Want to trade these custom AR15 rifles for a supercharger - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Nutro · 11-18-2013, 08:16 PM

Or a turbo setup. Hell I might go for other high end stuff like heads, cam, intake etc etc but REALLY prefer a supercharger.

Details:

#1:

SPR type build: Upper: Top in the picture

Seekins Precision billet upper
M4 Cut receivers
Headspaced
18" Douglas precision medium contour barrel. 416R stainless polygonal rifling and 1:8 twist with rifle length gas system.
Rare Vortex stainless flash hider
Low profile .750 Diameter gas block
BCM Mod3 Gunfighter charging handle
WMD Tactical Nickle Boron Bolt carrier group (FA profile) with MPI tested bolt
PRI (Precision Reflex) 15" Carbon Fiber handguard with top, bottom and side rails (This along was $400)
Mission First pistol grip with storage plug

Lower receiver:

Seekins Precision Billet ambi lower
Seekins enhanced bolt catch
Seekins Magazine release
Magpul PRS Precision fully adjustable stock with rifle length buffer and buffer spring
KNS Precision anti-rotation trigger/Hammer pins
BAttle Arms BAD-ASS Ambi safety setup
Spike's Tactical Nickle boron hammer/trigger control group with JP yellow and red springs for a clean 4# pull

This one is one stupid soft and accurate shooter. This rifle was just completed and has had exactly 14 rounds of Hornady Match 77gr ammo through it.

************************************************** ****************

#2

The Carbine setup: Bottom in the picture

Upper receiver:

Seekins Precision billet upper
M4 Cut receiver
BCM Mod3 Gunfighter charging handle
Rainier Arms Match 16" Stainless barrel. This is 416R stainless and is Mid-length gas system
Rainier arms RMC Mini Muzzle comp
BCM Mod3 Gunfighter charging handle
Noveske NSR 13.5" Hand guard
Low profile .750 Diameter gas block
WMD tactical Nickle Boron bolt carrier group (FA profile) with MPI tested bolt

Lowe receiver:

Seekins Precision billet lower Ambi receiver
Seekins enhanced bolt catch
Seekins Magazine release
KNS Precision anti-rotation trigger/Hammer pins
BAttle Arms BAD-ASS Ambi safety setup
WMD Nickle boron trigger/hammer group with JP Yellow and red springs for a clean 5# pull (I am polishing it now but it will be installed soon)
Magpul MIAD grip in FDE
Milspec buffer tube with Heavy buffer and enhanced buffer spring
B5 Systems Enhanced B5 stock in FDE

This rifle is a sweet shooter as well and has had exactly 44 rounds of Hornady 77gr match roundss through it.

Both are New rifles and built by a professional and done CORRECTLY. I will absolutely guarantee these are BUILT correctly and will outshoot most people.

I can also work a deal on one of the rifles and the MEGA billet lower receiver shown.

11-18-2013, 08:16 PM	#1
Nutro Drives: 2011 2SS Synergy Green Join Date: Nov 2011 Location: Austin, Texas Posts: 3,670	Want to trade these custom AR15 rifles for a supercharger Or a turbo setup. Hell I might go for other high end stuff like heads, cam, intake etc etc but REALLY prefer a supercharger. Details: #1: SPR type build: Upper: Top in the picture Seekins Precision billet upper M4 Cut receivers Headspaced 18" Douglas precision medium contour barrel. 416R stainless polygonal rifling and 1:8 twist with rifle length gas system. Rare Vortex stainless flash hider Low profile .750 Diameter gas block BCM Mod3 Gunfighter charging handle WMD Tactical Nickle Boron Bolt carrier group (FA profile) with MPI tested bolt PRI (Precision Reflex) 15" Carbon Fiber handguard with top, bottom and side rails (This along was $400) Mission First pistol grip with storage plug Lower receiver: Seekins Precision Billet ambi lower Seekins enhanced bolt catch Seekins Magazine release Magpul PRS Precision fully adjustable stock with rifle length buffer and buffer spring KNS Precision anti-rotation trigger/Hammer pins BAttle Arms BAD-ASS Ambi safety setup Spike's Tactical Nickle boron hammer/trigger control group with JP yellow and red springs for a clean 4# pull This one is one stupid soft and accurate shooter. This rifle was just completed and has had exactly 14 rounds of Hornady Match 77gr ammo through it. ************************************************ ************** #2 The Carbine setup: Bottom in the picture Upper receiver: Seekins Precision billet upper M4 Cut receiver BCM Mod3 Gunfighter charging handle Rainier Arms Match 16" Stainless barrel. This is 416R stainless and is Mid-length gas system Rainier arms RMC Mini Muzzle comp BCM Mod3 Gunfighter charging handle Noveske NSR 13.5" Hand guard Low profile .750 Diameter gas block WMD tactical Nickle Boron bolt carrier group (FA profile) with MPI tested bolt Lowe receiver: Seekins Precision billet lower Ambi receiver Seekins enhanced bolt catch Seekins Magazine release KNS Precision anti-rotation trigger/Hammer pins BAttle Arms BAD-ASS Ambi safety setup WMD Nickle boron trigger/hammer group with JP Yellow and red springs for a clean 5# pull (I am polishing it now but it will be installed soon) Magpul MIAD grip in FDE Milspec buffer tube with Heavy buffer and enhanced buffer spring B5 Systems Enhanced B5 stock in FDE This rifle is a sweet shooter as well and has had exactly 44 rounds of Hornady 77gr match roundss through it. Both are New rifles and built by a professional and done CORRECTLY. I will absolutely guarantee these are BUILT correctly and will outshoot most people. I can also work a deal on one of the rifles and the MEGA billet lower receiver shown.