11-10-2013, 05:27 PM | #29 |
Account Suspended
Drives: TAMPA TUNING FACEBOOK & INSTAGRAM Join Date: Oct 2010
Location: Tampa, Fl
Posts: 3,044
|
Very nice work!
Your pulling a little fuel at WOT according to your fuel trims, but really nice job!!! Phil |
11-10-2013, 06:24 PM | #30 |
|
The little joke about giving up being a doctor and settling to be a dentist bit
__________________
2010 2SS - CAI Intake, ADM Scoop, RotoFab Washer relo. LT Headers and off-road pipes, X-pipe, Muffler Deletes, ZL1 Spoiler, Technostalgia Tail-lights
'98 T/A (Sold) - Forged 6.0ltr, MS3, P&P'd Heads/Valves, 90MM FAST/TB, Headers, 3" Y-pipe, 4" Mufflex Catback. Koni Adjustables w/GC coilovers (550/175), Strano Sway Bars '94 Z28 (Sold) ... LS1 swap (basically same setup as the T/A), TH350/3500 stall ... swapped it all into the T/A -- >> Some of my Projects My Fquick Page |
11-10-2013, 07:10 PM | #31 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
|
11-10-2013, 07:36 PM | #32 |
Drives: 2011 ctsv Join Date: Sep 2013
Location: fort myers fl
Posts: 45
|
Awesome job!!
I do a lot of tuning and flashing ecu's for motorcycles. Can u let me know what program your using and what do you use as an interface Thanks |
11-10-2013, 09:24 PM | #33 | |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
Quote:
And as far as the fuel trims you should have seen it with some 100% gasoline I found at a local station. I have tuned it with the common fuel available around here that has about 5% ethanol. With no ethanol in the fuel, the fuel trims drop to -10%. Just goes to show you how much worse MPG is with ethanol gas blend.
__________________
Bryan 2018 ZL1 M6
|
|
11-10-2013, 09:28 PM | #34 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
Not just E67's. That's the case with all the LS based engines. The old LT1 engines would add fuel at WOT if fuel trims are too high. But the LT1's would never subtract fuel at WOT.
__________________
Bryan 2018 ZL1 M6
|
11-10-2013, 10:00 PM | #35 | |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
Quote:
I don't think I've seen commanded EQ be affected or IPW? I remember the BLM locker tool (that I think Jordan Musser wrote?) that used to lock the LT1's to 0 trims at wot. |
|
11-10-2013, 10:35 PM | #36 | |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
Quote:
I Think Christian Millard wrote it, I'm sure Jordan was using it back in the day. Haven't seen Jordan in a few years now. But anyway every LS car I have tuned will go into negative LTFT's at WOT if the tune is rich.
__________________
Bryan 2018 ZL1 M6
|
|
11-10-2013, 10:58 PM | #37 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
OK I take that back. I went back and looked at some old tunes of LS6 and LS1's and LTFT's at WOT are always "0" or positive #'s. But the E67 will pull fuel at WOT.
__________________
Bryan 2018 ZL1 M6
|
11-10-2013, 11:05 PM | #38 |
Drives: 02 Z06, 95 Trans Am, 2012 ZL1 Join Date: Mar 2012
Location: Southeast
Posts: 1,838
|
But I did find some scans of my TBSS with an LS2 and E40 PCM where it will pull fuel at WOT.
__________________
Bryan 2018 ZL1 M6
|
11-11-2013, 01:57 AM | #39 |
Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011
Location: houston
Posts: 1,312
|
That only matters to some of us,,and these motors if tuned correctly and if not beaten to death are all most built proof..
He has not gone into the motor yet,and everything can be R&R again really easy,if needed... Correct I am sure. I know that i asked FASTLANE about that right before i dropped it off there,and they gave me the number to the dealer they use to purchase the GM vehicles for their customers who are wanting something with a warranty.Anyway he told me that if I had any engine related mods done to my ZL1 that it would not effect any coverage on my car what so ever...plus all of my work is covered under FASTLANES warranty ,as well are the parts covered by LPE warranty since fastlane is a AUTH installer,etc....Thats another reason to pay the correct shop to install the parts,instead of doing it at home. But to be honest before I became wheelchair bound i normally did it at my own shop or at home nor caring about the warranty..
__________________
http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .
|
11-12-2013, 10:11 AM | #40 |
Snake Eater
Drives: 2012 AGM ZL1 Join Date: Oct 2011
Location: TN
Posts: 2,737
|
So, how can you keep your warranty? Have you been to Memphis Motorsports ( I think that what its called) track in Memphis/Millington?
__________________
Build Thread: http://www.camaro5.com/forums/showth...95#post8351295
Make sure you don’t forget to subscribe to my channel! More content on the way. Like, share with your friends https://www.youtube.com/channel/UC9Z...sP2wjsLLFeP1zQ Follow me on instagram: http://www.instagram.com/snkeatr/ |
11-12-2013, 10:43 AM | #41 |
Drives: 2015 2LT Torch Red C7 Stingray Join Date: Jul 2012
Location: Chicago
Posts: 1,807
|
Nicely done Bryan!
|
11-12-2013, 04:18 PM | #42 |
instigator
Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010
Location: 72034
Posts: 3,979
|
nice job...but question...you made a hair under 620whp and run 1/8th in 7.92@9x.x??
__________________
-John S.
|
|
|
|
|