Spoilers anyone?

[Rideskinz]

Originally Posted by MyKuLLSKI

I remember reading that you wanted the spoiler to cover all the factory holes. The other day I washed my car and took off the trunk liner and I noticed that for this to work the center post has to be like 6inches. I feel likes thats huge

The center post will not require drilling into the trunk lid. It will use double stick tape or silicone adhesive to attach. The center post is there for support.

Originally Posted by Rhyder

Any word on the Not quite fire breather?

if get a chance and have them, could you PM me the estimate on CF version?

Not quite fire breather? I think you should refer to it as the "better than fire breather"...haha... I can't give you an estimate on the CF version till I'm done with the prototype and I figure out manufacturing costs. We're working on the mold

Originally Posted by Tysen

I thought the same thing until I saw one in person. It's too big, takes up too much space on the trunk. I even had one on order and canceled it. Get a top view before you buy one of these.

I agree. Way too big

[MikeMoach]

Any news to update us on?

[Rhyder]

bump for update

[Rideskinz]

Update: Back to the drawing board as far as getting a car in for prototyping. TCAT ran into some problems with CHP and can't drive the car down till he gets everything taken care of. So we'll probably end up getting a rental Camaro to do the work. Popped the firebreather out of the mold the other day. Gonna start on the new fiberglass prototype tomorrow. Will have pics up by the end of the week.

[markmass]

Originally Posted by Rideskinz

Update: Back to the drawing board as far as getting a car in for prototyping. TCAT ran into some problems with CHP and can't drive the car down till he gets everything taken care of. So we'll probably end up getting a rental Camaro to do the work. Popped the firebreather out of the mold the other day. Gonna start on the new fiberglass prototype tomorrow. Will have pics up by the end of the week.

Very good -- Im' hanging out for a purchase until i see how it turns out...The spoiler is the final change after ZL1 rockers, ZL1 diffuser and hydro-carbon splitter.....oh, and the ACS T3 ports and lights....

[MGD]

Need to get this to the top...
Where are we with the new design? Any pics yet? In need for a wing.

[Dtrimpi87]

Originally Posted by MGD

Need to get this to the top...
Where are we with the new design? Any pics yet? In need for a wing.

+1

[Jeffm]

goes to KFC and gets this guy a wing

[Rideskinz]

Here's the progress on the fiberglass prototype so far:
Took 2" out of the width (front to back)
Flattened the middle of the top surface
Fixed outer edges so they flow better

To do list:
Add the "kick up" on the back side, for more of a dovetail look.
Change the design of the outer points
Move the outer creases further outward
Flatten the "V" shape on the leading edge

We'll be getting a Camaro in the shop next saturday for further prototyping and test fitting and will have better pics to post. Till then this is all you get...

[Rhyder]

Nice, thx....getting harder to hold off on other Mod's

So would you say at least a month from now? If so Ill pull the trigger on some other stuff, Ill have more mod money next month to make up the difference.....any guestimate of price yet? With the understanding it will only be ballpark....

[Tysen]

Awesome. Exactly what I was looking for, and the reason I didn't go with the Firebreather.

[whamslam3]

Originally Posted by Rideskinz

Here's the progress on the fiberglass prototype so far:
Took 2" out of the width (front to back)
Flattened the middle of the top surface
Fixed outer edges so they flow better

To do list:
Add the "kick up" on the back side, for more of a dovetail look.
Change the design of the outer points
Move the outer creases further outward
Flatten the "V" shape on the leading edge

We'll be getting a Camaro in the shop next saturday for further prototyping and test fitting and will have better pics to post. Till then this is all you get...

looks cool cant wait

[MGD]

Now we're talking, get this thing done...I'll buy the first one.

[Rideskinz]

Originally Posted by Rhyder

Nice, thx....getting harder to hold off on other Mod's

So would you say at least a month from now? If so Ill pull the trigger on some other stuff, Ill have more mod money next month to make up the difference.....any guestimate of price yet? With the understanding it will only be ballpark....

I don't really want to put an exact date on when they'll be done and end up going back on my word later because manufacturing can't pump them out in time. Ideally I would like to get them done by at least mid December, but don't quote me on that. Ballpark estimate on pricing for unpainted fiberglass wing will be around $395-$425. I still have to see if manufacturing will be able to do the carbon fiber versions. If so, they will probably be around $495-$525. I'm also thinking about offering a paint match option for the fiberglass, not sure on the pricing for that yet but it will most likely be under $200