Any interest in an amp mount bracket for mounting in the spare tire well? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jason@JacFab · 03-27-2014, 10:59 AM

This was a custom order I received via email, it mounts the amp in the spare tire well in front of the battery, and should accept most amps that are 260mm (~10.23") X 180mm (~7.08") or smaller in size. It appears that the Styrofoam piece that the tire inflation device mounts it can stay in place without interfering with the amp/bracket...

I'm will be ordering a new amp to mount one in my car, and I'm waiting/hoping for pictures with the amp and bracket installed on the customers car.

Shown below the finished product (uninstalled), and some pictures of the prototype bracket (before powder coating) installed without an amp.

Features:
•CNC Waterjet cut 16GA Steel
•Durable powder coat finish
•Foam on the flange side that contacts the tire well so as to not scratch the paint
•Stealthy install location
•Easy installation.

Wolvie70 · 03-28-2014, 06:07 PM

PM me how much.

BronxRS · 03-28-2014, 11:36 PM

I am totally interested in this. I love Steve's ******** box but I think my amp is sitting a bit tight on the (OEM location) aftermarket amp rack. I'm paranoid about it overheating (even though its a D class one that runs pretty cool) cos it's just wedged between the rack and the carpeted sub box.

I was considering just going with Steve's passenger side mount but this may do the trick.

How much? PM to 98230. Thanks.

1LE Captain · 03-29-2014, 08:23 AM

Will the stock cable bundles reach that area?

Jason@JacFab · 03-29-2014, 02:10 PM

Quote:

Originally Posted by 1LE Captain

Will the stock cable bundles reach that area?

I seriously doubt it, but I'm not sure. This is geared mainly for people that are adding subs to a non BA system car. Most cables into and out of the amp should be able to remain hidden under the carpet.

PMs sent to both interested parties

Gimpie95 · 06-27-2014, 09:08 PM

I would definitely want this when the time comes to upgrade to a sub! Awesome product!

CreeperRS · 06-28-2014, 04:11 AM

I want this. How much?

mra282 · 01-13-2015, 02:11 PM

I am very interested in this, I been trying to figure out where to install my second amp for dual forward facing subs. Any news about cost?

Jason@JacFab · 01-13-2015, 05:31 PM

Per forum rules, I can't discuss pricing outside of the classifieds so please send me a pm if you are interested in one. I am currently out of stock, but have a batch of them that should be ready within the next week or two (waiting to put a load of stuff together to go to the powder coater to all get done at the same time)

Here is a pic showing an amp installed by an end user

lscamaro · 01-13-2015, 05:41 PM

This lets you mount the amp there even with the stock battery there?

Jason@JacFab · 01-13-2015, 06:01 PM

Quote:

Originally Posted by lscamaro

This lets you mount the amp there even with the stock battery there?

Yes sir!

CHMSC · 01-13-2015, 06:05 PM

That's pretty cool Jason

foo.fighter · 01-14-2015, 07:42 AM

quite interested.. perfect for throwing a sub amp like you mentioned! time to go measure my amp.....

foo.fighter · 01-14-2015, 07:48 AM

mine wont fit Dimensions: 9-1/2"W x 14-3/4"L x 2-7/16"H

03-27-2014, 10:59 AM	#1
Jason@JacFab Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008 Location: Central Point, OR Posts: 5,688 View My Garage	Any interest in an amp mount bracket for mounting in the spare tire well? This was a custom order I received via email, it mounts the amp in the spare tire well in front of the battery, and should accept most amps that are 260mm (~10.23") X 180mm (~7.08") or smaller in size. It appears that the Styrofoam piece that the tire inflation device mounts it can stay in place without interfering with the amp/bracket... I'm will be ordering a new amp to mount one in my car, and I'm waiting/hoping for pictures with the amp and bracket installed on the customers car. Shown below the finished product (uninstalled), and some pictures of the prototype bracket (before powder coating) installed without an amp. Features: •CNC Waterjet cut 16GA Steel •Durable powder coat finish •Foam on the flange side that contacts the tire well so as to not scratch the paint •Stealthy install location •Easy installation. Attached Images

01-13-2015, 05:41 PM	#10
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	This lets you mount the amp there even with the stock battery there? __________________ Click Picture for Build Thread

01-13-2015, 06:05 PM	#12
CHMSC ROAD COURSE JUNKIE Drives: 2012 SS/RS LS3 Join Date: Oct 2012 Location: Somewhere Posts: 4,868 View My Garage	That's pretty cool Jason __________________

01-14-2015, 07:42 AM	#13
foo.fighter Drives: 2013 Camaro 2SS IOM M6 Join Date: Mar 2013 Location: Toronto Posts: 342 View My Garage	quite interested.. perfect for throwing a sub amp like you mentioned! time to go measure my amp..... __________________ 2013 2SS IOM LS3 Performance: NPP Exhaust, Solo Performance Hi-Flow Cats, k&n Air Intake, Doug Thorley Shorty Headers Cosmetic: Diablo Angel Staggered 22", 3D Carbon Fenders (need to install) Eagle Eyes HIDs, Fog Light HIDs

01-14-2015, 07:48 AM	#14
foo.fighter Drives: 2013 Camaro 2SS IOM M6 Join Date: Mar 2013 Location: Toronto Posts: 342 View My Garage	mine wont fit Dimensions: 9-1/2"W x 14-3/4"L x 2-7/16"H __________________ 2013 2SS IOM LS3 Performance: NPP Exhaust, Solo Performance Hi-Flow Cats, k&n Air Intake, Doug Thorley Shorty Headers Cosmetic: Diablo Angel Staggered 22", 3D Carbon Fenders (need to install) Eagle Eyes HIDs, Fog Light HIDs

03-28-2014, 06:07 PM	#2
Wolvie70 Drives: 2016 2SS, Summit White, A8, NPP Join Date: Apr 2013 Location: Arkansas Posts: 717	PM me how much.

03-28-2014, 11:36 PM	#3
BronxRS Drives: '13 2LT RS Convertible - AGM Join Date: Jun 2013 Location: Metro Vancouver BC Posts: 159 View My Garage	I am totally interested in this. I love Steve's ******** box but I think my amp is sitting a bit tight on the (OEM location) aftermarket amp rack. I'm paranoid about it overheating (even though its a D class one that runs pretty cool) cos it's just wedged between the rack and the carpeted sub box. I was considering just going with Steve's passenger side mount but this may do the trick. How much? PM to 98230. Thanks.

03-29-2014, 08:23 AM	#4
1LE Captain Drives: 2014 Red Rock 2SS 1LE RS NPP Join Date: Mar 2014 Location: Hudson Valley New York Posts: 246	Will the stock cable bundles reach that area?

06-27-2014, 09:08 PM	#6
Gimpie95 Drives: 2012 Inferno Orange SS Join Date: Apr 2014 Location: Dover, DE Posts: 247	I would definitely want this when the time comes to upgrade to a sub! Awesome product!

06-28-2014, 04:11 AM	#7
CreeperRS Drives: 20’ Chevrolet Camaro 2SS 1LE Join Date: Jan 2009 Location: San Diego Posts: 1,577	I want this. How much?

01-13-2015, 02:11 PM	#8
mra282 Drives: 2010 Camaro 1LT Join Date: Dec 2014 Location: Maryland Posts: 4 View My Garage	I am very interested in this, I been trying to figure out where to install my second amp for dual forward facing subs. Any news about cost?

01-13-2015, 05:31 PM	#9
Jason@JacFab Drives: 2016 1LT RS Camaro; 72 Chevelle Join Date: Apr 2008 Location: Central Point, OR Posts: 5,688 View My Garage	Per forum rules, I can't discuss pricing outside of the classifieds so please send me a pm if you are interested in one. I am currently out of stock, but have a batch of them that should be ready within the next week or two (waiting to put a load of stuff together to go to the powder coater to all get done at the same time) Here is a pic showing an amp installed by an end user