ABL Light Pipes - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sjmautoprod · 11-08-2011, 08:15 PM

As the original source for these has recently dried up, we have found a second source for a very similar product.

We also have a flexible version that can be used for other applications.

The minimum bend radius is about 1.5"

Continuous can be free-cut and works well for shorter lengths.

Tuned is for longer lengths and has a special pattern to minimize dimming in the middle. These can be cut, but, equal amounts should be taken from each end.

Expanded can be free-cut and is for flex applications where there are multiple bends which would make alignment difficult.

Sized for no-drill ABL mod (LED's under panel, not behind dash).

Note that 2013+ cars require three holes to be drilled into the dash to pass the LED's through.

Complete Dash Kit - from $71
http://sjmautoprod.com/5th-gen-Camaro-Dash-ABL-Kit.html

Dash Pipe Package - $25
Driver-Side (Continuous, Flex) and Passenger-Side (Tuned, Rigid).
http://sjmautoprod.com/5th-gen-camar...-pipe-kit.html

Driver Side Flex - $9
For those who have rigid pipes and are not happy with the panel fitment.
http://sjmautoprod.com/light-pipes-5mm.html

Door Panels - Per Door
Top of Panel: Flex, Tuned: $17 (2LT/SS stock setup)
http://sjmautoprod.com/Interior/5th-...Pipes-Top.html

Bottom of Panel: Flex, Tuned: $20 (order both for full-panel lighting)*
* Requires custom door panel
http://sjmautoprod.com/Interior/5th-...es-Bottom.html

Wiring

Dash Harness
T-Tap/Solder: $23
Plug-n-Play: $48 - ZL1 version available upon request
http://sjmautoprod.com/5th-gen-camar...n-harness.html

Standard Color LED's: $12 ea.
http://sjmautoprod.com/5th-Gen-Camar...o-ABL-LED.html

Splitter: $13 ea.
3-Way Splitter (for full door panels): $18 ea.

Pipes For Customizing (all free-cut)
Rigid, Continuous, 39.4" [1000mm]: $12.92
Rigid, Expanded, 39.4" [1000mm]: $14.25
Flex, Expanded, 39.4" [1000mm]: $20
Flex, Expanded, 78.7" [2000mm]: $28.52

Custom lengths can also be provided.

http://sjmautoprod.com/Light-Pipes-5mm.html

Prices do not include shipping.

*TAG UR IT* · 11-09-2011, 12:13 AM

I already have mind done. BUT...I'd LOVE to see one of these in person!

Will you be selling the light pipes with LED's included? ...that match GM's lights?

Or, is it just the light tubes.

BTW, these look MUCH brighter than the GM ones. Is that how they are or is that the LED that makes it look that way???

Last question. Does the back have a ridge which amplifies the light?....like the original Tyco light pipe?

The Stig · 11-09-2011, 06:01 AM

sjmautoprod · 11-09-2011, 07:04 AM

This is just for the pipe, but, we can get LED's, too.

Not sure how these compare to the originals.

There is a feature on the back for directing the light.

bee sting · 11-09-2011, 07:22 AM

*TAG UR IT* · 11-09-2011, 07:46 AM

Quote:

Originally Posted by sjmautoprod

This is just for the pipe, but, we can get LED's, too.

Not sure how these compare to the originals.

There is a feature on the back for directing the light.

That's the most important part, IMHO....the "ridge" that runs the length of the light pipe. This ridge is what amplifies the light out in one direction from the tube (long ways). That's the part that shines upwards and hits the dash creating the light effect from behind the dash applique. If you've seen the back of any 2LT or 2SS door which has the ABL, you can see the light pipe and see what I mean.

Hopefully....it'll have this. If it does, you are 100% on the right track for ABL to be done the right way!

The Stig · 11-09-2011, 08:12 AM

I have a piece of tyco light pipe in my glove box. I can take a picture to show you what Tag is talking about.

*TAG UR IT* · 11-09-2011, 08:29 AM

Go ahead and post it. Let's see if that's going to be the same light pipe.

I talked with Brandon Kasprowicz from Digi Key over the last couple days trying to find if they could get the light pipe. He said that it would basically have to be a VERY large order for them to place the order with TC Communications. I wonder if they could even order them....probably not.

sjmautoprod · 11-09-2011, 09:33 AM

Thanks, but, we have seen the TE light pipe, just not when they were powered.

As I said, these do have a feature for directing the light.

The Stig · 11-09-2011, 03:02 PM

Here you go.

sjmautoprod · 11-09-2011, 03:43 PM

Yessir, that's it. I'll shoot a similar video later tonight with our pipe.

The Stig · 11-09-2011, 05:06 PM

Can I put my name down for the pre order? I figure I'm going to need like 8 feet.

sjmautoprod · 11-09-2011, 06:43 PM

Eight feet? Doing multiple cars?

Here's the video...

The Stig · 11-09-2011, 07:12 PM

Quote:

Originally Posted by sjmautoprod

Eight feet? Doing multiple cars?

Here's the video...

I just have some ideas. You said yours is flexible, can you post a video of you bending it?

11-08-2011, 08:15 PM	#1
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	ABL Light Pipes As the original source for these has recently dried up, we have found a second source for a very similar product. We also have a flexible version that can be used for other applications. The minimum bend radius is about 1.5" Continuous can be free-cut and works well for shorter lengths. Tuned is for longer lengths and has a special pattern to minimize dimming in the middle. These can be cut, but, equal amounts should be taken from each end. Expanded can be free-cut and is for flex applications where there are multiple bends which would make alignment difficult. Sized for no-drill ABL mod (LED's under panel, not behind dash). Note that 2013+ cars require three holes to be drilled into the dash to pass the LED's through. Complete Dash Kit - from $71 http://sjmautoprod.com/5th-gen-Camaro-Dash-ABL-Kit.html Dash Pipe Package - $25 Driver-Side (Continuous, Flex) and Passenger-Side (Tuned, Rigid). http://sjmautoprod.com/5th-gen-camar...-pipe-kit.html Driver Side Flex - $9 For those who have rigid pipes and are not happy with the panel fitment. http://sjmautoprod.com/light-pipes-5mm.html Door Panels - Per Door Top of Panel: Flex, Tuned: $17 (2LT/SS stock setup) http://sjmautoprod.com/Interior/5th-...Pipes-Top.html Bottom of Panel: Flex, Tuned: $20 (order both for full-panel lighting)* * Requires custom door panel http://sjmautoprod.com/Interior/5th-...es-Bottom.html Wiring Dash Harness T-Tap/Solder: $23 Plug-n-Play: $48 - ZL1 version available upon request http://sjmautoprod.com/5th-gen-camar...n-harness.html Standard Color LED's: $12 ea. http://sjmautoprod.com/5th-Gen-Camar...o-ABL-LED.html Splitter: $13 ea. 3-Way Splitter (for full door panels): $18 ea. Pipes For Customizing (all free-cut) Rigid, Continuous, 39.4" [1000mm]: $12.92 Rigid, Expanded, 39.4" [1000mm]: $14.25 Flex, Expanded, 39.4" [1000mm]: $20 Flex, Expanded, 78.7" [2000mm]: $28.52 Custom lengths can also be provided. http://sjmautoprod.com/Light-Pipes-5mm.html Prices do not include shipping. Attached Images Last edited by sjmautoprod; 02-27-2018 at 06:14 PM. Reason: Added links

11-09-2011, 06:01 AM	#3
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	__________________

11-09-2011, 07:22 AM	#5
bee sting Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010 Location: Suffolk Virginia Posts: 1,933 View My Garage	__________________

11-09-2011, 08:12 AM	#7
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	I have a piece of tyco light pipe in my glove box. I can take a picture to show you what Tag is talking about. __________________

11-09-2011, 03:02 PM	#10
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Here you go. __________________

11-09-2011, 12:13 AM	#2
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	I already have mind done. BUT...I'd LOVE to see one of these in person! Will you be selling the light pipes with LED's included? ...that match GM's lights? Or, is it just the light tubes. BTW, these look MUCH brighter than the GM ones. Is that how they are or is that the LED that makes it look that way??? Last question. Does the back have a ridge which amplifies the light?....like the original Tyco light pipe?

11-09-2011, 07:04 AM	#4
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	This is just for the pipe, but, we can get LED's, too. Not sure how these compare to the originals. There is a feature on the back for directing the light.

11-09-2011, 08:29 AM	#8
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	Go ahead and post it. Let's see if that's going to be the same light pipe. I talked with Brandon Kasprowicz from Digi Key over the last couple days trying to find if they could get the light pipe. He said that it would basically have to be a VERY large order for them to place the order with TC Communications. I wonder if they could even order them....probably not.

11-09-2011, 09:33 AM	#9
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Thanks, but, we have seen the TE light pipe, just not when they were powered. As I said, these do have a feature for directing the light.

11-09-2011, 03:43 PM	#11
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Yessir, that's it. I'll shoot a similar video later tonight with our pipe.

11-09-2011, 05:06 PM	#12
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Can I put my name down for the pre order? I figure I'm going to need like 8 feet. __________________

11-09-2011, 06:43 PM	#13
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	Eight feet? Doing multiple cars? Here's the video...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who is up for an install day for the dash ABL? (Updated)	2010SSRSM6	USA - California	565	07-10-2012 08:41 PM
Jba catted mud pipes....check engine light on?	Camarowguy	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	13	07-23-2011 08:35 AM
WTB: ABL Light Pipe 2058296-1 Tyco	irocnroll	Interior Parts & Accessories	13	05-20-2011 08:20 PM
Those with LT's, RESET your check engine light!	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	107	08-18-2010 01:51 AM
ABL lighting and Footwell Light Install?	JProberts	USA - Mid-Atlantic	3	02-25-2010 10:17 PM