06-16-2013, 10:47 PM | #1 |
Drives: 2010 camaro ss Join Date: Sep 2012
Location: Joliet IL
Posts: 110
|
Removing A6 transmission
Is there somewhere I can find a write up on how to remove an auto trans? I took out 7 bolts but can't get the trans to drop.
|
06-17-2013, 09:34 AM | #2 |
Jason
Drives: 2011 2SS/RS M6 Join Date: Apr 2011
Location: Richmond, Va
Posts: 341
|
Check this out. I think there are 8 bolts, so you may still have one to remove.
__________________
Kook's headers w/ high flow cats, Borla S-Type, VMAX ported throttle body, CAI Inc. intake, Jannetty race scoop, Roto-Fab washer bottle relocation, Jannetty rough idle blower cam, DSS 9" w/ 3.70 gears, RPM Level 6 trans, Street Slayer Twin Carbon clutch, MGW Shifter, Pfadt trailing arms.
|
06-17-2013, 10:11 AM | #3 |
Drives: 2012 Camaro SS. L99 Join Date: Nov 2012
Location: Panama City FL
Posts: 113
|
the one you are forgetting to take out is most likely the very top bolt. the one the vent tube is connected to you have to remove a nut that holds the bracket for the tube then remove the bolt for the bell housing
|
06-17-2013, 11:49 AM | #4 |
Drives: 2010 camaro ss Join Date: Sep 2012
Location: Joliet IL
Posts: 110
|
Ill have to check it out when I get home from work. I stuck my hand up there but couldn't feel the bolt. I can't see it either.
|
06-19-2013, 05:33 PM | #5 |
Drives: 2010 camaro ss Join Date: Sep 2012
Location: Joliet IL
Posts: 110
|
I got it out. Thanks!
|
|
|
|
|