what do you all think of these strips?

[trooper182]

Thinking about adding stripes to my yellow camaro and came across these. what do you all think?

http://www.ebay.com/itm/Camaro-Yenko...ht_2066wt_1037

[IBM]

I just like how they show them on a die-cast car... hahaha

[deltakilo]

I like those a lot!

[PRECIOUS-SS]

hey what matters is if you like them, ur going to be ridding around in that. i personally dont like them, but hey my camaro is one soliid color. so i guess im into the clean no stripping look.

[angie7]

Just a word of caution from personal experience but the vinyl u find on ebay is cheap. My bf and I both bought some and within WEEKS it was peeling and u cld c where the vinyl was scraping off. These were even put on professionally. If u like that certain stripe, print it off and go to a local sign/vinyl shop and have them design it w a higher quality vinyl.

[kiteman]

when i looked at them, i thought that car was a charger.

[midlifemike]

Funny, I looked and thought it looked like the Challenger.

[2010 SSRS]

I like them

[whamslam3]

im not rly into those kinda stripes i would just get rally stripes or spears or somethin

[SSGUNNER]

Nice.

[Kite31]

Originally Posted by midlifemike

Funny, I looked and thought it looked like the Challenger.

Same here.

[PoorMansCamaro]

Not a fan

[Xmicro_SS]

I think they look ok, but graphics ARE ULTRA SUBJECTIVE!!

Just for all of your info. The difference in the price of vinyl supplies varies GREATLY based on quality and outdoor life expectancy. You usually get what you pay for, I have no idea what the vendor, that the OP is asking about, uses, nor am I commenting on his offerings. This is just general vinyl knowledge, that an educated buyer should have. If others are happy with their purchases over time, that is always the best gauge.

Just to give you an idea or supply cost differences.

A 24" x 10 yard roll of cheaper (short term) "name brand" vinyl will run about $25. 3 yr vinyl. Great for temporary, short term, exhibition or store front signage.

A 24" x 10 yard roll of premium (long term) CAST vinyl same "name brand" is about $70. Almost 3 times the cost. 8-10 year vinyl. Great for car graphics or long term store window applications!

So there is a major difference in material cost. Keep in mind, there is a ton of waste when cutting vinyl. The area around the graphics usually is almost equal to the area you use. And this gets "weeded" or picked away and thrown out. Vinyl also takes a great amount of time to do properly. So there are other areas vendors can cut back to save YOU money. But think to yourself, if YOU had to spend all that time, programing, cutting, weeded, masking, packing and then going to the post office, plus materials, you have to make something, unless you are very charitable.

This is why I say, you USUALLY get what you pay for. The tough thing is, some vendors take advantage of the fact that people do not know. And you really cannot tell how good the vinyl is, until time goes by. So in two years when it starts to peel, crack, or fade, you assume YOU did something wrong.

Just a FYI, but I have no idea what said vendor uses, you guys can always ask for the brand and series of vinyl being supplied and do the research before spending your hard earned dollars. Some of the vendors that put out a quality product get a bad wrap, because they charge a bit more. Then people go only for the cheap stuff and that causes slow vendors who are trying to maintain QUALITY to "step down" and offer a comparable product and price.

As you can tell I am in the business. I am one of the quality oriented people who have seen quality go out the window for price. That is the problem with this country. I call it the "CHINA SYNDROME". Everyone wants to Earn more and spend less. We are seeing now how that DOES NOT WORK!!

Here is some interesting factual info about vinyl, you may or may not appreciate. Enjoy!!

What Makes Vinyl Vinyl
Let's begin with a few of the basics on vinyl films. Most vinyl films are made from the same basic raw materials. We begin with polyvinylchloride (PVC) polymer, which is simply basic plastic, and is, by nature, relatively rigid. Other ingredients are then added to the PVC. These ingredients include: plasticizer to make the film flexible, pigment to make the desired color, and additives to help achieve specific properties such as UV absorbers to improve resistance to UV radiation, heat stabilizers, fillers and processing aids. These raw materials can be chosen from a wide range of quality levels. Of course, for a film with limited durability, often the least expensive raw materials are chosen.

Apart from the type of raw materials that are used at manufacturing, the manufacturing process and the type of plasticizer used create the main differences of vinyl films. Vinyl films can either be made by calendering or by casting. Each of these processes renders different qualities of films. Casting generally results in better quality films. The grade of plasticizer that is used to make the film flexible also greatly affects the grade of the film. Generally for pressure-sensitive adhesive films a choice is made between polymeric and monomeric plasticizers. We won't go into detail on the plasticizers in this article, but for simplicity's sake consider polymeric to be the higher grade and monomeric to be the economy grade plasticizer. The combination of these factors greatly determines the durability of vinyl films.

Cast Films
Cast films, also known in the industry as premium, high-performance or 2 mil are considered to be a premium product with excellent durability and conformability characteristics. The term "cast" refers to the manufacturing process of this type of vinyl. Making a cast vinyl film is a lot like baking a cake. The vinyl begins with a "recipe" calling for a list of ingredients known as the formulation. These materials are added to a "bowl" or mixing churn in a predetermined order while mixing at specific speed and for a set amount of time to ensure a complete and consistent mixture. This liquid mixture, known as organosol, is then "poured" or cast onto a moving web known as the casting sheet and is then processed through a series of ovens which allows for the evaporation of solvents. When the solvents are evaporated, a solid "film" is left behind. The film is then wound up in large-diameter rolls for subsequent adhesive coating. The casting sheet determines the texture of the film.

Because the vinyl is cast on the casting sheet in a relaxed state, this material offers very good dimensional stability. This process also allows the film to be very thin (most cast films are 2 mil), which helps with the conformability of the product. Material manufacturers recommend the use of cast films on substrates such as fleets, vehicles, recreational vehicles or boats where the customer wants a "paint-like" finish that will last a long time, usually five to eight years depending on how the film is processed.

But do not use thinness as a gauge of quality, there are thin films that are not cast, but are calendered (under 3mil). Just another FYI!

[HDDAN]

Originally Posted by PRECIOUS-SS

hey what matters is if you like them, ur going to be ridding around in that. i personally dont like them, but hey my camaro is one soliid color. so i guess im into the clean no stripping look.

I'm with you. when I ordered my car sight unseen on 10/13/08 and I was told that the stripes were dealer installed vinyl, I decided on the clean look also. No regrets, The vinyl stripes look fine from a distance, but look just like vinyl stick-ons up close.