Evap System for Boosted V6- Mine - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sikoriko · 09-25-2013, 01:47 PM

Or tap in a vacuum pump sucking through a catch can. another rx idea?

sycraft · 10-02-2013, 07:38 PM

Back on topic: I received the can and breather today, nice stuff. Locating a place to mount it. On the front fits best. will post pics mounted and plumbed when done. I have to get some hose to finish. there is no way to overpressurize the system as the oil breather and can have a great bypass to let out pressure. there is a quality one way boost valve in the can too. more later

sycraft · 10-03-2013, 08:54 AM

some pics of the install, will drive and see how it performs... the breather and the can have a one way valve venting pressure, no unmetered air entering system...

hunterv6 · 10-03-2013, 09:48 AM

I like my wrinkle black should be here soon.

sycraft · 10-03-2013, 09:57 AM

You getting the mm setup?

hunterv6 · 10-03-2013, 10:02 AM

Yea

Sent from my iPad2 on space mountain

SIXJAK · 10-03-2013, 12:58 PM

Very cool. Does this breather work with the existing CC in the IPF kit.

sycraft · 10-03-2013, 03:34 PM

Quote:

Originally Posted by SIXJAK

Very cool. Does this breather work with the existing CC in the IPF kit.

Yes it will , it vents only, no fresh coming in. My system uses the IPF can as a inlet can only, fresh air enters through that can and will catch moisture coming in or out freeley, the new can is all about the intake, it draws from the intake manifold, there is a check valve to prevent backflow and pulls air through the motor. there is no way to pressurize the engine and it now breathes.....

Ventmaster · 10-05-2013, 07:35 PM

OK, I'm confused. Are we thinking the IPF system alone is less than adequate?

What are the potential benefits of additional cans?

sycraft · 10-05-2013, 07:39 PM

Quote:

Originally Posted by Ventmaster

OK, I'm confused. Are we thinking the IPF system alone is less than adequate?

What are the potential benefits of additional cans?

I can never leave anything alone, the IPF system does a great job venting, but offers no real fresh air circulation, that's why I changed mine up. I will say that some of my idle issues and occasional stalling have been reduced because of this setup. It feels "smoother" overall. Perhaps the added air entering the intake under vacuum helps the engine idle better. All the incoming air is metered and there is no way to overpressurize the system.

Lil' Nasty · 10-05-2013, 07:43 PM

Like the clarification Clint, might just add this to my list of things to get..which is a long list

Nutbutt · 10-05-2013, 07:53 PM

Liken this a lot !

JohnnyBfromPeoria · 10-06-2013, 08:01 AM

For whatever reason, it would help me if I could see the layout scribbled on the back of a napkin to follow what and where everything is.

John B.

sycraft · 10-06-2013, 08:07 AM

Quote:

Originally Posted by JohnnyBfromPeoria

For whatever reason, it would help me if I could see the layout scribbled on the back of a napkin to follow what and where everything is.

John B.

here

10-02-2013, 07:38 PM	#30
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	Back on topic: I received the can and breather today, nice stuff. Locating a place to mount it. On the front fits best. will post pics mounted and plumbed when done. I have to get some hose to finish. there is no way to overpressurize the system as the oil breather and can have a great bypass to let out pressure. there is a quality one way boost valve in the can too. more later __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

10-03-2013, 08:54 AM	#31
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	some pics of the install, will drive and see how it performs... the breather and the can have a one way valve venting pressure, no unmetered air entering system... Attached Images __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

10-03-2013, 09:48 AM	#32
hunterv6 Always bet on Black Drives: 2011 turbo LS, 2012 f 150, Join Date: Nov 2010 Location: Concord Nc Posts: 1,983	I like my wrinkle black should be here soon. __________________

10-03-2013, 09:57 AM	#33
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	You getting the mm setup? __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

10-03-2013, 10:02 AM	#34
hunterv6 Always bet on Black Drives: 2011 turbo LS, 2012 f 150, Join Date: Nov 2010 Location: Concord Nc Posts: 1,983	Yea Sent from my iPad2 on space mountain __________________

09-25-2013, 01:47 PM	#29
Sikoriko Drives: 2011 V6 IOM Join Date: Jul 2012 Location: San Diego Posts: 1,385 View My Garage	Or tap in a vacuum pump sucking through a catch can. another rx idea?

10-03-2013, 12:58 PM	#35
SIXJAK Drives: MO's only SC'd LLT. Join Date: Feb 2010 Location: Branson MO Posts: 2,574 View My Garage	Very cool. Does this breather work with the existing CC in the IPF kit. __________________ IPF supercharger kit, IPF tune, SW LT's, R. Tech HFC's, ARK DT-S catback, SS Brembo brake upgrade, BC Racing adjustable coilovers, Hurst STS, Pfadt rear arm package, Pfadt adjustable sways & end links, Pfadt diff bushings, BMR rear cradle full kit blk bezels,SS diffuser, Innovate gauges.

10-05-2013, 07:35 PM	#37
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 2,869	OK, I'm confused. Are we thinking the IPF system alone is less than adequate? What are the potential benefits of additional cans?

10-05-2013, 07:43 PM	#39
Lil' Nasty [COTW 4/13/15] Drives: Supercharged LLT Join Date: Jul 2010 Location: Florida Posts: 5,957	Like the clarification Clint, might just add this to my list of things to get..which is a long list __________________ LiL' Nasty's Build Journal

10-05-2013, 07:53 PM	#40
Nutbutt Drives: 2011 RJT 2LT/RS Convertible Join Date: Nov 2009 Location: Western Massachusetts Posts: 3,381 View My Garage	Liken this a lot ! __________________ 1st IPF Supercharged 2011 2LT/RS RJT Convertible

10-06-2013, 08:01 AM	#41
JohnnyBfromPeoria Drives: 2012 LS M6, Black Join Date: May 2009 Location: Phoenix, AZ Posts: 2,045	For whatever reason, it would help me if I could see the layout scribbled on the back of a napkin to follow what and where everything is. John B.