Hurst Short throw came today. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SIXJAK · 04-26-2012, 07:35 PM

Woot.

fargomike · 04-26-2012, 07:39 PM

Congrats you will love it. Got mine on last weekend its like a new car again.

Ventmaster · 04-26-2012, 08:01 PM

Good looking piece of equipment!

Remember our V6's have centering springs that slows the install a bit..
You can't just yank the old shifter out like they do in the video.

Also, I didn't re-use the springs, just left'em out without adverse effect IMHO.

SIXJAK · 04-26-2012, 09:21 PM

Thanks for the tips hopefully it goes on Saturday. I gots two shift knobs. One for an LS3 and one for a V6. Thank you Auto Agenda.

John@AutoAgenda · 04-26-2012, 09:24 PM

Quote:

Originally Posted by SIXJAK

Thanks for the tips hopefully it goes on Saturday. I gots two shift knobs. One for an LS3 and one for a V6. Thank you Auto Agenda.

You're very welcome, thank you for the support!! For sure let us know how you like it.

SIXJAK · 04-28-2012, 11:43 AM

Is there a vid for the install? How long did this take u guys.?

OOLIE · 04-28-2012, 12:34 PM

Looking forward to seeing how you like it!

SIXJAK · 04-28-2012, 01:42 PM

Gaaaah why does grown up life suck so much sometimes. Not gonna be able to get to it. Found the install video. Obviously going to have to let the car sit and cool down. Did not realize I had to get under this thing LOL. What a noob. Sometime next week then. I like that there's the option of leaving your stock gear shifter lever and knob in tact. Not that that's what I'M going to do but still. They prolly are all that way. Noob strikes again.

United_727 · 04-28-2012, 07:31 PM

Quote:

Originally Posted by Ventmaster

Good looking piece of equipment!

Remember our V6's have centering springs that slows the install a bit..
You can't just yank the old shifter out like they do in the video.

Also, I didn't re-use the springs, just left'em out without adverse effect IMHO.

I installed mine today at work. It was going easy until the part where I had to drop it down. Those damn springs slowed the install to a crawl. My buddy had a hell of a time releasing them. I ended up removing them and tossing them. I would hate to do this job without a lift.

What an improvement,though. WOW!! So much crisper and accurate. The stock shifter was way too stiff and vague.

Anyone know where I can get the v6 white shift know shown in the OP pic in the Hurst bag?

AutoAgenda · 04-28-2012, 08:19 PM

Quote:

Originally Posted by United_727

I installed mine today at work. It was going easy until the part where I had to drop it down. Those damn springs slowed the install to a crawl. My buddy had a hell of a time releasing them. I ended up removing them and tossing them. I would hate to do this job without a lift.

What an improvement,though. WOW!! So much crisper and accurate. The stock shifter was way too stiff and vague.

Anyone know where I can get the v6 white shift know shown in the OP pic in the Hurst bag?

Hurst Shifter is a major improvement, especially for the cost.

We have the 3.6L Shift Pattern ball, give us a call! 1(888)257-1422

We will be getting this along with other Shift Knob alternatives up soon!

flavp5 · 04-28-2012, 10:06 PM

do you have to pay extra for the v6 shift knob? if ordered though AA

CamaroV6 · 04-29-2012, 08:19 AM

Congrates sixjax I love mine and it give's a nice touch to the interior of the car with the white ball and chrome handle if yo go that route. Also it a amazing product that make's your car feel a lot better over stock!

install is easy just take of the spring's inside holding the shifter and the part will come off easy and i left mine out also and have been fine for like 3 month's now.

United_727 · 04-29-2012, 08:27 AM

Quote:

Originally Posted by flavp5

do you have to pay extra for the v6 shift knob? if ordered though AA

Yes,it comes with the v8 pattern. Or you can just live with the v8 pattern.

SIXJAK · 04-29-2012, 09:31 AM

Quote:

Originally Posted by United_727

Yes,it comes with the v8 pattern. Or you can just live with the v8 pattern.

Ppl will be duped into thinking you drive an LS3.

04-26-2012, 07:35 PM	#1
SIXJAK Drives: MO's only SC'd LLT. Join Date: Feb 2010 Location: Branson MO Posts: 2,574 View My Garage	Hurst Short throw came today. Woot. __________________ IPF supercharger kit, IPF tune, SW LT's, R. Tech HFC's, ARK DT-S catback, SS Brembo brake upgrade, BC Racing adjustable coilovers, Hurst STS, Pfadt rear arm package, Pfadt adjustable sways & end links, Pfadt diff bushings, BMR rear cradle full kit blk bezels,SS diffuser, Innovate gauges.

04-26-2012, 07:39 PM	#2
fargomike The Dude Abides Drives: Black 2SS M6 Join Date: Apr 2010 Location: Fargo , ND Posts: 489	Congrats you will love it. Got mine on last weekend its like a new car again. __________________ 2010 Black 2SS/LS3/M6 Kooks 1 7/8 Ceramic Coated Headers, Borla ATAK CB , JRE Tune , Halltech Yellow Jacket CAI ,VMax Ported TB, PFADT Coilovers,Forgestar CF5's Textured Gunmetal w/Nitto Invo's 275/315 ,Hurst Billet Plus 2 Shifter AAC P13W Plasma LEDw/DRL Harness ,30% Tinting,

04-26-2012, 09:21 PM	#4
SIXJAK Drives: MO's only SC'd LLT. Join Date: Feb 2010 Location: Branson MO Posts: 2,574 View My Garage	Thanks for the tips hopefully it goes on Saturday. I gots two shift knobs. One for an LS3 and one for a V6. Thank you Auto Agenda. __________________ IPF supercharger kit, IPF tune, SW LT's, R. Tech HFC's, ARK DT-S catback, SS Brembo brake upgrade, BC Racing adjustable coilovers, Hurst STS, Pfadt rear arm package, Pfadt adjustable sways & end links, Pfadt diff bushings, BMR rear cradle full kit blk bezels,SS diffuser, Innovate gauges.

04-28-2012, 11:43 AM	#6
SIXJAK Drives: MO's only SC'd LLT. Join Date: Feb 2010 Location: Branson MO Posts: 2,574 View My Garage	Is there a vid for the install? How long did this take u guys.? __________________ IPF supercharger kit, IPF tune, SW LT's, R. Tech HFC's, ARK DT-S catback, SS Brembo brake upgrade, BC Racing adjustable coilovers, Hurst STS, Pfadt rear arm package, Pfadt adjustable sways & end links, Pfadt diff bushings, BMR rear cradle full kit blk bezels,SS diffuser, Innovate gauges.

04-28-2012, 12:34 PM	#7
OOLIE Drives: 2011 LS Join Date: Oct 2010 Location: FL Posts: 1,643	Looking forward to seeing how you like it! __________________

04-26-2012, 08:01 PM	#3
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 2,869	Good looking piece of equipment! Remember our V6's have centering springs that slows the install a bit.. You can't just yank the old shifter out like they do in the video. Also, I didn't re-use the springs, just left'em out without adverse effect IMHO.

04-28-2012, 01:42 PM	#8
SIXJAK Drives: MO's only SC'd LLT. Join Date: Feb 2010 Location: Branson MO Posts: 2,574 View My Garage	Gaaaah why does grown up life suck so much sometimes. Not gonna be able to get to it. Found the install video. Obviously going to have to let the car sit and cool down. Did not realize I had to get under this thing LOL. What a noob. Sometime next week then. I like that there's the option of leaving your stock gear shifter lever and knob in tact. Not that that's what I'M going to do but still. They prolly are all that way. Noob strikes again. __________________ IPF supercharger kit, IPF tune, SW LT's, R. Tech HFC's, ARK DT-S catback, SS Brembo brake upgrade, BC Racing adjustable coilovers, Hurst STS, Pfadt rear arm package, Pfadt adjustable sways & end links, Pfadt diff bushings, BMR rear cradle full kit blk bezels,SS diffuser, Innovate gauges.

04-28-2012, 10:06 PM	#11
flavp5 Drives: 2011 victory red 1LT coupe Join Date: Mar 2012 Location: Newfoundland, Canada Posts: 79	do you have to pay extra for the v6 shift knob? if ordered though AA

04-29-2012, 08:19 AM	#12
CamaroV6 Account Suspended Drives: Camaro V6 1LT Manual Join Date: Jul 2011 Location: Miami FL Posts: 514	Congrates sixjax I love mine and it give's a nice touch to the interior of the car with the white ball and chrome handle if yo go that route. Also it a amazing product that make's your car feel a lot better over stock! install is easy just take of the spring's inside holding the shifter and the part will come off easy and i left mine out also and have been fine for like 3 month's now.