04-20-2012, 05:09 PM | #1 |
Drives: 2012 2SS 45th Anniversary LS3 Join Date: Jan 2012
Location: Dayton Nevada
Posts: 667
|
StentS 45th AE LS3
Let The Games Begin.....
I ordered BMR trailing arms and toe rods, cradle and diff bushings, upper control arm bushings and outer trailing arm bushings, Hurst Billet Short Throw, 4 Race Ramps Wheel Cribs 12", 4 24" 6 ton Jack Stands, 24 volt cordless 1/2" impact wrench with deep wall sae and metric impact sockets, lb ft and inch lb torque wrenches, high lift low profile floor jack and Flowmaster outlaw cat back exhaust today from Summit. I also ordered an SCT tuner with tunes, V-Max ported throttle body and a CAI from JRE. I also ordered Kooks 1 7/8 ceramic coated headers with high flow cats from Maryland Speed. Looks like I will be real busy for a while. Lots of pics when everything arrives and during the installation of it all.
__________________
Last edited by StentS; 04-23-2012 at 11:34 AM. |
04-20-2012, 09:28 PM | #2 |
Drives: 2012 45th Anniversary 2SS Join Date: Mar 2012
Location: West Chester Ohio
Posts: 1,845
|
What didn't you order... Lol awesome
|
04-20-2012, 09:53 PM | #3 |
Drives: 2012 2SS 45th Anniversary LS3 Join Date: Jan 2012
Location: Dayton Nevada
Posts: 667
|
The blower cam kit and the supercharger... that's next year .... umm or maybe later this year haha
__________________
|
04-22-2012, 05:32 PM | #4 |
Drives: 2012 2SS 45th Anniversary LS3 Join Date: Jan 2012
Location: Dayton Nevada
Posts: 667
|
Christmas in April !!
Some of my parts showed up.. I am stoked !!! Can't wait for everything else to arrive.....
__________________
|
04-22-2012, 09:04 PM | #5 |
Jackson's COTW
Drives: 1968 Camaro & 2010 Camaro 2SS Join Date: Jul 2009
Location: Chalmers, Indiana
Posts: 1,740
|
Stoked sounds like an understatement!! Have fun doing the work...Glad to see jack stands...be safe!!...ABL99......
__________________
|
04-23-2012, 11:17 AM | #6 |
HT5 COTW 9/3/2012
|
|
04-23-2012, 11:33 AM | #7 |
Drives: 2013 Camaro 2SS/RS 1LE Join Date: Sep 2010
Location: Commerce, GA
Posts: 3,873
|
Well that will certainly get you started
__________________
|
04-23-2012, 11:37 AM | #8 |
|
Awesome list of mods, have fun and post lots of pics.
__________________
Jannetty Racing JRE Street Package
|
04-23-2012, 11:48 AM | #9 |
Drives: 2012 2SS 45th Anniversary LS3 Join Date: Jan 2012
Location: Dayton Nevada
Posts: 667
|
Thanks Guys,
I can't wait to get started, but I will have to as some of the parts are back ordered until May 9th...... I really don't want to start on things that I will just have to remove again to install something else. Vince
__________________
|
04-26-2012, 12:27 AM | #10 |
Drives: 2012 2SS 45th Anniversary LS3 Join Date: Jan 2012
Location: Dayton Nevada
Posts: 667
|
Another box showed up today with caliper paint and the BMR toe rods...
Also spoke with Kris at Jannety today and he is shipping the CAI, Vmax throttle body and the SCT tuner today.... WOOHOOOOO!!!!!!!!!!!!!!! Vince
__________________
|
04-26-2012, 12:42 AM | #11 |
LS3 Black Widow
Drives: 2012 45th 2SS LS3 and 1968 Mustang Join Date: Nov 2011
Location: Madison, GA
Posts: 4,557
|
EPIC!
Definitely subbing to this thread! I especially want to see how the trailing arms and Vmax throttle body treat you, both install and performance wise. I've been thinking about both of those for a while. Trailing arms should help reduce wheel hop right? The throttle body is one of those things I've always been skeptical of their performance claims. Also, what color are you going for caliper paint? People told me to get my calipers powdercoated but it's $200 for that, no thanks, not now at least.
__________________
|
04-27-2012, 03:56 PM | #12 |
Drives: 2012 2SS 45th Anniversary LS3 Join Date: Jan 2012
Location: Dayton Nevada
Posts: 667
|
Bored
Today I got bored waiting on parts so I figured I would do a test run on getting the car up on the Race Ramps Wheel Cribs. Piece of cake and look at all the clearance under the car now!! Took me longer to get the ramps out and the jack than it did to get the car up on them. 7 pumps on the jack and it was high enough...
__________________
|
04-27-2012, 04:04 PM | #13 | |
Drives: 2012 2SS 45th Anniversary LS3 Join Date: Jan 2012
Location: Dayton Nevada
Posts: 667
|
Quote:
The throttle body alone will gain some on an otherwise stock car. But with headers, a tune and CAI it makes a dramatic difference from everyone I have spoken with. I am going with rustoleum red caliper paint and it is pretty close to the red on the stripe on the hood. It was cheap and I figured as I will have the calipers hanging in the back anyway, I might as well do them. If it doesn't look good, I can always go the cover route. There are some nice ones out there now. Vince
__________________
|
|
05-02-2012, 05:40 PM | #14 |
Drives: 2012 2SS 45th Anniversary LS3 Join Date: Jan 2012
Location: Dayton Nevada
Posts: 667
|
More Parts
Lots of stuff showed up today... V-Max Ported Throttle Body, CAI inc. CAI (SC version for the future Whipple) and SCT Tuner from JRE. Flowmaster Outlaw Catback exhaust, BMR Upper Control Arm Bushings (rear), BMR Toe Rods, BMR Rear Outer Trailing Arm Bushings, Rustoleum Caliper Paint Kit and a Hat from Summit. Kooks High Flow Cats...
Still waiting for the Moroso Catch Can, BMR Rear Cradle/Differential Bushings and the Ceramic Coated 1 &/8 Long Tubes... I will start installing everything when all the parts are here. Today I am going to upload the stock tune from the car and email it to JRE as requested along with info on the mods I am installing so they can send me the custom tune....
__________________
|
|
|
|
|