Heritage Grille & ZL1 Skirts Installed !!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

FL2HOTT21 · 05-26-2014, 02:22 AM

So iv had the grille and side skirts at the house for a few weeks now waiting to get the time to install them, final got the free time needed to do the install. Install wasn't to bad, i did all the necessary research on camaro5 so i was prepared. Only real difficult i had was from the wire harness and removing the stock grille from the fascia

. Happy i got everything installed properly and saved a couple $$$$ doing it myself. ZL1 rear diffuser will be next in the future.. i think ill be adding the chevy badge to the heritage grill because i think it looks naked without it, ill most likely paint the gold part satin black and leave the outer chrome alone, also do the same to the rear badge, probably going to remove the SS badge on the rear as well, i have some 1LE badges so they will take the place of the camaro lettering on the sides..

what do u all think, badge in the front of leave it be???

CrystalRedTintcoat · 05-26-2014, 02:29 AM

Congrats on doing this yourself. I started with a badge then removed it on the front of my heritage grill. It looks mean without the bow tie.

14sw1le · 05-26-2014, 07:34 AM

looks good. I like the idea of painting the gold part satin and just really showing off the chrome. should really make it pop.

ST1LE · 05-26-2014, 07:41 AM

Love that look man, very nice! We're twins!! I did keep the bowtie though.

BigBlock69RS · 05-26-2014, 08:13 AM

Looks great! I'm biased thou

scottc · 05-26-2014, 03:17 PM

Looks great!! I think you need ACS rear bumper extensions to really tie everything together, but it looks awesome either way. I just put them on and along with the ZL1 rockers it really just looks more complete. Here's a pic

Polaris Man · 05-26-2014, 03:22 PM

Quote:

Originally Posted by scottc

Looks great!! I think you need ACS rear bumper extensions to really tie everything together, but it looks awesome either way. I just put them on and along with the ZL1 rockers it really just looks more complete. Here's a pic

Where did you get your rear bumper extensions?

Polaris Man · 05-26-2014, 03:25 PM

Quote:

Originally Posted by FL2HOTT21

So iv had the grille and side skirts at the house for a few weeks now waiting to get the time to install them, final got the free time needed to do the install. Install wasn't to bad, i did all the necessary research on camaro5 so i was prepared. Only real difficult i had was from the wire harness and removing the stock grille from the fascia

. Happy i got everything installed properly and saved a couple $$$$ doing it myself. ZL1 rear diffuser will be next in the future.. i think ill be adding the chevy badge to the heritage grill because i think it looks naked without it, ill most likely paint the gold part satin black and leave the outer chrome alone, also do the same to the rear badge, probably going to remove the SS badge on the rear as well, i have some 1LE badges so they will take the place of the camaro lettering on the sides..

what do u all think, badge in the front of leave it be???

I'd put the badge on the front.

scottc · 05-26-2014, 03:45 PM

Quote:

Originally Posted by Polaris Man

Where did you get your rear bumper extensions?

Phasetek

Cleancoupe · 05-26-2014, 04:37 PM

Looks good. We're twins too. I had the bowtie on at first, but then took it off. Looks meaner & more stealth to me with it off. Paint those chrome taillight bezels & tint the taillights & side markers. Makes a world of difference.

Rico · 05-26-2014, 04:56 PM

It looks good, great work

jazzman · 05-26-2014, 05:01 PM

Nice.
Meet Maxine :

Name: 20140526_113754(1).jpg
Views: 640
Size: 771.3 KB

Name: 20140526_113928(1).jpg
Views: 658
Size: 813.2 KB

Name: 20140526_113949(1).jpg
Views: 645
Size: 821.7 KB

Name: 20140526_114040(1).jpg
Views: 657
Size: 200.2 KB

-D

Monte Mac · 05-27-2014, 09:03 AM

Looks good, I left the badges off mine and took off the CAMARO lettering on the sides. Undecided on what I will do with the rear badging. I may just make it a flat or semi-gloss black to go with the rest of the theme of the car.

Here's mine vvvvvvv

http://www.camaro5.com/forums/showpo...postcount=1547

http://www.camaro5.com/forums/showpo...3&postcount=36

jazzman · 05-27-2014, 07:44 PM

Sweet.

05-26-2014, 02:22 AM	#1
FL2HOTT21 Drives: 2013 AGM RS 1LE Join Date: Dec 2012 Location: south FL Posts: 80	Heritage Grille & ZL1 Skirts Installed !!! So iv had the grille and side skirts at the house for a few weeks now waiting to get the time to install them, final got the free time needed to do the install. Install wasn't to bad, i did all the necessary research on camaro5 so i was prepared. Only real difficult i had was from the wire harness and removing the stock grille from the fascia . Happy i got everything installed properly and saved a couple $$$$ doing it myself. ZL1 rear diffuser will be next in the future.. i think ill be adding the chevy badge to the heritage grill because i think it looks naked without it, ill most likely paint the gold part satin black and leave the outer chrome alone, also do the same to the rear badge, probably going to remove the SS badge on the rear as well, i have some 1LE badges so they will take the place of the camaro lettering on the sides.. what do u all think, badge in the front of leave it be??? Attached Images

05-26-2014, 02:29 AM	#2
CrystalRedTintcoat Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012 Location: Bay Area, online, & in my 1LE Posts: 2,667 View My Garage	Congrats on doing this yourself. I started with a badge then removed it on the front of my heritage grill. It looks mean without the bow tie. __________________ 2013 1LE NPP GBE Mods Track Days

05-26-2014, 07:41 AM	#4
ST1LE Drives: E92 BMW M3 Join Date: Oct 2012 Location: Houston Posts: 4,496	TWINS! Love that look man, very nice! We're twins!! I did keep the bowtie though. Attached Images __________________ SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs. J-Rod Built and Matt@FSP Tuned

05-26-2014, 08:13 AM	#5
BigBlock69RS Ed Drives: 2013 AGM Camaro 2SS/RS/1LE Join Date: Dec 2012 Location: Seattle, WA Posts: 951	Looks great! I'm biased thou __________________

05-26-2014, 03:17 PM	#6
scottc Central PA Camaro5 Club Drives: Hot Wheels Join Date: Apr 2009 Location: pa Posts: 2,367	Looks great!! I think you need ACS rear bumper extensions to really tie everything together, but it looks awesome either way. I just put them on and along with the ZL1 rockers it really just looks more complete. Here's a pic Attached Images __________________ Hot Wheel SE # 343

05-26-2014, 07:34 AM	#3
14sw1le Drives: 2014 summit white 2SS/RS/1le Join Date: May 2014 Location: lehigh valley, PA Posts: 131	looks good. I like the idea of painting the gold part satin and just really showing off the chrome. should really make it pop.

05-26-2014, 04:37 PM	#10
Cleancoupe Drives: 18 ZL1 1LE Join Date: Apr 2013 Location: Florida Posts: 703	Looks good. We're twins too. I had the bowtie on at first, but then took it off. Looks meaner & more stealth to me with it off. Paint those chrome taillight bezels & tint the taillights & side markers. Makes a world of difference.

05-26-2014, 04:56 PM	#11
Rico Flying da helicopter Drives: Black SS/RS Join Date: Oct 2009 Location: HI Posts: 1,215 View My Garage	It looks good, great work

05-26-2014, 05:01 PM	#12
jazzman Drives: 2013 Camaro 2SS/RS 1LE Join Date: Oct 2010 Location: Dallas, NC Posts: 28	Nice. Meet Maxine : -D

05-27-2014, 09:03 AM	#13
Monte Mac Drives: 13 1LE, 17 Sierra, 84 MonteSS, Join Date: May 2009 Location: Deaborn Heights, MI Posts: 454 View My Garage	Looks good, I left the badges off mine and took off the CAMARO lettering on the sides. Undecided on what I will do with the rear badging. I may just make it a flat or semi-gloss black to go with the rest of the theme of the car. Here's mine vvvvvvv http://www.camaro5.com/forums/showpo...postcount=1547 http://www.camaro5.com/forums/showpo...3&postcount=36 __________________ [B]Ordered 3/8/13 TPW 4/15/13 Built 4/15/13 Bayed 4/18/13 Released from QC HOLD 5/22/13 PERMAGRIN INSTALLED 5/30/13

05-27-2014, 07:44 PM	#14
jazzman Drives: 2013 Camaro 2SS/RS 1LE Join Date: Oct 2010 Location: Dallas, NC Posts: 28	Sweet.