You are browsing camaro5 
 |
|
11-15-2017, 06:36 AM
|
#15 | |
|
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,528
|
Quote:
|
|
|
|
|
11-15-2017, 01:33 PM
|
#16 |
|
SS
|
stand by for tail light wars 2! those 19 models are going to infuriate many , JRHAGEN GET READY!
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow cats
 Locks@7.5 degrees castor and radius arm inserts, Ride Tech 2coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings |
|
|
|
|
11-16-2017, 05:20 PM
|
#17 |
 Drives: 2SS 1LE Silver w/Recaro NPP Join Date: Feb 2014
Location: Chester county, PA
Posts: 139
|
I'm running a 10.5" x 19", 22mm offset with maximum negative camber and a 305 width Pirelli DH, which is not as wide as a street tire, because it has no rim protection. It is about a pencil thickness off the strut on the inside. The rear protrudes slightly, but it has no rubbing issues, and I'm lowered on Eibach springs.
If I had to do it again, I'd try to make 18" diameter work, for tire availability and cost considerations.
__________________
-BtrBimmer
'14 2SS 1LE NPP Recaros  |
|
|
|
|
11-16-2017, 05:49 PM
|
#18 |
  
Drives: 62 Chevy & 2021 1SS/1LE manual Join Date: Aug 2010
Location: Kentucky
Posts: 893
|
wish you were closer. i have a set of these for sale cheap.
https://www.discounttiredirect.com/b...geneva/p/23916 |
|
|
|
|
02-11-2018, 04:06 PM
|
#19 | |
|
SS
|
Quote:
__________________
CCW sp16a track set, BTR stage 3 cam and kooks longtubes with high flow cats
Locks@7.5 degrees castor and radius arm inserts, Ride Tech 2coilovers JDP upper control arm bushings BMR lower knuckle bushing Bo White throttle body3.91 gears Spohn del-sphere toe link and trailing arms Prothane subframe bushings |
|
|
|
|
|
|
|
|
 |
|
|
