You are browsing camaro5 
 |
|
06-21-2021, 05:32 PM
|
#1 |
    
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
AGP Fuel System Question
Anyone with the agp dual pump system, is there a way to switch the primary and secondary pumps? I have no fuel pressure when I try to turn my car on. Check all the fuses and relays and all look good. Also when I turn the key I can't hear the primary pump prime like it did before. TIA
__________________
AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6
|
|
|
|
06-21-2021, 05:38 PM
|
#2 |
|
IF you are using a Hobbs switch to control the secondary pump, just jumper across those two wires and it will activate the second pump. You can also swap the relay control wires, but if your system is mounted like mine, mine are in the spare tire well, and I'd have to pull out a sub box, methanol tank, and other items....
__________________
745RWHP/634RWTQ on 93 @ 10psi
806/676 on E85 @ 10psi  COTW 9/8/14 |
|
|
|
|
06-21-2021, 07:38 PM
|
#3 | |
|
Drives: 2014 1SS/RS, 2018 Silverado CC Join Date: Apr 2014
Location: Oceanside, CA
Posts: 1,487
|
Quote:
Thanks for the help, second pump does kick on so my primary is done.
__________________
AGP 57/57 turbos and Dual Pump System, NA Cam, McLeod RXT clutch, MGW shifter, ZL1 Rear End, BMR Trailing Arms/Toe Rods, Pegasus Solid Cradle Bushings 10.7 @140mph M6
|
|
|
|
|
|
06-21-2021, 08:26 PM
|
#4 |
|
2&THEHIT
Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018
Location: Garner, NC
Posts: 1,013
|
That sucks! Hope you get it straightened out
|
|
|
|
|
|
|
|
 |
|
|
