So what mods do you have planned for this winter?

[Mike-ZL1]

Finally got head studs on had to drive 40 minutes to get them today at FedEx they needed me to sign for it in person what a pain in the a$$. But got them. got the heads all put back together will be installing them tomorrow morning.

[Mike-ZL1]

New springs real nice

[Sakudog]

Nice work! That deck looks clean!


Sent from my iPhone

[Mike-ZL1]

Originally Posted by Sakudog

Nice work! That deck looks clean!


Sent from my iPhone

Thanks the car only has 1500 miles so it wasn't that bad the old gasket actually stained the deck. I used brake clean and a plastic razor blade worked perfect your set up is going to be awesome good luck with it are you going to upgrade bottom end? Put heads back on this morning going to see Santa this afternoon with family so probably get it back together during the week

[Mike-ZL1]

Intake port

[Mike-ZL1]

Intake bowl

[Mike-ZL1]

The intake port is thin and already flows pretty good so I focused on the swirl and smoothing the port and port matching the supercharger. I still took a lot of material out just in the right places did a lot of research thank god for the inter web I took a lot of material out of the exhaust side that is the biggest restriction in the heads

[Sakudog]

Wow, looks great so far! Yes, on the motor. Sleeved LSA, Callies Rods, JE Pistons, main studs, Turbo Cam, etc.

Step one is to get the AGP system on and work out any and all bugs. Keep the boost down to 15 psi / 800 wheel and then get the motor installed in Jan/Feb.




Sent from my iPhone

[Aramirez1789]

I have a 2014 V6 LS Camaro. I'm looking to ad some horsepower to it, where do I start? I'm familiar with popular parts like intake, headers, intake manifold, suspension etc. I'm just looking for advice on what parts and what are some reasonable prices. Also some info on how to ad the hp the right way, without ruining my Camaro. I read this guy named Chris on super Chevy that got his v6 camaro to run 13s on a quarter mile.. Support if possible

[Mike-ZL1]

Originally Posted by Sakudog

Wow, looks great so far! Yes, on the motor. Sleeved LSA, Callies Rods, JE Pistons, main studs, Turbo Cam, etc.

Step one is to get the AGP system on and work out any and all bugs. Keep the boost down to 15 psi / 800 wheel and then get the motor installed in Jan/Feb.




Sent from my iPhone

That's the way to do it. it will be a beast.are you doing the work yourself?

[Sakudog]

Yes sir


Sent from my iPhone

[Mike-ZL1]

Originally Posted by Sakudog

Yes sir


Sent from my iPhone

Nice one thing to pay someone to do work for you (nothing against that) but nothing better than saying you did the work your self. Keep me posted on your build will be insain

[Mike-ZL1]

Originally Posted by Aramirez1789

I have a 2014 V6 LS Camaro. I'm looking to ad some horsepower to it, where do I start? I'm familiar with popular parts like intake, headers, intake manifold, suspension etc. I'm just looking for advice on what parts and what are some reasonable prices. Also some info on how to ad the hp the right way, without ruining my Camaro. I read this guy named Chris on super Chevy that got his v6 camaro to run 13s on a quarter mile.. Support if possible

You should go to the V6 forums they would be able to help you more than us V8 guys but engines are engines so start with getting more air in and more air out you can't go wrong with that.

[RedZL1]

Originally Posted by Mike-ZL1

Finally got head studs on had to drive 40 minutes to get them today at FedEx they needed me to sign for it in person what a pain in the a$$. But got them. got the heads all put back together will be installing them tomorrow morning.

Which stud kit did you go with, ARP?