03-02-2013, 11:00 PM | #1 |
Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009
Location: Jefferson, Ga
Posts: 4,399
|
Stereo noob!
Getting a Kicker SX600.2 amp for pretty much free, need/would like to know a good speaker(s) to go with this! Also which harness would I need to use from sub thump ? Like I said, new to the car audio world! Any help is appreciated!
__________________
|
03-03-2013, 12:04 PM | #2 |
Drives: 2011 Synergy Green Camaro LT Join Date: Jul 2011
Location: Lakeland, FL
Posts: 830
|
You could get 1 good solid 12" in a dual 2 ohm setup and bridge the speaker or 2 lighter 12" single 2 ohm speakers. Really depends on if you wanna run 1 or 2 subs. either go 2 Kicker comps or 1 Kicker CVR if you wanna keep it all kicker
|
03-03-2013, 03:39 PM | #3 |
Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009
Location: Jefferson, Ga
Posts: 4,399
|
Yeah, I'm thinking of getting one of sub thumps stealth boxes! So go with a 2 ohm sub???
__________________
|
03-03-2013, 10:29 PM | #4 |
Drives: 2011 Synergy Green Camaro LT Join Date: Jul 2011
Location: Lakeland, FL
Posts: 830
|
If you want the most power which is 550w at 4ohm bridged you need either a single dual 2 ohm, which wired in series equals 4ohm or if you buy 2 subs get single 2ohm voice coild, wire the subs in series to create a 4ohm load. so one sub = dual voice coils @ 2ohm, for two subs=single voice coil @ 2ohm
|
|
|
|
|