My Maggie install......... - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PQ · 01-02-2011, 09:24 PM

Quote:

Originally Posted by GJG

....shouldn't hurt a thing?

I don't know. I'm gonna continue anyway. I quit smoking 6 months ago so I don't anticipate any fires. lol

Quote:

Originally Posted by Huggerorange73

Done yet?

Just getting going.

GJG · 01-02-2011, 09:32 PM

it'll be fine....unless your gonna work all nite.....then u may need to get it off so you can pull the intake....lol

PQ · 01-02-2011, 09:40 PM

Quote:

Originally Posted by GJG

it'll be fine....unless your gonna work all nite.....then u may need to get it off so you can pull the intake....lol

I was going to.

GJG · 01-02-2011, 09:51 PM

try to get the end on the driver side off....it'll be easier without the tool.....i just went out and looked inside the fitting on the old stock intake....there are 4 tabs at 12-3-6-9 o'clock that have to be depressed to pull it off.....

if you get it off then you can leave it attached at passenger side and lay it over the fuse box...

PQ · 01-02-2011, 09:53 PM

Quote:

Originally Posted by GJG

try to get the end on the driver side off....it'll be easier without the tool.....i just went out and looked inside the fitting on the old stock intake....there are 4 tabs at 12-3-6-9 o'clock that have to be depressed to pull it off.....

if you get it off then you can leave it attached at passenger side and lay it over the fuse box...

Let me try.

*Mr. Wyndham* · 01-02-2011, 09:54 PM

This is pretty cool, if I do say so...a live-action supercharger install.

"Try this"

"Okay, be right back."

GJG · 01-02-2011, 10:18 PM

hope PQ's not on fire doing the stop, drop and roll.....

Huggerorange73 · 01-02-2011, 10:19 PM

Quote:

Originally Posted by PQ

I don't know. I'm gonna continue anyway. I quit smoking 6 months ago so I don't anticipate any fires. lol

Just getting going.

If you lived close by, I'd gladly slap that sucker on for ya!

PQ · 01-02-2011, 10:32 PM

Ok. Got the fuel line. I had to make a fuel line tool.

I cut up a plastic container and shaped it up. Wrapped it around the line and shoved it up and it released the line.

Name: 100_1945.JPG
Views: 768
Size: 221.3 KB

Name: 100_1945.JPG
Views: 768
Size: 221.3 KB

Quote:

Originally Posted by Dragoneye

This is pretty cool, if I do say so...a live-action supercharger install.

"Try this"

"Okay, be right back."

C5 rocks.

Quote:

Originally Posted by GJG

hope PQ's not on fire doing the stop, drop and roll.....

Quote:

Originally Posted by Huggerorange73

If you lived close by, I'd gladly slap that sucker on for ya!

And I'd let you. lol

GJG · 01-02-2011, 10:44 PM

[QUOTE=PQ;2691317]Ok. Got the fuel line. I had to make a fuel line tool.

I cut up a plastic container and shaped it up. Wrapped it around the line and shoved it up and it released the line.

Attachment 195861

necessity....the mother of all inventions!!!!

zebra · 01-02-2011, 10:52 PM

well if you need any more help, you have my number & i ain't doing anything tomorrow

Silver2SSRS6spd · 01-02-2011, 10:59 PM

Quote:

Originally Posted by PQ

Ok. Got the fuel line. I had to make a fuel line tool.

I cut up a plastic container and shaped it up. Wrapped it around the line and shoved it up and it released the line.

Attachment 195861

C5 rocks.

And I'd let you. lol

After seeing that, I think you are going to be alright, I just want to know how you are going to check the pool chemistry now.

Kilo-9 · 01-02-2011, 11:39 PM

Quote:

Originally Posted by PQ

Ok. Got the fuel line. I had to make a fuel line tool.

I cut up a plastic container and shaped it up. Wrapped it around the line and shoved it up and it released the line.

Nicely done...MacGyver would be proud!

PQ · 01-03-2011, 12:19 AM

Well, calling it quits tonight. Only because I don't want to run the impact wrench this late. And I wanna make sure all the gasoline is dried up before I possibly get the torch out. Plus, I don't feel like straining on that freaking bolt tonight.

Quote:

Originally Posted by zebra

well if you need any more help, you have my number & i ain't doing anything tomorrow

I'll call you tomorrow morning. If I get up at a decent time. We have to bowl tomorrow at 6pm so I am gonna have to cut it short. I'd hate for you to drive all the way here for only a few hours. Up to you. I'll try to call early.

Quote:

Originally Posted by Silver2SSRS6spd

After seeing that, I think you are going to be alright, I just want to know how you are going to check the pool chemistry now.

It was the thickest plastic I could find. lol

Bonnie said no on opening a can of food for the tin.

Quote:

Originally Posted by Kilo-9

Nicely done...MacGyver would be proud!

I spent 4 years in the military. I had no choice. haha

01-02-2011, 09:32 PM	#58
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871 View My Garage	it'll be fine....unless your gonna work all nite.....then u may need to get it off so you can pull the intake....lol __________________ Sleep well America.....my MARINE has your back......

01-02-2011, 09:51 PM	#60
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871 View My Garage	try to get the end on the driver side off....it'll be easier without the tool.....i just went out and looked inside the fitting on the old stock intake....there are 4 tabs at 12-3-6-9 o'clock that have to be depressed to pull it off..... if you get it off then you can leave it attached at passenger side and lay it over the fuse box... __________________ Sleep well America.....my MARINE has your back......

01-02-2011, 09:54 PM	#62
Mr. Wyndham I used to be Dragoneye... Drives: 2018 ZL1 1LE Join Date: Jan 2007 Location: Buffalo, NY Posts: 31,876 View My Garage	This is pretty cool, if I do say so...a live-action supercharger install. "Try this" "Okay, be right back." __________________ *"Keep the faith."* - Fbodfather

01-02-2011, 10:18 PM	#63
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871 View My Garage	hope PQ's not on fire doing the stop, drop and roll..... __________________ Sleep well America.....my MARINE has your back......

01-02-2011, 10:44 PM	#66
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871 View My Garage	[QUOTE=PQ;2691317]Ok. Got the fuel line. I had to make a fuel line tool. I cut up a plastic container and shaped it up. Wrapped it around the line and shoved it up and it released the line. Attachment 195861 necessity....the mother of all inventions!!!! __________________ Sleep well America.....my MARINE has your back......

01-02-2011, 10:52 PM	#67
zebra just can't seem to leave Drives: your mom wild!! Join Date: Oct 2008 Location: cold & windy Posts: 10,625 View My Garage	well if you need any more help, you have my number & i ain't doing anything tomorrow __________________ Eve ('00 FRC): hot-air intake Rowan ('09 H3): 5spd mom-mobile Penny ('99 Sierra): 5.3 / HD 5spd... gone but not forgotten Samson ('18 HD): compounded 408

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where to get engine cover modified after a Maggie install?	1meanss	Cosmetics and Lighting Modification Discussions	5	03-05-2011 09:00 PM
Another Maggie install ....	Luvpilot	Forced Induction - V8	9	06-20-2010 09:00 PM
maggie install, hose routing suggestions please	n2oSS	Forced Induction - V8	6	05-31-2010 03:59 PM
DIY : Install catback on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	3	08-09-2009 04:36 PM