Vengeance Racing Install Pfadt Coilovers/Swaybars/Trailing arms on 2010 Camaro... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ron@Vengeance · 09-10-2010, 02:42 PM

Had a customer bring in his 2010 Camaro SS that we recently completed a cam installation on. With the newly added power it was now time for better handling platform for mostly street driving.

Vengeance Racing pieced together a kit that includes Pfadt trailing arms, Pfadt Sport Springs, Pfadt Sway Bars/endlinks & Bushings.

Factory Trailing Arm compared to Pfadt Trailing Arm.

Factory Spring compared to Pfadt Sport Spring

Factory Sway Bar compared to Pfadt Sway Bar

Ride Height post-install.

Apex Motorsports · 09-10-2010, 04:30 PM

Like a whole different car....

PfadtRacing · 09-14-2010, 12:23 AM

Ron, thanks for posting this up. That car looks fantastic! What else does your customer have planned for the car? Engine mods or anything? Are they going to be tracking it at all?

Ron@Vengeance · 09-14-2010, 07:06 AM

We have already installed camshaft/cold air/longtubes/thermostat/pulley/shifter/catback.... Next up is a Magnuson TVS 2300...

Dr Jkel · 09-14-2010, 08:08 AM

My car does really look good with it's new stance and rides like it is on rails. I can tell a dfference in the way it handles but I can honestly say that I didn't give up any ride quality.

I had about a 3 hour ride home after the install and could not tell any difference in ride quality.

The MGW that Ron suggested is totally awesome. I like the positive shifts and simply the way it feels.

With the cam and other things I am pushing about 445 or so to the wheels and she runs great, I have had ZERO problems with any of the work Vengenace has done to my car. I make great power with a smaller cam, have not lost any drivability or dependabilty.

I did have a check engine light, but that was because the gas cap wasn't tight, duh.

I do not plan on doing any track racing, but I may do a lap or 2 at the track fest coming up just to see the difference, but since the course is a motorcycle course it really eats up the tires, so not much of that.

Ron is talking me into a TVS2300 and I will probably make around 600 rwhp, but need to save a few more pennies for that one.

I would like to thank Ron from Vengeance for the hospitality he showed me during this install, great bunch of guys who do awesome work, and to Aaron and Blair from Pfadt for answering many many many questions I had. Sometimes on these forums you get vendors who just want your money and they are gone, but these two Vengeance and Pfadt are really great and continue to answer any question I may have.

Their products are well designed and work as advertised. They just don't " Sell You Parts for the sake of selling you something" which in today's society is refreshing.

John

GEEo · 09-14-2010, 08:12 AM

Looke nice!

orange10s.c. · 09-14-2010, 08:27 AM

get them to Road Atl. in dec. 4th and 5th weekend and really see what she's got. !!!! looking good though.

bi11ymc · 09-14-2010, 08:30 AM

Dr. Jkel,
I am happy for you and your Vengeance build. I am having the parts in my signature installed by them on the week of Sept. 27. I am excited about the Pfadt suspension pieces, cam and super charger. I will let you know after it is all done and have driven it a while as to how much you really need to save up for the super charger

Dr Jkel · 09-14-2010, 08:40 AM

Quote:

Originally Posted by bi11ymc

Dr. Jkel,
I am happy for you and your Vengeance build. I am having the parts in my signature installed by them on the week of Sept. 27. I am excited about the Pfadt suspension pieces, cam and super charger. I will let you know after it is all done and have driven it a while as to how much you really need to save up for the super charger

I really appreciate it alot, I think you will be totally satisfied with your build from Vengenace. Maybe they will have the twin turbo car close to completion when you are there. I don't know if you have been to their shop but they really take care of your baby, place is always clean and everyone is so nice.

You know the funny thing was when I was at Venegance I met a guy who was having his car worked on, I then realized that he was from Pennsylvaina. Now you know a shop is good when someone comes 10 hours to get work done.

bi11ymc · 09-14-2010, 08:42 AM

Quote:

Originally Posted by Dr Jkel

I really appreciate it alot, I think you will be totally satisfied with your build from Vengenace. Maybe they will have the twin turbo car close to completion when you are there. I don't know if you have been to their shop but they really take care of your baby, place is always clean and everyone is so nice.

You know the funny thing was when I was at Venegance I met a guy who was having his car worked on, I then realized that he was from Pennsylvaina. Now you know a shop is good when someone comes 10 hours to get work done.

Oh, I forgot to add:

Roll Tide Roll

fastfaster · 09-14-2010, 08:45 AM

Quote:

Originally Posted by Ron@Vengeance

We have already installed camshaft/cold air/longtubes/thermostat/pulley/shifter/catback.... Next up is a Magnuson TVS 2300...

how much did the front springs lower the front?

Dr Jkel · 09-14-2010, 08:49 AM

Quote:

Originally Posted by fastfaster

how much did the front springs lower the front?

I think it lowered the front 1" and the rear 1.25" It just gives it a little better stance. The pictures don't do it justice and it actually settled just a little bit after the ride home.

Quote:

Originally Posted by bi11ymc

Oh, I forgot to add:

Roll Tide Roll

OH yeah ROLL TIDE ROLL.

09-10-2010, 02:42 PM	#1
Ron@Vengeance Drives: 2013 Artic White GrandSport Join Date: Jun 2009 Location: In the shop Posts: 339	Vengeance Racing Install Pfadt Coilovers/Swaybars/Trailing arms on 2010 Camaro... Had a customer bring in his 2010 Camaro SS that we recently completed a cam installation on. With the newly added power it was now time for better handling platform for mostly street driving. Vengeance Racing pieced together a kit that includes Pfadt trailing arms, Pfadt Sport Springs, Pfadt Sway Bars/endlinks & Bushings. Factory Trailing Arm compared to Pfadt Trailing Arm. Factory Spring compared to Pfadt Sport Spring Factory Sway Bar compared to Pfadt Sway Bar Ride Height post-install.

09-14-2010, 08:08 AM	#5
Dr Jkel and MR. HYDE Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Oxford, Alabama Posts: 4,375	My car does really look good with it's new stance and rides like it is on rails. I can tell a dfference in the way it handles but I can honestly say that I didn't give up any ride quality. I had about a 3 hour ride home after the install and could not tell any difference in ride quality. The MGW that Ron suggested is totally awesome. I like the positive shifts and simply the way it feels. With the cam and other things I am pushing about 445 or so to the wheels and she runs great, I have had ZERO problems with any of the work Vengenace has done to my car. I make great power with a smaller cam, have not lost any drivability or dependabilty. I did have a check engine light, but that was because the gas cap wasn't tight, duh. I do not plan on doing any track racing, but I may do a lap or 2 at the track fest coming up just to see the difference, but since the course is a motorcycle course it really eats up the tires, so not much of that. Ron is talking me into a TVS2300 and I will probably make around 600 rwhp, but need to save a few more pennies for that one. I would like to thank Ron from Vengeance for the hospitality he showed me during this install, great bunch of guys who do awesome work, and to Aaron and Blair from Pfadt for answering many many many questions I had. Sometimes on these forums you get vendors who just want your money and they are gone, but these two Vengeance and Pfadt are really great and continue to answer any question I may have. Their products are well designed and work as advertised. They just don't " Sell You Parts for the sake of selling you something" which in today's society is refreshing. John Last edited by Dr Jkel; 09-14-2010 at 08:36 AM.

09-14-2010, 08:30 AM	#8
bi11ymc "Silver Street" Drives: 2010 2SS/RS L99 Join Date: Oct 2009 Location: Franklin, TN Posts: 707	Dr. Jkel, I am happy for you and your Vengeance build. I am having the parts in my signature installed by them on the week of Sept. 27. I am excited about the Pfadt suspension pieces, cam and super charger. I will let you know after it is all done and have driven it a while as to how much you really need to save up for the super charger __________________ Silver Street - 2010 Camaro 2SS/RS, SIM, Gray, Cyber Gray Rally Stripes, Polished Wheels, Automatic (L99) - 553 RWHP/510 RWTQ CAI Inc., ARH LT Headers with Cats, Borla Touring Cat-Back; Pfadt Coil Overs, Sway Bars, End Links, and Trailing Arms; Comp Cams Blower Cam, Dual Springs, Push-Rods, and Lifters; GM LS2 Lifter Trays, 6.2 MLS Head Gaskets, Crank Bolt, and LS2 Front Cover; 3-Bolt Conversion Timing Gear, Katech C5R Timing Chain, ARP LS2/LS3 Head Bolt Kit, Melling Hi Volume Oil Pump, TVS 2300 Supercharger (Black); Build by Vengeance Racing; Custom Tune by Vengeance Racing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 09:27 PM
Drag Racing Suspension Kits	Info@PeddersUSA.com	Suspension / Chassis / Brakes	25	02-21-2010 08:48 PM
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES	Info@PeddersUSA.com	Suspension / Brakes / Chassis	106	10-19-2009 06:08 PM
Tom Henry Racing Announces a Special Edition 2010 Camaro!	TAG UR IT	5th Gen Camaro SS LS LT General Discussions	72	04-30-2009 12:57 PM

09-10-2010, 04:30 PM	#2
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,179	Like a whole different car....

09-14-2010, 12:23 AM	#3
PfadtRacing Drives: 2010 Camaro, 2006 Z06 Join Date: Feb 2009 Location: SLC, UT Posts: 3,370	Ron, thanks for posting this up. That car looks fantastic! What else does your customer have planned for the car? Engine mods or anything? Are they going to be tracking it at all?

09-14-2010, 07:06 AM	#4
Ron@Vengeance Drives: 2013 Artic White GrandSport Join Date: Jun 2009 Location: In the shop Posts: 339	We have already installed camshaft/cold air/longtubes/thermostat/pulley/shifter/catback.... Next up is a Magnuson TVS 2300...

09-14-2010, 08:12 AM	#6
GEEo OKCamaros Drives: 4 banger Diesel Join Date: Mar 2010 Location: Philippines Posts: 4,572	Looke nice!

09-14-2010, 08:27 AM	#7
orange10s.c. Drives: IOM 2SS RS M6 sunroof Join Date: Jul 2009 Location: panama city fl Posts: 5,117 View My Garage	get them to Road Atl. in dec. 4th and 5th weekend and really see what she's got. !!!! looking good though.