09-16-2011, 04:01 PM | #1 |
Bowtie, FOR LIFE!!!!
Drives: Camaro 2SS/RS SW/IOM Interrior Join Date: Jul 2009
Location: Where ever Uncle Sam Places me...
Posts: 512
|
Flowmaster Muffler question.
I am about to buy some FM 44s i (like the tone and sound) but a salesperson at auto zone told my wife if i have a gfx kit that it matters??? Is this true? I can understand a complete CB but just mufflers? heccck no..just doesnt make sense.
__________________
__________________
2SS/RS Summit White M6
Current: 2011 SW 2SS/RS M6 Fast!!! 70 Chevelle SS (sold) Still kicking myself! 2010 CGM SS/RS A6 (RIP) one pissed SS right there!!!! |
09-16-2011, 04:04 PM | #2 |
Drives: 2010 camaro 2SS LS3 Join Date: Aug 2011
Location: Denver
Posts: 1,334
|
can you rephrase, im confused. ground effects kit doesn't affect what muffler to put on. just tip placement
|
09-16-2011, 04:31 PM | #3 |
Bowtie, FOR LIFE!!!!
Drives: Camaro 2SS/RS SW/IOM Interrior Join Date: Jul 2009
Location: Where ever Uncle Sam Places me...
Posts: 512
|
does aftermarket mufflers effect ground effects kit...you answered it.. thanks!
__________________
2SS/RS Summit White M6
Current: 2011 SW 2SS/RS M6 Fast!!! 70 Chevelle SS (sold) Still kicking myself! 2010 CGM SS/RS A6 (RIP) one pissed SS right there!!!! |
09-16-2011, 04:34 PM | #4 |
Drives: 2010 silver SS Join Date: Apr 2011
Location: Midland TX
Posts: 1,063
|
Nope... Won't affect it at all... Just need the correct tips
__________________
2012 Corvette Grandsport... TSP headers, Borla S-Type, BTR Stage 3 N/A cam, Halltech Super Bee MF108
|
09-16-2011, 05:08 PM | #5 |
Bowtie, FOR LIFE!!!!
Drives: Camaro 2SS/RS SW/IOM Interrior Join Date: Jul 2009
Location: Where ever Uncle Sam Places me...
Posts: 512
|
thanks..which inlet and outlet do i buy? center/offset correct? 2 and a 1/2 right? i have stock pipes
__________________
2SS/RS Summit White M6
Current: 2011 SW 2SS/RS M6 Fast!!! 70 Chevelle SS (sold) Still kicking myself! 2010 CGM SS/RS A6 (RIP) one pissed SS right there!!!! |
09-16-2011, 06:21 PM | #6 |
Banned
Drives: 2011 2SS/RS Silver Join Date: Jul 2011
Location: Morristown NJ
Posts: 103
|
The only difference between the gfx kit vs regular is what kind of tips they give you. FM is a good choice, I love my FM AT axle back!
|
09-16-2011, 06:39 PM | #7 |
Drives: 2010 silver SS Join Date: Apr 2011
Location: Midland TX
Posts: 1,063
|
you got it... and you might even look into the square tips... got to see them in person on BACHs car and they are sexy.
__________________
2012 Corvette Grandsport... TSP headers, Borla S-Type, BTR Stage 3 N/A cam, Halltech Super Bee MF108
|
09-17-2011, 12:52 AM | #8 | |
Bowtie, FOR LIFE!!!!
Drives: Camaro 2SS/RS SW/IOM Interrior Join Date: Jul 2009
Location: Where ever Uncle Sam Places me...
Posts: 512
|
Quote:
ok thanks. so to be sure its the 3rd one from the top right? the 3rd one and 4th looks the same in/out is the same in size maybe its something i dont know. thanks for the help
__________________
2SS/RS Summit White M6
Current: 2011 SW 2SS/RS M6 Fast!!! 70 Chevelle SS (sold) Still kicking myself! 2010 CGM SS/RS A6 (RIP) one pissed SS right there!!!! |
|
09-17-2011, 11:48 AM | #9 |
Search Ninja
Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009
Location: Central Ark
Posts: 7,183
|
You might search for a axleback system that is premade for your car. Typically, they aren't a whole lot more than just the mufflers but come with all the pipes and hangars that are meant for your car. Makes fitment a LOT easier and cleaner looking. It would also save you $$ on the install since the muffler shop will just have labor to charge for. That means no pipes, bending, or anything. Just cut, install, tighten up the clamps. Not sure if they have the tips for the GFX but it wouldn't be anything to cut your OEM ones off and reinstall.
__________________
2010 Black 2SS/RS A6
Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train. |
09-17-2011, 11:58 PM | #10 |
just get flowmaster cat back for ground xfects. i did simple install.
|
|
09-21-2011, 12:04 PM | #11 | |
Drives: 1972 Camaro Z28 Join Date: Aug 2009
Location: Santa Clarita
Posts: 262
|
Quote:
Deeboe – What kind of sound are you looking for? If you’re going to install a set of muffler into your existing pipes you’ll probably need to have a muffler shop make a couple of bends for you. If you want to install a system that’s going to fit right out of the box and install with some simple hand tools at home, you should look at our Axle-Back kits. They will save you money on labor of installation and you’ll get a 409S Stainless Steel system with a Lifetime Warranty. If you want the same warranty when installing mufflers into your existing pipes, make sure to purchase the Flowmaster mufflers listed as 409S Stainless Steel. |
|
09-21-2011, 03:33 PM | #12 |
Drives: 2010 2SS Join Date: Jan 2011
Location: Salisbury, NC
Posts: 149
|
Why does the #817495 kit not fit the factory GFX?
|
09-21-2011, 05:00 PM | #13 |
Bowtie, FOR LIFE!!!!
Drives: Camaro 2SS/RS SW/IOM Interrior Join Date: Jul 2009
Location: Where ever Uncle Sam Places me...
Posts: 512
|
[QUOTE=flowmann;3782704]Deeboe – What kind of sound are you looking for? If you’re going to install a set of muffler into your existing pipes you’ll probably need to have a muffler shop make a couple of bends for you. If you want to install a system that’s going to fit right out of the box and install with some simple hand tools at home, you should look at our Axle-Back kits. They will save you money on labor of installation and you’ll get a 409S Stainless Steel
i am looking, for a deep strong sound.....
__________________
2SS/RS Summit White M6
Current: 2011 SW 2SS/RS M6 Fast!!! 70 Chevelle SS (sold) Still kicking myself! 2010 CGM SS/RS A6 (RIP) one pissed SS right there!!!! |
09-22-2011, 03:46 AM | #14 |
Bowtie, FOR LIFE!!!!
Drives: Camaro 2SS/RS SW/IOM Interrior Join Date: Jul 2009
Location: Where ever Uncle Sam Places me...
Posts: 512
|
what axlebacks does FM have work with GM GFX kit?
__________________
2SS/RS Summit White M6
Current: 2011 SW 2SS/RS M6 Fast!!! 70 Chevelle SS (sold) Still kicking myself! 2010 CGM SS/RS A6 (RIP) one pissed SS right there!!!! |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question...Is a muffler delete legal? | PnCRedJwl2SS | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 26 | 07-06-2010 08:47 PM |
Flowmaster and muffler weep holes | Dynabyte | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 9 | 02-15-2010 03:14 PM |
Muffler Delete Question | sfgiantsfan9 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 15 | 01-23-2010 02:12 PM |
LS3 Muffler packing insulation question? | faninc | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 17 | 12-02-2009 08:37 PM |
question about the muffler delete | SamSS | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 12 | 11-27-2009 11:22 PM |