14 1Le Night Fury Results - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jmh_0711 · 07-30-2016, 08:28 AM

Hello, I picked up my car yesterday, It rides like a dream, and it really pulls on the higher end. The Idle sound is just incredible, I feel I will be wasting alot more gas, just listening to it idle lol. Anyways down to numbers, with LT headers, intake, cam, and a conservative tune, she pushed out 472/430, overall im happy with this for now, I might throw something on exhaust wise to make it louder, other than that, next mod is Whipple! Thanks, to anyone who is interested.

Clarkstar · 07-30-2016, 10:48 AM

Did you have it done at late model throttle?

Jayjellyfish212 · 07-30-2016, 04:10 PM

Keep us updated on it! I am leaning to the night fury too

Jmh_0711 · 07-30-2016, 06:44 PM

Quote:

Originally Posted by Clarkstar

Did you have it done at late model throttle?

Yes I did!

Clarkstar · 07-31-2016, 06:47 PM

I was there, had the white one. Headers and a tune... I was very happy with LMT!

HELLsx · 08-04-2016, 09:38 PM

Quote:

Originally Posted by Jmh_0711

Hello, I picked up my car yesterday, It rides like a dream, and it really pulls on the higher end. The Idle sound is just incredible, I feel I will be wasting alot more gas, just listening to it idle lol. Anyways down to numbers, with LT headers, intake, cam, and a conservative tune, she pushed out 472/430, overall im happy with this for now, I might throw something on exhaust wise to make it louder, other than that, next mod is Whipple! Thanks, to anyone who is interested.

Is the NF cam a blower cam? Im looking at the whipple right now and im thinking of camming it to max its potential, but i didnt think the fury was a blower cam...

Im all puzzled up! Lol!! I see numbers close and even above 500 ttw with cam and LT's then i see some numbers like yours... Their all across the board!

I saw 650 ttw w the whipple, LT's and a cam/ TB. Is this about what you saw?

Hellsx

Thor142 · 08-05-2016, 10:28 AM

Quote:

Originally Posted by Jmh_0711

Hello, I picked up my car yesterday, It rides like a dream, and it really pulls on the higher end. The Idle sound is just incredible, I feel I will be wasting alot more gas, just listening to it idle lol. Anyways down to numbers, with LT headers, intake, cam, and a conservative tune, she pushed out 472/430, overall im happy with this for now, I might throw something on exhaust wise to make it louder, other than that, next mod is Whipple! Thanks, to anyone who is interested.

Are you tracking this car?

Jmh_0711 · 08-29-2016, 07:35 AM

Quote:

Originally Posted by HELLsx

Is the NF cam a blower cam? Im looking at the whipple right now and im thinking of camming it to max its potential, but i didnt think the fury was a blower cam...

Im all puzzled up! Lol!! I see numbers close and even above 500 ttw with cam and LT's then i see some numbers like yours... Their all across the board!

I saw 650 ttw w the whipple, LT's and a cam/ TB. Is this about what you saw?

Hellsx

Sorry for the late response. Yes I made sure the cam is blower compatable, look up chris poole on youtube, his 1le has the night fury and whipple. I could have gotten more power with a more aggressive cam setup, but I wanted to keep drivability and, because I will being doing the whipple later on Im satisfied with this power output.

Jmh_0711 · 08-29-2016, 07:36 AM

Quote:

Originally Posted by Thor142

Are you tracking this car?

Sorry for the late response. I am not, Ive always wanted to but have never gotten around to it.

WHAMMO · 08-29-2016, 12:49 PM

NF is a very solid cam. Cant go wrong! Solid numbers! What RPM did you make the peak hp?

L99CAMA2011 · 08-29-2016, 09:31 PM

Put 3" on that thing let the engine breath especially with the future blower.

Even on my cam only car with similar numbers the 3" SLP powerflow exhaust made the 2.5" incher feel like $H1T. Thank God I looked at the classifieds last weekend.

Jmh_0711 · 08-30-2016, 06:54 AM

Quote:

Originally Posted by WHAMMO

NF is a very solid cam. Cant go wrong! Solid numbers! What RPM did you make the peak hp?

Peak hp is at 6400 rpm which as we all know is 200 past redline on the ls3, but the fully built valvetrain helps me sleep at night.

Jmh_0711 · 08-30-2016, 07:01 AM

Quote:

Originally Posted by L99CAMA2011

Put 3" on that thing let the engine breath especially with the future blower.

Even on my cam only car with similar numbers the 3" SLP powerflow exhaust made the 2.5" incher feel like $H1T. Thank God I looked at the classifieds last weekend.

I was thinking about this, I just deleted my mufflers to fit my new 4inch dual tips so its 3" from axle back as of now.

Dyk-NO · 09-05-2016, 12:01 PM

solid cam, dyno'd at 500/449 same mods but with upgraded oil ,fuel pump, timing chain and ported everything done by Lethal Racing themselves.

07-30-2016, 08:28 AM	#1
Jmh_0711 Drives: 2014 2SS RS 1LE Ashen Gray Metalic Join Date: Mar 2015 Location: Fond du Lac, Wisconsin Posts: 88	14 1Le Night Fury Results Hello, I picked up my car yesterday, It rides like a dream, and it really pulls on the higher end. The Idle sound is just incredible, I feel I will be wasting alot more gas, just listening to it idle lol. Anyways down to numbers, with LT headers, intake, cam, and a conservative tune, she pushed out 472/430, overall im happy with this for now, I might throw something on exhaust wise to make it louder, other than that, next mod is Whipple! Thanks, to anyone who is interested.

07-30-2016, 04:10 PM	#3
Jayjellyfish212 Drives: 2014 1LE Join Date: Aug 2015 Location: Upstate NY Posts: 2,050 View My Garage	Keep us updated on it! I am leaning to the night fury too __________________ Car mods: never enough!

08-29-2016, 12:49 PM	#10
WHAMMO Drives: 13' 1LE Join Date: Apr 2012 Location: Canada Posts: 2,642	NF is a very solid cam. Cant go wrong! Solid numbers! What RPM did you make the peak hp? __________________ 13' 1LE Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me.

09-05-2016, 12:01 PM	#14
Dyk-NO Trust me I'm a Scientist. Drives: My wifey ;P Join Date: Jun 2010 Location: Houston, TX Posts: 1,118 View My Garage	solid cam, dyno'd at 500/449 same mods but with upgraded oil ,fuel pump, timing chain and ported everything done by Lethal Racing themselves. __________________ "From ZERO to a Tire-Burning HERO!" Mods: RotoFab CAI, SW Headers, HiFlo Cats, Borla Atak Catback, Nightfury Cam, Ported Heads,Intake,TB, melling pump, Morosso Oil Separator.

07-30-2016, 10:48 AM	#2
Clarkstar Drives: 2013 1SS 1LE Join Date: Jun 2016 Location: Ixonia wi Posts: 1,456	Did you have it done at late model throttle?

07-31-2016, 06:47 PM	#5
Clarkstar Drives: 2013 1SS 1LE Join Date: Jun 2016 Location: Ixonia wi Posts: 1,456	I was there, had the white one. Headers and a tune... I was very happy with LMT!

08-29-2016, 09:31 PM	#11
L99CAMA2011 Drives: One of the baddest handling Gen 5s Join Date: Feb 2011 Location: Masachusetts Posts: 4,177	Put 3" on that thing let the engine breath especially with the future blower. Even on my cam only car with similar numbers the 3" SLP powerflow exhaust made the 2.5" incher feel like $H1T. Thank God I looked at the classifieds last weekend.