How to install LT headers? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Dentyneice · 05-24-2009, 07:06 PM

Anyone know where to get instructions on how to install 1 7/8" LT headers on a 2ss M6? Can't find anything in google except for mustangs

MyNewSolstice · 05-24-2009, 07:39 PM

Is anyone as confused by this as I am? I am of the mindset the LT is a V6 and a 2SS is a V8 so to put headers on a v8 made for a v6 is imossible let alone Insane?!

my2010camaross · 05-24-2009, 07:40 PM

lt is the brand.

Gentry78 · 05-24-2009, 07:49 PM

Lt=long tube headers

Andro · 05-24-2009, 08:17 PM

Quote:

Originally Posted by Gentry78

Lt=long tube headers

What he said

DanD · 05-24-2009, 08:26 PM

as far as install... usually... just take off the stock manifolds and bolt up the headers, most will require one or two cuts to attach to the stock exhaust, I haven't had a chance to look at my car and see if there are clamps and where.. borrow or rent some time at a lift, save you a lot of hard work.

UsedTaHaveA68 · 05-24-2009, 11:05 PM

I don't know about these, but on the 4th gen F-bodies it was a lot easier to install the headers from the bottom. Some jack stands and a creeper will make things a lot easier probably.

Gentry78 · 05-24-2009, 11:11 PM

yeah on any car you have to go from the bottom there is no way to fit them through the top about the only vehicle you can go from the top is something like a 50-60's truck thats it, there's no other way on any modern car

just slide them through the bottom, bolt up top, might take a few hours but not that difficult just use some wobble extensions and things will go a lot smoother

2SSRS@Gen5diy · 05-25-2009, 11:24 AM

On a 66 nova if you get fender well long tube headers you can put them from the top.

Epitaph · 05-25-2009, 12:00 PM

I've not seen the Camaro's engine bay, but I do know this; even if you have the engine out, it does not make swapping to headers any easier. On top of that, if you're going to LT headers, you're going to need either a new exhaust system, or a few new parts to hook up to the original.

If you have no idea how to install LT's, get a shop to install them and a new system, that has done this before...or you're going to be paying out the ass for them to design one on the spot. Shops I went to around here said that they keep "plans" for each vehicle that they do exhausts for.

Dentyneice · 05-25-2009, 08:32 PM

I was hoping to keep the stock exhaust piping since I'm just going to use the cutout diverters from another post

UsedTaHaveA68 · 05-25-2009, 09:53 PM

Quote:

Originally Posted by Dentyneice

I was hoping to keep the stock exhaust piping since I'm just going to use the cutout diverters from another post

Any decent exhaust shop should be able to bend new piping to make it fit. If it won't fit there by the tranny, there will probably be enough room somewhere farther back.

Vash · 05-25-2009, 10:51 PM

Quote:

Originally Posted by Dentyneice

Anyone know where to get instructions on how to install 1 7/8" LT headers on a 2ss M6? Can't find anything in google except for mustangs

So if no one can find the service manual how did you expect to find it on google?

Takes time for aftermarket to develop. (short answer).

Perfectd3 · 06-01-2009, 01:57 PM

Quote:

Originally Posted by Dentyneice

Anyone know where to get instructions on how to install 1 7/8" LT headers on a 2ss M6? Can't find anything in google except for mustangs

Go to the Grrrr8.net forum and hit up the exhaust forum. Look for a GXP how to.

05-24-2009, 07:06 PM	#1
Dentyneice Drives: 2010 Camaro 2ss Join Date: Apr 2009 Location: new Jersey Posts: 254	How to install LT headers? Anyone know where to get instructions on how to install 1 7/8" LT headers on a 2ss M6? Can't find anything in google except for mustangs __________________ 2010 CGM/Black 2SS M6 20% Tint -:- Hurst 44% Short Throw Shifter -:- Viper 5901 Alarm/Remote start -:- High Gloss Black Painted Calipers + White Brembo Decal

05-24-2009, 08:26 PM	#6
DanD Drives: 6 camaros Join Date: Feb 2009 Location: ma Posts: 320	as far as install... usually... just take off the stock manifolds and bolt up the headers, most will require one or two cuts to attach to the stock exhaust, I haven't had a chance to look at my car and see if there are clamps and where.. borrow or rent some time at a lift, save you a lot of hard work. __________________ 2010 IOM RS/SS TVS2300, cam, stall, headers 2002 Z28 427 2002 SSLE Convertible 1968 383 Camaro 1968 327 Camaro Convertible 1967 RS 327 1967 Pro-Tour LS3 in progress

05-25-2009, 08:32 PM	#11
Dentyneice Drives: 2010 Camaro 2ss Join Date: Apr 2009 Location: new Jersey Posts: 254	I was hoping to keep the stock exhaust piping since I'm just going to use the cutout diverters from another post __________________ 2010 CGM/Black 2SS M6 20% Tint -:- Hurst 44% Short Throw Shifter -:- Viper 5901 Alarm/Remote start -:- High Gloss Black Painted Calipers + White Brembo Decal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
Headers for the V6?	Xanthos	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	49	08-04-2011 12:51 PM
EXHAUST	Milk 1027	Wiki	2	03-07-2010 09:20 PM
Shorty headers	1fine79	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	1	05-13-2009 09:19 AM
Headers Question	SIK07GTSTANG	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	9	04-23-2009 07:14 PM

05-24-2009, 07:39 PM	#2
MyNewSolstice Drives: 06 Solstice Join Date: Apr 2009 Location: Pittsburgh Posts: 349 View My Garage	Is anyone as confused by this as I am? I am of the mindset the LT is a V6 and a 2SS is a V8 so to put headers on a v8 made for a v6 is imossible let alone Insane?!

05-24-2009, 07:40 PM	#3
my2010camaross ss Drives: all black ss Join Date: Dec 2008 Location: texas Posts: 331	lt is the brand.

05-24-2009, 07:49 PM	#4
Gentry78 HOOK'EM Drives: 97 c1500/92 olds Join Date: Oct 2008 Location: Texas Posts: 5,279	Lt=long tube headers

05-24-2009, 11:05 PM	#7
UsedTaHaveA68 Drives: Hyundai Sonata Join Date: Feb 2009 Location: Little Rock, AR Posts: 497	I don't know about these, but on the 4th gen F-bodies it was a lot easier to install the headers from the bottom. Some jack stands and a creeper will make things a lot easier probably.

05-24-2009, 11:11 PM	#8
Gentry78 HOOK'EM Drives: 97 c1500/92 olds Join Date: Oct 2008 Location: Texas Posts: 5,279	yeah on any car you have to go from the bottom there is no way to fit them through the top about the only vehicle you can go from the top is something like a 50-60's truck thats it, there's no other way on any modern car just slide them through the bottom, bolt up top, might take a few hours but not that difficult just use some wobble extensions and things will go a lot smoother

05-25-2009, 11:24 AM	#9
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	On a 66 nova if you get fender well long tube headers you can put them from the top.

05-25-2009, 12:00 PM	#10
Epitaph Custom User Title Drives: Fast Join Date: Jan 2009 Location: San Diego, CA Posts: 550	I've not seen the Camaro's engine bay, but I do know this; even if you have the engine out, it does not make swapping to headers any easier. On top of that, if you're going to LT headers, you're going to need either a new exhaust system, or a few new parts to hook up to the original. If you have no idea how to install LT's, get a shop to install them and a new system, that has done this before...or you're going to be paying out the ass for them to design one on the spot. Shops I went to around here said that they keep "plans" for each vehicle that they do exhausts for.