12-04-2014, 06:59 PM | #1 |
Drives: 2011 CAMARO 2SS/RS Join Date: Feb 2013
Location: SAN DIEGO & TEXAS
Posts: 345
|
G6X3 Cam verification
My Mechanic sent this picture and said i have the G6X3 camshaft but when i plugged in the number that's engraved on the bottom side (2870H) of the cam it seems it doesn't correspond with the G6 series cams. i just what to verify if the G6X3 is the cam i have in the car right now. Thanks for the help everyone
|
12-05-2014, 02:36 PM | #2 |
Drives: 03 Cobra Join Date: Jun 2009
Location: Plano TX
Posts: 130
|
The only numbers on the back of our cams are the PN....
Depending on when the cam was made, the new ones are laser etched into the cam. Where did you get it, I might be able to track it. But yes...that would appear at first look to be one of ours. |
12-06-2014, 08:16 PM | #3 | |
Drives: 2011 CAMARO 2SS/RS Join Date: Feb 2013
Location: SAN DIEGO & TEXAS
Posts: 345
|
Quote:
i didnt get it, i bought my car used with 9k miles on it and it was already installed and i never knew what type of cam i had till know which the car is at 40k miles. the mechanic sent me that picture and said thats the cam that was in the car to order the same one and i just wanted to make sure that was the right G6X3 cuz i dont think a cam company will engrave "G6X3" that way. But if it is LG than my mind will be at ease. |
|
|
|
Tags |
cam, engine, g6x3, internal |
|
|