09-18-2013, 06:43 AM | #15 |
Drives: 1968 Camaro SS & 2015 GMC Sierra De Join Date: Nov 2012
Location: Camp Lejeune, NC
Posts: 94
|
I got another v-band from a local tuner shop, you can find them everywhere on the internet. i just wouldn't go cheap with them. I am not running any material between header and cat and haven't had any leaks so far
__________________
Whipple SC, Lingenfelter Heads & Cam, ACT Twin Disc Clutch, Rotofab CAI, JBA 1 7/8" Long Tube Headers & 3" Exhaust, Livernois Motorsports Fuel Pump, DSS 1400Hp Axles
RWHP 660 RWTQ 618 SOLD |
09-18-2013, 10:36 AM | #16 |
Drives: Camaro SS Join Date: Aug 2013
Location: United State
Posts: 21
|
Hit or miss on fit compared to major brands from what Ive seen. V-bands are a nice feature though
|
09-18-2013, 03:40 PM | #17 |
Account Suspended
Drives: White 2010 RS/SS Join Date: Dec 2009
Location: San Diego
Posts: 672
|
On this forum I have seen issues with fit with other brands so it's not just one brand or another that has an issue now and then. I have never read of any JBA buyer having to dimple a tube like many other brands with the steering shaft.
|
09-18-2013, 05:24 PM | #18 |
Drives: 2010 2ss/rs & 2014 Stingray Join Date: Aug 2013
Location: Phoenix
Posts: 124
|
We just got one in with an exhaust leak. The owner says its the 3rd time the headers have had an exhaust leak. We will be looking at it in the morning. We don't sell them and have heard of a few issues with them. These are 3 years old according to the owner, 37k on them. Quality looks mediocre from a visual stand point.
Will post up what we find. |
09-18-2013, 05:28 PM | #19 |
Drives: 2011 2SS/RS Join Date: Jun 2013
Location: Midwest
Posts: 335
|
I didn't have to dimple a tube on mine it dimpled itself lol you can see in this pic where it looks like the second tube back is touching, it dimpled itself right there 😜 it's super close on the other side to the engine mount bracket but not quite touching
|
09-18-2013, 09:44 PM | #20 |
Banned
Drives: 2010 2SS/RS Join Date: Feb 2012
Location: DA BOTTOM
Posts: 649
|
You get what you pay for. Kooks all the way. Way go cheap on parts
|
09-19-2013, 12:51 AM | #21 |
Drives: 2011 2SS/RS Join Date: Jun 2013
Location: Midwest
Posts: 335
|
Yep and I only paid $150 so I'm ok with a little dimple 👍
|
09-19-2013, 01:03 PM | #22 |
Drives: 2010 2ss/rs & 2014 Stingray Join Date: Aug 2013
Location: Phoenix
Posts: 124
|
We found the leak, left header, flange is warped and there is a hairline crack along the weld on the flange to head side. Looking at the unit it does seem to be a lower quality unit.
|
09-19-2013, 02:37 PM | #23 |
Drives: 2009 Corvette Z06 Join Date: Aug 2009
Location: Marietta, GA
Posts: 2,141
|
I don't have experience with them. If you asked about ARH, KOOKS or PFadt, I'd tell you they are great ;-)
|
|
|
|
|