ARK DT-S cat-back exhaust (install & review) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JantzenOKC · 03-31-2016, 04:08 PM

I worked out a sponsorship deal with ARK Performance to try out their DT-S catback exhaust system. It has 2.5" piping and runs two resonators into an X-pipe. I think it will sound pretty good on my car being twin turbo and catless. I really wanted to with the NT-2 since it had 2.75" piping but was afraid of the drone it might have.

One thing about this exhaust that is really cool is that the whole thing is fully polished stainless steel. Since I polished my new downpipes my exhaust will now be polished from turbo to tip! Oh and the burnt tips are pretty cool too.

It will be a couple to few weeks before I get my car put back together, then I will be able to do the install and review it and make some sound clips.

The exhaust got here yesterday and it was packed very well! Not a scratch on any of it.

JantzenOKC · 03-31-2016, 04:41 PM

.

dmginc · 03-31-2016, 04:42 PM

JantzenOKC · 03-31-2016, 08:33 PM

.

Shawno72 · 03-31-2016, 11:05 PM

Ark is def high quality

chasmanian · 04-01-2016, 04:26 AM

Very nice. I like those tips too.

1Coopgt · 04-02-2016, 09:43 PM

Where's the pics and vid of the install come on enough teasing . Looks nice .

JantzenOKC · 05-05-2016, 06:25 AM

Finally got the exhaust all bolted up and aligned. It all fit pretty good and was easy to install. These pics aren't the best but once I get the car up and running again I'll clean everything up and take some better pics.

JantzenOKC · 05-05-2016, 06:27 AM

.

dmginc · 05-05-2016, 10:23 AM

nice...now make a video

Flotek · 05-05-2016, 08:47 PM

I'm not too fond of the fake burnt ricer tips

03-31-2016, 04:08 PM	#1
JantzenOKC Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012 Location: Edmond, Oklahoma Posts: 3,073	ARK DT-S cat-back exhaust (install & review) I worked out a sponsorship deal with ARK Performance to try out their DT-S catback exhaust system. It has 2.5" piping and runs two resonators into an X-pipe. I think it will sound pretty good on my car being twin turbo and catless. I really wanted to with the NT-2 since it had 2.75" piping but was afraid of the drone it might have. One thing about this exhaust that is really cool is that the whole thing is fully polished stainless steel. Since I polished my new downpipes my exhaust will now be polished from turbo to tip! Oh and the burnt tips are pretty cool too. It will be a couple to few weeks before I get my car put back together, then I will be able to do the install and review it and make some sound clips. The exhaust got here yesterday and it was packed very well! Not a scratch on any of it. __________________ 3.6L Twin Turbo V6 Garrett GT28 turbos -- Jacfab forged connecting rods -- Diamond forged pistons(10.5:1) -- Alky Control Methonal Injection -- CircleD 2E triple disc torque converter -- BMR suspension 10.75 @ 131mph Last edited by JantzenOKC; 03-31-2016 at 04:44 PM.

03-31-2016, 04:41 PM	#2
JantzenOKC Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012 Location: Edmond, Oklahoma Posts: 3,073	. Attached Images __________________ 3.6L Twin Turbo V6 Garrett GT28 turbos -- Jacfab forged connecting rods -- Diamond forged pistons(10.5:1) -- Alky Control Methonal Injection -- CircleD 2E triple disc torque converter -- BMR suspension 10.75 @ 131mph

03-31-2016, 04:42 PM	#3
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	__________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

03-31-2016, 08:33 PM	#4
JantzenOKC Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012 Location: Edmond, Oklahoma Posts: 3,073	. Attached Images __________________ 3.6L Twin Turbo V6 Garrett GT28 turbos -- Jacfab forged connecting rods -- Diamond forged pistons(10.5:1) -- Alky Control Methonal Injection -- CircleD 2E triple disc torque converter -- BMR suspension 10.75 @ 131mph

03-31-2016, 11:05 PM	#5
Shawno72 Drives: 2015 Black 2LT RS M6 Join Date: Aug 2015 Location: Cali Posts: 2,033	Ark is def high quality __________________ Overkill tune/E85/80mm•CAI cold air intake w/my custom maf tube•Apex air scoop•JacFab ported intake/Extendolater•Vitesse•EE EX2 catch can•Innovate wideband•ARH HFC's•NPP exhaust•11386 xpipe•Brembos/cross drilled/slotted rotors•SS M/C•Pfadt 1.25 springs•1LE struts/sways/strut tower brace•BMR diff bush, trail arms/bush, adj toe links•My custom Tunnel brace•Hurst short throw shifter•JDP stage 1 clutch res•1LE steering wheel, shift boot•ZL1 rear diffuser/splash guards•GM splitter•Z/28 grille/flowtie/spoiler/wheels•GM performance pedals•"Chevrolet" door sills•10" Kicker sub•BigWorm overlays

04-01-2016, 04:26 AM	#6
chasmanian Drives: 2015 Camaro SS Join Date: Dec 2013 Location: Easton, PA Posts: 291 View My Garage	Very nice. I like those tips too.

04-02-2016, 09:43 PM	#7
1Coopgt Drives: All Black 2012 1LS Join Date: Feb 2015 Location: Rochester,NY Posts: 2,042 View My Garage	Where's the pics and vid of the install come on enough teasing . Looks nice . __________________ Mods, K&N CAI ,VTC , GM Perf Axleback Exhaust, Elite Eng CC and CSS, GM Strut Tower Brace,Carbon Fiber Anvil Spoiler,ASC T5 Splitter,Gen5diy Foglight kit.

05-05-2016, 06:25 AM	#8
JantzenOKC Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012 Location: Edmond, Oklahoma Posts: 3,073	Finally got the exhaust all bolted up and aligned. It all fit pretty good and was easy to install. These pics aren't the best but once I get the car up and running again I'll clean everything up and take some better pics. Attached Images __________________ 3.6L Twin Turbo V6 Garrett GT28 turbos -- Jacfab forged connecting rods -- Diamond forged pistons(10.5:1) -- Alky Control Methonal Injection -- CircleD 2E triple disc torque converter -- BMR suspension 10.75 @ 131mph

05-05-2016, 06:27 AM	#9
JantzenOKC Drives: '13 2LT/RS Twin Turbo Join Date: Aug 2012 Location: Edmond, Oklahoma Posts: 3,073	. Attached Images __________________ 3.6L Twin Turbo V6 Garrett GT28 turbos -- Jacfab forged connecting rods -- Diamond forged pistons(10.5:1) -- Alky Control Methonal Injection -- CircleD 2E triple disc torque converter -- BMR suspension 10.75 @ 131mph

05-05-2016, 10:23 AM	#10
dmginc Drives: In Circles Join Date: Mar 2011 Location: South Carolina Posts: 3,433 View My Garage	nice...now make a video __________________ CAI Cold Air Intake, BMR Strut Tower Brace, BMR 1.2" Lowering Springs Gen5DIY Fog Lights, Big Worm Third Brake Light/Side Marker Tint (Charcoal) GTS Tail Light Covers, Purple Under Hood Lighting Magnaflow Resonated X-Pipe w/ Muffler Delete Black Plasti Dipped Wheels, Z/28 Spoiler

05-05-2016, 08:47 PM	#11
Flotek Drives: 2015 RS camaro Join Date: May 2016 Location: Pa Posts: 187	I'm not too fond of the fake burnt ricer tips