Installing Roto-Fab CAI. Is this right?? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

burntOmaro · 11-28-2010, 06:01 PM

Heres a pic and what I'm not to clear on... Does this rubber hose go like this??

The Stig · 11-28-2010, 06:04 PM

Yes. Just make sure its on their snug

burntOmaro · 11-28-2010, 06:11 PM

OK... the pics in the instructions weren't very clear and they showed the tubing being routed under the engine cover but my tubing wasn't long enough. I'll try and make it look pretty later.

Roto-fab 1 · 11-29-2010, 07:35 AM

The hose should measure about 12 1/4" long. We route it straight back under the throttle body, then it goes towards goes outboard slightly and then straight back to the valve cover nipple. Here is a larger view of the picture included in the instructions. Of course, your hose is black. We used yellow for the installation instructions for clarity.
If your hose doesn't measure out correctly, please call the shop at (260) 375-4480 and we will have another one heading your way.

burntOmaro · 11-29-2010, 11:28 AM

Quote:

Originally Posted by Roto-fab 1

The hose should measure about 12 1/4" long. We route it straight back under the throttle body, then it goes towards goes outboard slightly and then straight back to the valve cover nipple. Here is a larger view of the picture included in the instructions. Of course, your hose is black. We used yellow for the installation instructions for clarity.
If your hose doesn't measure out correctly, please call the shop at (260) 375-4480 and we will have another one heading your way.

It's no biggie! Installation for this was a breeze. You guys make a top notch product. Definitely can tell a difference. I'll post up more pics once I get my engine all cleaned up

Roto-fab 1 · 11-29-2010, 10:09 PM

Awesome! Good to know you are happy with the product!

11-28-2010, 06:01 PM	#1
burntOmaro Bye Bye GD Drives: 2015 AGM SS (Everyday=1 day closer) Join Date: Oct 2010 Location: San Antonio Posts: 175	Installing Roto-Fab CAI. Is this right?? Heres a pic and what I'm not to clear on... Does this rubber hose go like this?? __________________ 2010 CGM 2SS RS. Atomic Orange Metallic Stripes. Corsa Cat-Back. MGW Short-Throw. H&R Springs. AAC Halo/Fogs. 20" Havoc Wheels. SRP Pedals. RX Catch Can. Kicker L7 & Amp in ******** Stealth. Garys Custom Fenders. Roto-Fab CAI. Pfadt Trailing Arms.

11-28-2010, 06:04 PM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Yes. Just make sure its on their snug __________________

11-28-2010, 06:11 PM	#3
burntOmaro Bye Bye GD Drives: 2015 AGM SS (Everyday=1 day closer) Join Date: Oct 2010 Location: San Antonio Posts: 175	OK... the pics in the instructions weren't very clear and they showed the tubing being routed under the engine cover but my tubing wasn't long enough. I'll try and make it look pretty later. __________________ 2010 CGM 2SS RS. Atomic Orange Metallic Stripes. Corsa Cat-Back. MGW Short-Throw. H&R Springs. AAC Halo/Fogs. 20" Havoc Wheels. SRP Pedals. RX Catch Can. Kicker L7 & Amp in ******** Stealth. Garys Custom Fenders. Roto-Fab CAI. Pfadt Trailing Arms.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unofficial 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	250	04-01-2014 10:40 AM
Roto Fab Engine Covers	VegasSS	5th Gen Camaro SS LS LT General Discussions	8	11-24-2010 11:41 PM
Installed a Roto Fab CAI and had some leftover paint	The Stig	Cosmetics and Lighting Modification Discussions	0	06-21-2010 02:11 PM
Installing headers and CAI	arfrc5	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	08-27-2009 08:27 AM

11-29-2010, 07:35 AM	#4
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	The hose should measure about 12 1/4" long. We route it straight back under the throttle body, then it goes towards goes outboard slightly and then straight back to the valve cover nipple. Here is a larger view of the picture included in the instructions. Of course, your hose is black. We used yellow for the installation instructions for clarity. If your hose doesn't measure out correctly, please call the shop at (260) 375-4480 and we will have another one heading your way.

11-29-2010, 10:09 PM	#6
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	Awesome! Good to know you are happy with the product!