Pyr0b0y's SS Build Thread [COTW 5/23/11] - Page 21 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

WadeWilson · 06-04-2011, 10:23 PM

Silver2SSRS6spd · 06-04-2011, 11:11 PM

Come out to Marina if you want to see Josh and I rear it up in the auto-x. Registration is a 8am at the marina airport. Racing starts at 9 aNd it's free to watch.

miguelfranco · 06-12-2011, 02:55 PM

Quote:

Originally Posted by pyr0b0y

got around to rewiring my blinker lights. I used a 2 tone bulb and tapped into my halo wiring so i have white led's as running lights with halos. You don't really notice it in this pic but the halos are just a slightly different tint. I'm considering swapping them with higher output CCFL rings, but not too excitied about baking my headlights in the oven!

Notice the Mustang in the back trying to be in the photo... awwwhhhh poor little pony...

Silver2SSRS6spd · 06-12-2011, 05:57 PM

Which coil overs did you get? I'm going to pull the trigger this week and am looking for suggestions and pricing.

LA_Ghost · 06-13-2011, 12:27 AM

Did you paint your stock rims or were those the midnight silver rims?

pyr0b0y · 06-13-2011, 06:10 PM

Quote:

Originally Posted by Silver2SSRS6spd

Which coil overs did you get? I'm going to pull the trigger this week and am looking for suggestions and pricing.

The BC 1-way adjustable ones Blu808 has on special:

http://www.camaro5.com/forums/showthread.php?t=148559

They're really well built and the price cant be beat!

pyr0b0y · 06-13-2011, 06:10 PM

Quote:

Originally Posted by LA_Ghost

Did you paint your stock rims or were those the midnight silver rims?

I'm actually running 20" TSW Croft Rims in Gun Metal Grey.

pyr0b0y · 06-22-2011, 01:49 PM

pics of my roll cage by Blu808. harnesses are fire extinguisher are installed, but still gotta take pics of that; cars really starting to come along!

pyr0b0y · 06-27-2011, 10:46 AM

Got my Heritage Grill and T3 ports (semi) installed this weekend along with my replacement ACE Steering Wheel. Finally got some more pics of the roll cage and harness setup.

I'm still debating on what I want to do as far as lighting with my T3 ports.

Subframe and Diff Bushings are getting ordered from Pfadt this week.

pyr0b0y · 07-05-2011, 10:36 AM

Carbon Fiber mirrors are being shipped out to me. Just bought a carbon fiber rear diffuser too. 1400hp axels are on the way and should be here at the end of the week, along with my bushings.

pyr0b0y · 07-05-2011, 12:59 PM

Engine finally got ordered this past week; here are the engine specs:

LS3 418 6.8L

Callies Compstar 4.00” stroke 2.100” journal crank 58x
Callies Compstar rods 6.125” / 2.100”
Mahle 1.105x4.070 -25 dish pistons
Mast med bore CNC 12* heads LS3 flow @ .600 365/254
2.165” steel intake valve
Inconel exhaust valve 1.600”
Mast dual valve springs

4.070" Bore x 4.000" Stroke
Torque Plate Honed Cylinders
True Surface Decked
Align Honed
Block Coolant and Oil Plugs
Dura Bond Cam Bearings
Callies Forged Crankshaft
Callies Forged H-Beam Rods
Mahle Forged Pistons
ARP Main Studs

WiccaJew · 07-05-2011, 06:22 PM

Any plans with the supercharger ? Selling it? I might be interested

Anyway the car is looking sick and I miss you all

pyr0b0y · 07-05-2011, 06:24 PM

Quote:

Originally Posted by WiccaJew

Any plans with the supercharger ? Selling it?

trying to sell the supercharger and engine, not sure if i can get anything for the transmission....gunna post it after i get the engine and (hopefully) twin turbos in the shop

WiccaJew · 07-05-2011, 08:28 PM

Quote:

Originally Posted by pyr0b0y

trying to sell the supercharger and engine, not sure if i can get anything for the transmission....gunna post it after i get the engine and (hopefully) twin turbos in the shop

Nice just keep me updated

View Poll Results: T Tops or Carbon Fiber?
T Tops	14	73.68%
Carbon Fiber Conversion (Fenders, doors, etc)	5	26.32%
Voters: 19. You may not vote on this poll

06-04-2011, 11:11 PM	#282
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	Come out to Marina if you want to see Josh and I rear it up in the auto-x. Registration is a 8am at the marina airport. Racing starts at 9 aNd it's free to watch. __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

06-12-2011, 05:57 PM	#284
Silver2SSRS6spd Prefer to be blown! Drives: 2010 Silver/Black 2SS/RS Manual Join Date: Mar 2010 Location: Nor-Cal Posts: 2,677 View My Garage	Which coil overs did you get? I'm going to pull the trigger this week and am looking for suggestions and pricing. __________________ MagnaCharger TVS-2300 550rwhp 540 rwt and a radical suspension under the car.

06-22-2011, 01:49 PM	#288
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	pics of my roll cage by Blu808. harnesses are fire extinguisher are installed, but still gotta take pics of that; cars really starting to come along! Attached Images __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

06-27-2011, 10:46 AM	#289
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Got my Heritage Grill and T3 ports (semi) installed this weekend along with my replacement ACE Steering Wheel. Finally got some more pics of the roll cage and harness setup. I'm still debating on what I want to do as far as lighting with my T3 ports. Subframe and Diff Bushings are getting ordered from Pfadt this week. Attached Images __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

06-04-2011, 10:23 PM	#281
WadeWilson How U Doin? Drives: 2014 CTS-V Coupe Join Date: Oct 2008 Location: Californication Posts: 24,156 View My Garage

06-13-2011, 12:27 AM	#285
LA_Ghost Drives: 2010 Camaro RS Join Date: Jun 2011 Location: Louisiana Posts: 61	Did you paint your stock rims or were those the midnight silver rims?

07-05-2011, 10:36 AM	#290
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Carbon Fiber mirrors are being shipped out to me. Just bought a carbon fiber rear diffuser too. 1400hp axels are on the way and should be here at the end of the week, along with my bushings. __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims

07-05-2011, 12:59 PM	#291
pyr0b0y need....more....hp Drives: The Neighbor Hater Join Date: Dec 2010 Location: San Mateo, CA Posts: 4,091	Engine finally got ordered this past week; here are the engine specs: LS3 418 6.8L Callies Compstar 4.00” stroke 2.100” journal crank 58x Callies Compstar rods 6.125” / 2.100” Mahle 1.105x4.070 -25 dish pistons Mast med bore CNC 12* heads LS3 flow @ .600 365/254 2.165” steel intake valve Inconel exhaust valve 1.600” Mast dual valve springs 4.070" Bore x 4.000" Stroke Torque Plate Honed Cylinders True Surface Decked Align Honed Block Coolant and Oil Plugs Dura Bond Cam Bearings Callies Forged Crankshaft Callies Forged H-Beam Rods Mahle Forged Pistons ARP Main Studs __________________ BUILD THREAD BUILT AND MAINTAINED BY BLU808 Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims Last edited by pyr0b0y; 11-16-2012 at 12:29 PM.

07-05-2011, 06:22 PM	#292
WiccaJew Drives: Black & Blue 1SS Join Date: Apr 2010 Location: Back In The Desert Posts: 1,257 View My Garage	Any plans with the supercharger ? Selling it? I might be interested Anyway the car is looking sick and I miss you all __________________ ARH 1 7/8 headers, ARH 3" XPIPE, MBRP 3" Catback

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3rd Gen Camaro Street Stock build thread (dialup beware)	zlathim	3rd Generation Camaros	9	12-06-2018 10:30 AM
Tom Henry Racing THR22 2010/LS3/IBM/Supercharged SS Camaro [COTW 10/29/12]	GTAHVIT	Member Car Journals	5217	06-27-2016 08:14 AM
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-04-2010 11:49 PM
Anyone in St. Louis want a black SS March build Camaro	Sean_W	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	03-08-2009 01:31 PM