01-17-2017, 08:50 AM | #1 |
Drives: 2014blackss Join Date: Oct 2016
Location: high point, NC
Posts: 7
|
Newbie-Dyno Sheet
I just purchased a 2014 2ss with a built motor... Cam/headers/ss exhaust with x pipe/pushrods/air box/MSD wires. car came with RPM motorsports (Raleigh NC) dyno sheet showing 474.74 HP/439.66 Tork the question is...Is this Crank or Rear wheel numbers
|
01-17-2017, 08:53 AM | #2 |
rear wheel.
|
|
01-17-2017, 08:53 AM | #3 |
|
That's rear wheel. Mine is almost exactly the same
|
01-17-2017, 09:17 AM | #4 |
Drives: 2014blackss Join Date: Oct 2016
Location: high point, NC
Posts: 7
|
Then to get crank numbers do you multiply by 1.1, 1.12 1.15% ?
|
01-17-2017, 09:39 AM | #5 |
Started#gottalovethatblue
|
Divide by .87 or .88 if you have a manual, divide by .8 if you have an auto.
__________________
|
01-17-2017, 09:45 AM | #6 |
Drives: 2014blackss Join Date: Oct 2016
Location: high point, NC
Posts: 7
|
THANKS so much for the info Guys!
|
|
|
|
|