

Does anyone know how to get rid of the POP at deceleration ?

04-20-2014, 07:36 PM	#20
white1LE Drives: 2013 Camaro ZL1 Join Date: Nov 2012 Location: Dubuque, IA Posts: 880	Anyone have the part number for the X-pipe being used? Just want to make sure I get the same one you guys are talking about. Exactly what I'm looking for. Thanks __________________ 13 ZL1 A6 LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp

05-31-2014, 08:54 PM	#26
white1LE Drives: 2013 Camaro ZL1 Join Date: Nov 2012 Location: Dubuque, IA Posts: 880	Just installed the Magnaflow X-pipe today and it is exactly what I was looking for. Fit perfect. If anyone else plans to do this, get a chain style pipe cutter as mentioned above. Makes this a 45 minute job, if you have access to a hoist that is. Lol. A must have for ALL 5th gens if you ask me. __________________ 13 ZL1 A6 LSX 427 with AGP Twin Turbos, E85 and Flex Fuel. Built and tuned by ADM Performance 1000rwhp

06-04-2014, 08:32 AM	#27
Drew P Drives: Camaro ZL1 Join Date: May 2012 Location: Houston Posts: 233	Magnaflow makes a two in/out internal x-pipe muffler that fits in the stock h-pipe location. I have it on my car. Massive difference in noise. __________________ 2012 A6 Coupe 630RWHP 10.93@125 Mods: ID850 Injectors; D3PE HX, Reservoir & Atmospheric Catch-Can; LPE 2.55 Upper & 9.1 Lower Pulleys w/ ATI Damper; LPE Idler Pulley Relocation Bracket; "Green" Serp. Belt; Cat delete;ADM Exhaust Override; Magnaflow X-Pipe Muffler (in addition to stock mufflers); Cold Air Inductions CAI; 160 thermostat; LS9 Isolator; Port/polish snout and intake runners; LPE GT9 camshaft with dual springs and titanium retainers; Kenne Bell BAP, Install and Engine Tune by Serious Hp; Fab work by D3 Performance Engineering; Trans Tune by Keith; Coming Soon: Flex Fuel Conversion.

04-20-2014, 07:37 PM	#21
DrkPhx Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011 Location: MN Posts: 2,250	Definitely plug n play. I will post an open close video. I didn't pay that much for mine.

06-26-2014, 02:01 AM	#28
ashengreyZL1 Davenport Stage 6 Drives: 2013 ashen grey ZL1 M6 Join Date: Mar 2013 Location: Alberta, Great White North Posts: 67	Does anyone know how to get rid of the POP at deceleration ?