05-02-2012, 09:13 PM | #1 |
Drives: Camaro 2011 RS Convertible Join Date: Feb 2012
Location: Spring, Tx
Posts: 145
|
Paintless dent repair?
I took my car to the dealer for warranty work and asked if they could perform paintless dent repair on my barely visible door ding. They said they couldn't do it because it's on a crease. Anyone had this done on a similar ding?
|
05-02-2012, 09:24 PM | #2 |
Drives: 2010 Camaro 2SS/RS Join Date: Dec 2009
Location: Grand Prairie, Texas
Posts: 1,608
|
Yes I have. It can be done, find another PDR guy. I just had a fender ding removed today, and it was on the crease. Can't tell it was ever there.
__________________
94 Firebird Formula (Drowned 08/30/05)
2010 IBM 2SS/RS 6M Arrived 3/25/10. ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, 1LE Shocks, Hotchkis Sway Bars, Whiteline Cradle Bushing Inserts, Custom Powdercoated ZL1's ,Michelin Pilot Supersports, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller. |
05-02-2012, 09:33 PM | #3 |
|
i had one removed on passanger door by dealers pdr guy and it looks like it never was hit ! right on the crease below door handle and my car is black you need to try another shop if they cant fix it !
__________________
|
05-02-2012, 09:40 PM | #4 |
Drives: 2017 1SS Blue Join Date: Mar 2010
Location: Saint Peters, MO USA
Posts: 2,063
|
There are reinforcement brackets (kinda like wall studs) behind the metal skins of fenders and doors. If your ding is on the bracket/stud it cannot be repaired by PDR guy.
__________________
|
05-05-2012, 04:48 PM | #5 |
Drives: 2016 Garnet Red 1SS Join Date: Feb 2011
Location: Tucson
Posts: 208
|
I've had two dings pretty much in same spot as yours. I used a mobile PDR guy and he got them perfect.
|
05-05-2012, 05:16 PM | #6 |
|
I have one in the very same spot. When I pulled the panel off to look at it, the dent isn't there. I'm not a body guy, but I don't know how they could fix it.
|
05-05-2012, 07:18 PM | #7 |
Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011
Location: ROCKMART, GA
Posts: 2,185
|
I had a PDR friend here in GA fix a couple in the same exact spot.
|
05-05-2012, 07:27 PM | #8 |
Drives: 2013 Hot Wheels Special Edition Join Date: May 2009
Location: Auburn,Mass
Posts: 1,333
|
I have had a couple dings orsmall dents removed on the crease and they had no problem getting them out.
|
05-17-2012, 02:02 AM | #9 |
Drives: 2014 Bright Yellow ZL1 Vert/M6 Join Date: Apr 2012
Location: Spokane, Washington
Posts: 551
|
I had one just aft of the passenger door handle dead center on the crease, it was actually on the car when I purchased it new, dealership had it out in less than 2 hours and you can't even tell it was there.
__________________
|
05-22-2012, 09:00 AM | #10 |
If you took the door panel off and couldn't see it it's behind the stud/brace in the door and to fix that they are cutting the glue that holds the brace to the door. Making it weak I know this because we own a body shop!!! Just my thoughts
__________________
2012 Camaro SS, CAI,VMax TB,LT ARH, HF Cats,Borla Type-S,LPE3.70 Gears, If I can't eat it, bet on it, or bang it I probably don't have the phone number!!!!! |
|
|
|
|
|