Emblempros.com's prototype underhood bowtie pictures - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dragonZ28 · 05-11-2010, 09:09 PM

Quote:

Originally Posted by Shuffler

So your saying you can etch colored lettering in a piece of stainless? I'd like to see that.

I can cut all types of metals on my machine. I stay away from brass as all it takes is one flash and I'm replacing a $30,000.00 dollar mirror. I can cut wood and plastic too but I usually don't because the vent system has to be disconnected. It makes a mess.

I have a 6 killowatt Trumpf 5040 with liftmaster and Rotolas.

We don't do the white very often, but we do gold all of the time on our dash plaques.
We can do black, gold, white, and mill finish.

Check out the gold and black together.
http://www.emblempros.com/inc/sdetail/5021

Plastic is messy, and it can smell pretty bad. I was an engineer in a laser facility that's how we got started.

Shuffler · 05-11-2010, 11:29 PM

Quote:

Originally Posted by dragonZ28

We don't do the white very often, but we do gold all of the time on our dash plaques.
We can do black, gold, white, and mill finish.

Check out the gold and black together.
http://www.emblempros.com/inc/sdetail/5021

Plastic is messy, and it can smell pretty bad. I was an engineer in a laser facility that's how we got started.

On layered plastic yes..... not on stainless. That was what I meant.

What wattage laser do yall have. Generally signage lasers are around 60 watts.

We cut up to 1 1/2 inch carbon steel and 1 inch stainless and aluminum on ours.

I programmed this last week but have not run any yet. This is our clubs logo. It is a software test run looking for any collissions and such.
I recorded it on my phone. The white lines are positioning moves, magenta is etching, and green is cutting.

dragonZ28 · 05-12-2010, 06:13 AM

Quote:

Originally Posted by Shuffler

On layered plastic yes..... not on stainless. That was what I meant.

What wattage laser do yall have. Generally signage lasers are around 60 watts.

We cut up to 1 1/2 inch carbon steel and 1 inch stainless and aluminum on ours.

I programmed this last week but have not run any yet. This is our clubs logo. It is a software test run looking for any collissions and such.
I recorded it on my phone. The white lines are positioning moves, magenta is etching, and green is cutting.

That was a stainless dash plaque I showed you. Please look again. We can etch these colors on stainless. Read the part description in the sale page, it's stainless just like I said. I am not sure why you do not believe me, we sell them in STAINLESS all the time. Here is the link for you to read again.
We are also getting off topic.
http://www.emblempros.com/inc/sdetail/5021 Stainless with gold, and black etching!
One thing we will not do is disclose our equipment, i hope you understand.
I am very familiar with your type of machine. I have worked with many. Yours, Bystronics. Kern, Universal, etc....C02, Yag, nitrogen oxygen, etc... I used to program the head of a 5 axis laser for fixtures, and 3 dimensional tooling paths for automotive parts.
But this thread is for the hood bowties.

Thanks, Roger

Qwk SS · 05-12-2010, 07:41 AM

Gotta love 2 1/2 men!

Shuffler · 05-12-2010, 08:27 AM

I've been using lasers for some time now and have never seen one do color. Yall must be using a yag laser. Whole different wave length than the ones I use. Interesting indeed.
I see your just trying to sell. So I'll not ask anymore questions.

BTW the tag in the link you posted looks nice.

LadiesMan217 · 05-15-2010, 04:12 PM

Any updates on these?

LadyinBlue · 05-21-2010, 07:31 AM

Bump

JEFF2010SSMANUAL · 05-21-2010, 08:00 AM

6 TON EPOXY

Pumpkin1LT · 05-21-2010, 08:16 AM

When these get going I would be interested in one with LT1 on it.. It is VERY hard to find nice LT1 badges.. All I ever see are SS badges. LT's like to look hot too!

dragonZ28 · 05-21-2010, 01:35 PM

Quote:

Originally Posted by Pumpkin1LT

When these get going I would be interested in one with LT1 on it.. It is VERY hard to find nice LT1 badges.. All I ever see are SS badges. LT's like to look hot too!

If you want some LT1 badges for your car just let me know, you can get them anytime.

Thanks, Roger

agkelly73 · 05-22-2010, 10:04 AM

I'm so anxious for these! Definately a mod I'm going to do without hesitation! Roger, you guys do awesome work!

agkelly73 · 05-29-2010, 08:51 PM

Any updates?

viper1cobra · 05-29-2010, 09:03 PM

dragonZ28 · 05-29-2010, 09:53 PM

I will call this upcoming week to see if they will allow us to make these.
I fully expect that they will.
After that we need to send in parts for approval. Not sure of a timeline yet.
I will keep you posted as I find out information. It took about 4 months for the dash plaques.

Thanks, Roger

05-12-2010, 07:41 AM	#46
Qwk SS Drives: 2010 Camaro SS/RS Join Date: Jul 2009 Location: Roanoke Va Posts: 131	Gotta love 2 1/2 men! __________________ 2010 Black SS/RS 6manual.

05-12-2010, 08:27 AM	#47
Shuffler God Bless Dawson Drives: Synergy for my Daughter Join Date: Feb 2010 Location: Texas Posts: 3,057	I've been using lasers for some time now and have never seen one do color. Yall must be using a yag laser. Whole different wave length than the ones I use. Interesting indeed. I see your just trying to sell. So I'll not ask anymore questions. BTW the tag in the link you posted looks nice. __________________ Last edited by Shuffler; 05-12-2010 at 08:38 AM.

05-15-2010, 04:12 PM	#48
LadiesMan217 Drives: '10 IOM/IO 2SS/RS Join Date: Feb 2008 Location: MA Posts: 1,680 View My Garage	Any updates on these? __________________ Proud Member of NEC5!

05-21-2010, 08:16 AM	#51
Pumpkin1LT Drives: 2010 Camaro 2SS Join Date: May 2010 Location: Altus AFB, Oklahoma Posts: 861 View My Garage	When these get going I would be interested in one with LT1 on it.. It is VERY hard to find nice LT1 badges.. All I ever see are SS badges. LT's like to look hot too! __________________ A happy wife is one in the garage getting dirty under her 2010 Camaro!

05-29-2010, 09:03 PM	#55
viper1cobra Member Club Elite #131 Drives: 2017 50th Anniversary H50 2SS Join Date: May 2009 Location: Far West TEXAS Posts: 1,729 View My Garage	__________________

05-21-2010, 07:31 AM	#49
LadyinBlue Drives: 260HP/242TQ Join Date: May 2009 Location: Dayton, Ohio Posts: 707	Bump

05-21-2010, 08:00 AM	#50
JEFF2010SSMANUAL JEFF2010SSMANUAL Drives: IOM 2SS/RS LS3 Join Date: Aug 2008 Location: Northern IL Posts: 1,953	6 TON EPOXY

05-22-2010, 10:04 AM	#53
agkelly73 Drives: 2016 SS Convertible Join Date: Jun 2009 Location: Hope Mills, NC Posts: 419	I'm so anxious for these! Definately a mod I'm going to do without hesitation! Roger, you guys do awesome work!

05-29-2010, 08:51 PM	#54
agkelly73 Drives: 2016 SS Convertible Join Date: Jun 2009 Location: Hope Mills, NC Posts: 419	Any updates?

05-29-2010, 09:53 PM	#56
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,428	I will call this upcoming week to see if they will allow us to make these. I fully expect that they will. After that we need to send in parts for approval. Not sure of a timeline yet. I will keep you posted as I find out information. It took about 4 months for the dash plaques. Thanks, Roger

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bowtie Modification for the Heritage Grille with SS emblem	cerberus	Cosmetics and Lighting Modification Discussions	19	11-08-2011 08:26 AM
Underhood Bowtie	Orangeshehot	Cosmetics and Lighting Modification Discussions	4	01-04-2010 04:11 PM
Billet Bowties from ChevyMall	Angelina	Cosmetics and Lighting Modification Discussions	9	10-06-2009 11:04 AM
bowtie emblem for underhood padding	oldfart1941	Cosmetics and Lighting Modification Discussions	8	07-29-2009 06:41 AM
Underhood Bowtie	fixxer56	Cosmetics and Lighting Modification Discussions	31	02-06-2009 08:19 PM