01-02-2011, 05:56 PM | #1 |
Break Necks, Cash Checks
Drives: 2010 black Camaro 2SS/RS Join Date: Apr 2010
Location: Little Rock, AR
Posts: 701
|
How to wire grille lighting?
Hey guys, I'm thinking about putting some LED lighting behind my grille, what would you tap into for the power/ground? Could you tap into the fog lights or the side markers?
Has anyone done the grille lighting? Thanks!
__________________
2009 CTS-V - White Diamond - intake, exhaust, wheels, visual mods
|
01-02-2011, 07:13 PM | #2 |
Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009
Location: Palmyra, PA
Posts: 5,675
|
i trided and failed the fan is right their where the grill is
__________________
Email: rdurso1@yahoo.com |
01-02-2011, 07:24 PM | #3 |
Break Necks, Cash Checks
Drives: 2010 black Camaro 2SS/RS Join Date: Apr 2010
Location: Little Rock, AR
Posts: 701
|
uhh....what? I don't even understand that post...
__________________
2009 CTS-V - White Diamond - intake, exhaust, wheels, visual mods
|
01-02-2011, 08:38 PM | #4 |
Drives: Red 2SS/RS M6 Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 6,219
|
If your getting a light from AAC, it will come with a remote. Run the power wire to the fuse box post, fuse it, ground really to any screw going into the frame or tap into any ground wire, ie, side marker etc.
Lupe |
01-02-2011, 09:29 PM | #5 |
Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009
Location: Palmyra, PA
Posts: 5,675
|
soory i was saying where the grill area is is two fans that cool the engine and if any of the lights get loose they can be sucked in by the fans
__________________
Email: rdurso1@yahoo.com |
01-03-2011, 09:34 AM | #6 |
Doc
|
Depends on how / when you want the lights to be lit? If for show use, you can grab power off the fuse box and mount a switch in the engine bay and ground it to your CAI box. This way you don't have to run wires into the car.
__________________
1100-7/20/2009 * 6000-2/4/10 Proud Owner of Autographed Litho # 1282010 Camaro 2 SS/RS - BLACKOUT & 2017 Camaro 2 SS - 50th Anniversary #894 WWW. NY5THGEN.COM
|
01-03-2011, 10:13 AM | #7 |
Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008
Location: NJ
Posts: 1,090
|
what kind of grille lighting are you talking about.. i did grill lighting on my camaro (see Sig)
if you need help shoot me a PM
__________________
2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar | ERL 427ci | Squash Fuel System | Stainless Works Chambered 3" | Mcleod RXT | Factory Hurst Short Throw | Black Forgestar F14s | CTS V 6 Piston Brembo | VIS AMS Carbon Fiber Hood | Anvil Carbon Fiber Spoiler |
01-03-2011, 11:31 AM | #8 |
Break Necks, Cash Checks
Drives: 2010 black Camaro 2SS/RS Join Date: Apr 2010
Location: Little Rock, AR
Posts: 701
|
That's what im talking about right there, how'd you do it?
__________________
2009 CTS-V - White Diamond - intake, exhaust, wheels, visual mods
|
01-03-2011, 11:37 AM | #9 |
Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008
Location: NJ
Posts: 1,090
|
I bought a 12" blue led strip and i ran a wire from the power terminal under the hood (Under a red plastic cover) through a hole in the firewall located on the drivers side right behind the wheel well (you can find it if you feel around there, theres a rubber grommet in the hole) to a switch under the steering wheel. then from the switch i ran a wire back through that hole to the front. i attached the led strip with some wire to hold it up against the hood latch plate. i connected the wire coming from the switch to the positive on the led strip. then ran a wire from the negative on the led strip back through that same hole and grounded it in the drivers side fuse box on a bolt you will find in there... and thats all you have to do it was my first time wiring anything and it took less than an hour mainly because i had to reach up underneath dash to pull the wires through that hole. good luck! let me know if you have more questions.
__________________
2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar | ERL 427ci | Squash Fuel System | Stainless Works Chambered 3" | Mcleod RXT | Factory Hurst Short Throw | Black Forgestar F14s | CTS V 6 Piston Brembo | VIS AMS Carbon Fiber Hood | Anvil Carbon Fiber Spoiler |
01-03-2011, 01:00 PM | #10 | |
dirtbag
Drives: 2010 camaro LS Join Date: Mar 2010
Location: Addison TX
Posts: 1,037
|
did you have to take the front bumper off? i was looking at doing the same thing but it looks like you have to take the bumper off
Quote:
__________________
|
|
01-03-2011, 01:52 PM | #11 |
Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008
Location: NJ
Posts: 1,090
|
nope i didnt take off my bumper .. as long as you can fit your hand through the grill your fine
__________________
2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar | ERL 427ci | Squash Fuel System | Stainless Works Chambered 3" | Mcleod RXT | Factory Hurst Short Throw | Black Forgestar F14s | CTS V 6 Piston Brembo | VIS AMS Carbon Fiber Hood | Anvil Carbon Fiber Spoiler |
01-03-2011, 02:02 PM | #12 |
dirtbag
Drives: 2010 camaro LS Join Date: Mar 2010
Location: Addison TX
Posts: 1,037
|
well that sucks kuz i dont have a stock grill
__________________
|
01-03-2011, 02:16 PM | #13 |
NEcamaro5
|
If you don't want to use a ton of wire power the light under the hood with a fuse. Then run just one black wire inside that you can put to your switch and from switch to ground. I just don't like running hot wires through the firewall. There's many ways to do this. Use good conectors and shrink tubing can help. Double check every thing before adding power.
|
01-03-2011, 02:18 PM | #14 |
NEcamaro5
|
You can take the cover off that the hood latch is bolted to. Only a few screws and some push pins.
|
|
|
Tags |
grille, install, led, lighting |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where to wire in ambient footwell lighting? | cybercoaster | Cosmetics and Lighting Modification Discussions | 32 | 01-11-2016 11:08 AM |
Question about Street Scene Lower Grille Ducts | CamaroSkooter | Cosmetics and Lighting Modification Discussions | 24 | 12-01-2010 04:38 PM |
footwell neon lighting. How to wire to have it come on the other ambient lighting? | Jakefeb3 | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 6 | 11-22-2009 09:32 PM |
Some Texas Lighting Laws | Mecha | USA - Texas | 5 | 10-20-2009 01:49 PM |
Lower Grille on Concept Vs. Lower Grille on Pre-Pro's | Sharpe | 5th Gen Camaro SS LS LT General Discussions | 17 | 11-18-2008 05:06 PM |