06-23-2010, 09:14 AM | #1 |
Drives: 2017 ZL1 Join Date: Dec 2009
Location: NYC
Posts: 1,165
|
BA AMP
Does anyone know the spec of the factory amp? Power/bd, peak,rms watts.
Thanks
__________________
Elite Design Concepts NY5THGEN2017 ZL1 Garnet Red/M6/// IG @Crazl1
|
06-23-2010, 10:31 AM | #2 |
Retarded One-Legged Owl
Drives: 2010 Black Camaro 2SS Join Date: Oct 2008
Location: San Antonio, TX
Posts: 9,745
|
Well, it's a 245-watt "9-speaker" system. So, I imagine it's something goofy considering they count every seperate cone in the stereo as a "speaker"... so...
Edit: My guess: 25 watt Center channel 25 watt A-pillar tweeters (2 of them) 25 watt Door 6.5" speakers (2 of them) 35 watt Rear Deck 6x9 speakers (2 of them) 25 watt Rear Deck mid-range (second cone in the 6x9 speakers) But, like I said, this is a complete guess. I don't that anyone has bothered to check what each channel is rated for...
__________________
|
06-24-2010, 10:32 PM | #3 |
Drives: 2011 CGM 2LT w/RS Join Date: Jun 2010
Location: Miami, FL
Posts: 354
|
has anyone figured this out for sure yet?
|
08-10-2010, 09:46 AM | #4 |
Drives: 2011 CGM 2LT w/RS Join Date: Jun 2010
Location: Miami, FL
Posts: 354
|
seriously? nobody has got the specs on the amp yet? come on people...
|
08-10-2010, 11:03 AM | #5 |
Dont H8 Me Cuz U Aint Me
Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,910
|
honestly mine went in the trash the first week I had the car I bet thats the way with most that have upgraded.. most dont check out the factory power just replace it
__________________
|
08-10-2010, 11:06 AM | #6 |
Drives: 2011 CGM 2LT w/RS Join Date: Jun 2010
Location: Miami, FL
Posts: 354
|
Well i'd like to know what I'm replacing. If I was gonna upgrade i'd understand it not mattering but I am only planning on doing a few key components. I would really like to know the stock ba amp specs...
|
08-10-2010, 11:13 AM | #7 |
Drives: 2010 Camaro 1LT Black/Black Join Date: Apr 2010
Location: Groveland, Florida
Posts: 19
|
It's an 8 channel Visteon amp. Visteon went belly up about 2 months ago LOL. It has an internal X-over. So that's 30.62 watts x 8 channel's. Max. Your not going to be happy till you upgrade. I took 6 channels from the amp and ran them to a AudioControl LC6i six channel line output converter. From there to a Alpine PDX-5 five channel amp. Two sets of Alpine component speakers and One subwoofer. So in the end what I have is 106 watts x 4, plus 408 watts x 1. 832 RMS watts compaired to Visteon's 122 RMS watts. Ballpark.
|
08-10-2010, 01:52 PM | #8 |
Drives: 2010 Camaro Join Date: Aug 2010
Location: Arizona
Posts: 12
|
norty - sounds like a great system, good work. Why did you prefer to keep the factory amp in the system (as opposed to using the 4 channels out of the deck, before the amp)?
thanks |
08-10-2010, 02:43 PM | #9 |
Drives: 2010 Camaro 1LT Black/Black Join Date: Apr 2010
Location: Groveland, Florida
Posts: 19
|
Because I didn't understand color codes of wires before Amp, just after.
|
11-12-2010, 05:30 PM | #10 |
How would I wire up a Kenwood 8452 to replace the stock amp and would it work with the stock head unit?
The Kenwood is 70 watts x 4 @ 4ohms or 100 watts x 4 @ 2 ohms.
__________________
2022 Black ZL1
RotoFab CAI, AWE Touring Edition Cat Back Exhaust. 665 Crank hp. est. and 660 Crank ft. lbs. est. Never been Dynoed Last edited by FRANK121; 11-12-2010 at 09:18 PM. |
|
11-17-2010, 09:26 PM | #11 |
They call me captain slow
Drives: 2010 camaro lt Join Date: Jun 2010
Location: Springfield Illinois
Posts: 1,241
|
Well there goes our factory replacement amps, since visteon went belly up
|
11-18-2010, 07:07 AM | #12 | |
Drives: 2017 ZL1 Join Date: Dec 2009
Location: NYC
Posts: 1,165
|
Quote:
That's ok because the factory amp sucks anyways. |
|
11-18-2010, 08:51 AM | #13 |
They call me captain slow
Drives: 2010 camaro lt Join Date: Jun 2010
Location: Springfield Illinois
Posts: 1,241
|
Yeah but unlike some of u I don't plan on tearing my car interior out, for a stereo system the ba sounds great to me as is
|
11-18-2010, 10:14 AM | #14 |
After finally getting my BA 12" Sub installed I think the stock system sounds GREAT!
I have my settings set to: Treble +1 Midrange 0 Bass +5 Crank it up to 30-35 and it rocks with no distortion! The additional sub made a big difference
__________________
2022 Black ZL1
RotoFab CAI, AWE Touring Edition Cat Back Exhaust. 665 Crank hp. est. and 660 Crank ft. lbs. est. Never been Dynoed |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amp install - how to (w/pics) | ASTEDA | Camaro DIY & HOW-TO instructions & discussions | 31 | 10-15-2019 11:14 PM |
Amp install- how to (w/pics) | ASTEDA | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 63 | 02-27-2017 01:27 PM |
Stereo GUIDE ALL READ | WildBeast15 | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 29 | 09-11-2010 01:14 AM |
jl stealthbox install | piddlewink | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 15 | 09-01-2010 06:10 PM |