12-20-2016, 11:42 AM | #1 |
Drives: 2012, SS Camaro Join Date: Nov 2016
Location: Shelby Twp. MI
Posts: 17
|
Coil pack relocation
I am looking at the pro form coil pack bracket.
I have a turbo set up and i need to move them from the heat. They are made for a larger valve cover. But I have stock fuel rail, It looks like it will be in the way? Help anyone |
12-20-2016, 04:53 PM | #2 |
|
Where do you want to put the coils? I put mine on the frame rails and made my own brackets. very easy to make brackets..just not sure if your going frame rail or fire wall..
__________________
Car mods: never enough!
|
12-21-2016, 09:06 AM | #3 |
Drives: 2011 2SS/RS (M6) 427 Twin Turbo Join Date: May 2008
Location: NJ
Posts: 1,090
|
I have the proform valve covers, i relocated my coil packs down low and used some billet fuel rails.
__________________
2011 Camaro 2SS/RS ERL 427 M6 TT -AGP Twin Turbo 55/57 .83ar | ERL 427ci | Squash Fuel System | Stainless Works Chambered 3" | Mcleod RXT | Factory Hurst Short Throw | Black Forgestar F14s | CTS V 6 Piston Brembo | VIS AMS Carbon Fiber Hood | Anvil Carbon Fiber Spoiler |
12-21-2016, 11:40 AM | #4 |
Drives: 2013 Camaro Convertible RS LT2 Join Date: Nov 2016
Location: New Hampshire
Posts: 7
|
mbrusco103 I like the way that looks!
|
12-24-2016, 10:19 AM | #5 |
Drives: 2012, SS Camaro Join Date: Nov 2016
Location: Shelby Twp. MI
Posts: 17
|
My problem is I installed Huron speed turbo, so the hot side/ drivers side. I cant put the coils on the frame rail
|
|
|
|
|