03-12-2013, 12:31 AM | #1 |
Jacking Points
Can anyone tell me where the jacking points are on a '67? I want to make sure I am doing it the right way. If anyone has a picture of where to jack it up, that would be even better!
|
|
03-12-2013, 12:41 AM | #2 |
Drives: IOM 2010 Camaro 2ss Join Date: Jan 2013
Location: Vegas
Posts: 34
|
check the dimples on the body seem below the rockers
https://www.google.com/search?q=cama...F%3B1024%3B768 |
03-12-2013, 01:11 AM | #3 |
Drives: 2023 Silverado LTZ, 2022 Camaro 2SS Join Date: Jul 2010
Location: Arkansas
Posts: 322
|
Jack the front end under the sub-frame cross-member under the engine, or under the spring seat area of the lower control arms. Jack the back under the center of the axle housing.
|
03-13-2013, 07:18 PM | #4 |
Not easy being Green
Drives: 67 Nova SS Join Date: Nov 2008
Location: Olympia, WA
Posts: 2,256
|
Don't use the front cross member with out using some type plate steal or wood block to capture the full area of the frame or it will cause it to dish in over time. It's not supported by anything and the steal is thin.
Not my car, but I did the same thing to fix mine a very common problem and how to fixed it.
__________________
Last edited by GrnMchin; 03-14-2013 at 06:58 PM. |
|
|
Thread Tools | |
|
|