5th gen drag radial build - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

diamondmike · 06-20-2012, 05:40 PM

here's a link for the story on my drag radial 5th gen. please let me know what you think .

http://www.gmhightechperformance.com...yss/index.html

carbon8 · 06-20-2012, 06:14 PM

Any videos of this car??????

Quick · 06-20-2012, 09:03 PM

I can't imagine what a 8 second 1/4 mile run would feel like.....AWESOME build.

Supercharged SS · 06-20-2012, 09:10 PM

Bad ass indeed!

For comparisons sake....any chance you could give us an idea on what is invested into the car as it stands now? Just to see what really beaing fasts costs vs the $100k+ that guys are dumping into their vin cars.

acatlover13 · 06-21-2012, 04:48 AM

Sa-weet!!!

*The Stig* · 06-21-2012, 07:46 AM

congrats on the write up

MudderFinger · 06-21-2012, 08:29 AM

Awesome!

Ivan @ Southwest Speed · 06-21-2012, 09:53 AM

About time the world knows who Mike is......

Congrats as always brotha. Well deserved my man!
Ivan

diamondmike · 06-21-2012, 04:11 PM

Quote:

Originally Posted by Supercharged SS

Bad ass indeed!

For comparisons sake....any chance you could give us an idea on what is invested into the car as it stands now? Just to see what really beaing fasts costs vs the $100k+ that guys are dumping into their vin cars.

great question but hard to answer.lol

body in white 8k
front k member with brakes and race struts 6k
front and rear facsia 1k
rear end 2k and up
roll cage 10pt start 2500.00/ 25.5 8k
trans 2k
smart wire 1500.00
motor from3k to 25k and 40k if you want to get freaky.lol
all the glass 1500.00
interior is up to u lots of parts online i put carpet on the floor 50.00 bucks
dash 175
long and short is about 24k plus motor these cars can be lighten to under 2800lbs. sooooo how much faster would your car be 1500 lbs lighter???

Padre · 06-21-2012, 04:54 PM

Quote:

Originally Posted by diamondmike

great question but hard to answer.lol

body in white 8k
front k member with brakes and race struts 6k
front and rear facsia 1k
rear end 2k and up
roll cage 10pt start 2500.00/ 25.5 8k
trans 2k
smart wire 1500.00
motor from3k to 25k and 40k if you want to get freaky.lol
all the glass 1500.00
interior is up to u lots of parts online i put carpet on the floor 50.00 bucks
dash 175
long and short is about 24k plus motor these cars can be lighten to under 2800lbs. sooooo how much faster would your car be 1500 lbs lighter???

Awesome Mike! I was rooting for you in Atlanta. We met at the first LSX Shootout in Memphis back in 2007. I was driving an 11.5 GTO back then.

Here's a video of me in the staging lanes against a 171mph TA. You're mentioned from the tower in the first part of the video:

Padre

diamondmike · 06-21-2012, 06:25 PM

Quote:

Originally Posted by Padre

Awesome Mike! I was rooting for you in Atlanta. We met at the first LSX Shootout in Memphis back in 2007. I was driving an 11.5 GTO back then.

Here's a video of me in the staging lanes against a 171mph TA. You're mentioned from the tower in the first part of the video:

Padre

thats cool as hell I won. 10 sec true street that year. You still got the goat? I sold mine

diamondmike · 06-21-2012, 06:27 PM

Quote:

Originally Posted by Ivan @ Southwest Speed

About time the world knows who Mike is......

Congrats as always brotha. Well deserved my man!
Ivan

Thanks bro

jrpxxii · 06-21-2012, 09:44 PM

Quote:

Originally Posted by Supercharged SS

Bad ass indeed!

For comparisons sake....any chance you could give us an idea on what is invested into the car as it stands now? Just to see what really beaing fasts costs vs the $100k+ that guys are dumping into their vin cars.

Mike is just the smart guy of the bunch instead of the few dumba$$ like myself who buy a VIN car and gut it to a body in white and spend twice the money. This is one bad mofo of a car.

blackflag · 06-22-2012, 12:21 AM

Awesome build. Cool to see the torque arm suspension setup. Who did the front suspension?

se7en · 06-22-2012, 06:40 AM

Very happy for you Mike and your build. Ive read a lot about your racing and i know how much work you have in this thing. Cant wait to see what it will do with the new heads

Are you running a 4 stage nitrous system?

diamondmike · 06-22-2012, 07:20 AM

Quote:

Originally Posted by blackflag

Awesome build. Cool to see the torque arm suspension setup. Who did the front suspension?

extreme fab he's here on c5

diamondmike · 06-22-2012, 07:22 AM

Quote:

Originally Posted by se7en

Very happy for you Mike and your build. Ive read a lot about your racing and i know how much work you have in this thing. Cant wait to see what it will do with the new heads

Are you running a 4 stage nitrous system?

no it's two stage we leave on 300 and 150 more comes on .8 out .the motor has been 1.15 to the 60 and 7.91 in the 1/4

Pro Stock John · 06-22-2012, 11:53 AM

Always enjoy hanging out with you at the races. I owe you a pack of smokes and a power drink sir, let me pick up dinner one night in Bowling Green!

se7en · 06-22-2012, 11:58 AM

Quote:

Originally Posted by diamondmike

no it's two stage we leave on 300 and 150 more comes on .8 out .the motor has been 1.15 to the 60 and 7.91 in the 1/4

Very nice! What system are you using?

diamondmike · 06-22-2012, 05:27 PM

Quote:

Originally Posted by se7en

Very nice! What system are you using?

induction solutions punisher/2nd fogger

Rockit_z28 · 06-23-2012, 06:50 AM

Famtastic car and better yet an incredible build. If you have not read the story, I suggest doing so.

Mike - You scared the p*** out of my son at the CHP Nationals when you fired that beast up.

diamondmike · 06-23-2012, 07:08 AM

Quote:

Originally Posted by Rockit_z28

Famtastic car and better yet an incredible build. If you have not read the story, I suggest doing so.

Mike - You scared the p*** out of my son at the CHP Nationals when you fired that beast up.

Opps,sorry she is a little loud, and thanks the guys at gmht did a great job. We are working on the next part on the storty now

Zman12 · 06-23-2012, 08:00 AM

Great article!

06-20-2012, 05:40 PM	#1
diamondmike Drives: 2SS/RS Join Date: Nov 2009 Location: Destin, fl Posts: 401	5th gen drag radial build here's a link for the story on my drag radial 5th gen. please let me know what you think . http://www.gmhightechperformance.com...yss/index.html __________________ 7.83 @ 172 and 1.15 60ft 5th gen 4.93@143

06-20-2012, 09:03 PM	#3
Quick Drives: 2012 Camaro SS 45th Join Date: Oct 2011 Location: Union City,Tn. Posts: 737	I can't imagine what a 8 second 1/4 mile run would feel like.....AWESOME build. __________________ OBX 1 7/8 LT's w/high flow cats. Doug Thorley catback w/x pipe. Cold air intake by CAI w/apex scoop.V-max ported throttle body.DynoSpeed tuned by Forest.369 rwhp/385 rwtq Something wicked this way cometh...

06-20-2012, 09:10 PM	#4
Supercharged SS Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 8,447	Bad ass indeed! For comparisons sake....any chance you could give us an idea on what is invested into the car as it stands now? Just to see what really beaing fasts costs vs the $100k+ that guys are dumping into their vin cars. __________________ 9.80 @ 139.73, 1.45 60', 2010 Jannetty Racing L99

06-21-2012, 04:48 AM	#5
acatlover13 Emerald Coast Camaros Drives: 2010 2SS/RS Camaro IOM/IO Join Date: Aug 2009 Location: Lynn Haven, Florida Posts: 2,292 View My Garage	Sa-weet!!! __________________ ECC on Facebook 2010 Camaro SS/RS IOM, IO interior, Custom Striping by Eddie's Autobody, Razzi body kit ADM CAI w/scoop/Dynatech Headers & Hi-Flow Cats/Solo Performance Exhaust, FTI 3600 Stall/Comp Cams custom grind cam/LS3 conversion/FAST 102 Intake

06-21-2012, 07:46 AM	#6
The Stig I used to be Stieger.... Drives: a PBM camaro Join Date: Aug 2009 Location: Northern VA Posts: 25,723 View My Garage	congrats on the write up __________________ thanks for the sig Russ

06-20-2012, 06:14 PM	#2
carbon8 Drives: 2010 Camaro SS,2008 Hayabusa Join Date: Jun 2010 Location: Yukon,Oklahoma Posts: 627	Any videos of this car??????

06-21-2012, 08:29 AM	#7
MudderFinger Drives: 2011 IOM SS/RS Join Date: Dec 2010 Location: Virginia Posts: 563 View My Garage	Awesome! __________________ My Build Thread

06-21-2012, 09:53 AM	#8
Ivan @ Southwest Speed Southwestspeed.net Drives: '10 2SS/RS, '96 Z28 Join Date: May 2009 Location: Rio Rancho, NM Posts: 10,314	About time the world knows who Mike is...... Congrats as always brotha. Well deserved my man! Ivan __________________ The Sizzle Build / Follow us on Facebook!! / Aut ism Speaks

06-22-2012, 12:21 AM	#14
blackflag Drives: 2012 2SS 45th Join Date: Feb 2012 Location: South Posts: 378 View My Garage	Awesome build. Cool to see the torque arm suspension setup. Who did the front suspension? __________________ #1 2012 NMCA/LSX Challenge Series 2012 2SS 45th A6 Thanks to our Sponsors: coldairinductions.com (Cold Air Inductions) loughengines.com (Mike Lough Race Engines) granatellimotorsports.com (Granatelli Motorsports)

06-22-2012, 06:40 AM	#15
se7en Drives: 87 Pinto on 32's Join Date: Oct 2009 Location: Southern Illinois Posts: 1,494	Very happy for you Mike and your build. Ive read a lot about your racing and i know how much work you have in this thing. Cant wait to see what it will do with the new heads Are you running a 4 stage nitrous system?

06-22-2012, 11:53 AM	#18
Pro Stock John Drives: 2010 SS / 1951 Mercury Join Date: May 2009 Location: Chicago Posts: 2,248	Always enjoy hanging out with you at the races. I owe you a pack of smokes and a power drink sir, let me pick up dinner one night in Bowling Green! __________________ 2010 Camaro SS \| LT's Cats UD CAI Tune DR \|12.37@112 1951 Mercury \| Chopped \| SBC 1998 Formula \| 348 TH400 88mm \| 9.40@145 sold 2000 Camaro \| 348 TH400 150 NOS \| 10.0@134 sold ~All installs and tuning by Speed Inc.

06-23-2012, 06:50 AM	#21
Rockit_z28 Team 1BAD DOG Drives: 2010 IOM 2SS/RS Auto Join Date: Apr 2011 Location: Indian Land, SC Posts: 689 View My Garage	Famtastic car and better yet an incredible build. If you have not read the story, I suggest doing so. Mike - You scared the p* out of my son at the CHP Nationals when you fired that beast up. __________________ As of March 2013, the car is currently under a rebuild courtesy of: Heintz Racing (Performance, Parts and Tuning) S.L. Customs (Paint and Body) Bagshaw Fabrication (Roll Cage) FSP (Parts) 2010 2SS/RS L99 IOM http://www.youtube.com/user/1baddogracing BMR Suspension, DSS 9" 3.70 Gear, 1 7/8 Kooks Headers NMCA/LSX Car# 805**

06-23-2012, 08:00 AM	#23
Zman12 Drives: 2010 Camaro 2SS Join Date: May 2011 Location: Gardner,Ks Posts: 491	Great article! __________________ Whipple,custom cam,CAI,Kooks,Pedders and PFADT 626RWHP 549TQ ..