Official 1/4 Mile (V6) 2010+ Camaro Fast List

[BaylorCamaro]

woah we had a negative DA? that's crazy!

[rtcat600man]

Originally Posted by DarkneSS

Hmm I think you can get those 60ft down even more I feel like I could cut 1.8s-1.85s on nittos if I could pull a 2.0 in the P zeros. Nice run though regardless.


Im going this coming weekend if all goes well. Vararam, 1LT 18s + whatever tires I end up getting and cut outs on stock exhaust. Shooting for a 13.5 run myself.

GOOD LUCK Darkness.................personally I just don't see you getting that low in the 60' or the 1/4 mile.

I know you think so, but after reading these forums for over the past 2 years and watching everything to do with the 1/4 mile, I really don't see that happening with your set-up. I hope the best for you thou. PLEASE prove me wrong and then you will need to tell us how you did it.

Originally Posted by usa1camaro1969

Tires used on the pass: Nitto DR
Performance Mods (if any): BBK Longtubes, CherryBomb V8 catback, Vararam CAI, ported/polished TB, E85 tune by Trifecta
Transmission: M6
Category submitted for: Bolt-ons
R/T...........0.0620
60'............1.9426
330'..........
660'..........8.7607
660’ mph...80.07mph
1000'..........
1320'........13.5195
1320’ mph…100.81mph
Name of the track: Temple Academy(Little River)
Date of pass: 28 Oct 2011
Weather conditions: 50 degrees
DA of -279ft

AWESOME run.......nice job.

WHAT...........Negative DA that far south. That is AWESOME. We can all thank global warming for this one.......

[rtcat600man]

I will be back at the track next Saturday with scrming and a few others. I sure hope to see some negative DA's again.

[DarkneSS]

Originally Posted by rtcat600man

GOOD LUCK Darkness.................personally I just don't see you getting that low in the 60' or the 1/4 mile.

I know you think so, but after reading these forums for over the past 2 years and watching everything to do with the 1/4 mile, I really don't see that happening with your set-up. I hope the best for you thou. PLEASE prove me wrong and then you will need to tell us how you did it.



AWESOME run.......nice job.

WHAT...........Negative DA that far south. That is AWESOME. We can all thank global warming for this one.......

I hope so too! I know Ill definitely hit 13s its just a matter of how deep. Ive improved my shifting as well and Ill actually have mods. Time will tell!

[scrming]

Originally Posted by BaylorAirForce

The only time I was able to go up against usa1 tonight. Thankfully his missing a gear made it a good race

He's in the left lane and I'm in the right.



As you can see from the drag strip drag radials really help out with 60 foot times.... Time to invest I think!

I think you should definitely be able to hit a 2.0x 60' with your setup? What tires are you running? How are you launching?

[usa1camaro1969]

Track prep at our little track is pretty hit n miss with a lot of miss. Maybe someday I'll run it at a big track but for now I'm content and have run at worse.
He's on the stock 20' pirellis.

[formare]

Originally Posted by scrming

I think you should definitely be able to hit a 2.0x 60' with your setup? What tires are you running? How are you launching?

Completely agree - with street tires:

[usa1camaro1969]

Track prep at our little track is pretty hit n miss with a lot of miss. Maybe someday I'll run it at a big track but for now I'm content and have run at worse.
He's on the stock 20' pirellis.

[PitchBlack]

[QUOTE=carguyusa;3941856]The capabilities of a modern V6 is amazing. You can pull 30MPG, mid/low 14s in the 1/4 mile in a somewhat heavy platform, solid reliability, ect. A set of gears, a good 60ft. time, and some driving skill and 13's are a sure thing. A nice alternative to a V8 unlike in the past when any V6 version of a ponycar was a boat anchor at best.[/QUOTE]

I agree. If you would have told me 30 years ago when I was hot rodding the big V8's, that one day I would be driving a V6 with 323 hp I would have laughed my ass off. (Not to mention driving a car that looks as good as my Camaro)

[BaylorCamaro]

Originally Posted by scrming

I think you should definitely be able to hit a 2.0x 60' with your setup? What tires are you running? How are you launching?

Like usa1 said it's stock 20' pirellis with little tread left. I think I'm going to pick up the tires you had on your scrming.

[scrming]

Originally Posted by BaylorAirForce

Like usa1 said it's stock 20' pirellis with little tread left. I think I'm going to pick up the tires you had on your scrming.

Cool... and even if you only spin one wheel, i would still do a good burnout to heat it up... and then once you pull forward a bit, to a bit of a brake torquing to spin a bit to clean them off...

[formare]

I think the stock tires are made of two different compounds - I noticed on mine when I got near the tread wear indicator the traction was non existent.

Originally Posted by BaylorCamaro

Like usa1 said it's stock 20' pirellis with little tread left. I think I'm going to pick up the tires you had on your scrming.

[bmorecam]

Originally Posted by usa1camaro1969

13.51@100.81mph tonight at Temple/Academy Raceway here in Texas. I'll post the slip tomorrow, but if I had the rev-limiter raised just a hair more I'd be giving Rod a run on the bolt-on list. Either I ride the rev-limiter through the lights or shift to fourth.

Great seeing you out there again, BaylorAF.

Negative DA? Wow.

You def bypassed my time. I see that you are ready to take the bolt on list by storm lol.

Hell of a run paul

[BaylorCamaro]

Originally Posted by formare

I think the stock tires are made of two different compounds - I noticed on mine when I got near the tread wear indicator the traction was non existent.

It sure feels that way!

Originally Posted by bmorecam

You def bypassed my time. I see that you are ready to take the bolt on list by storm lol.

Hell of a run paul

I was waiting for you to see this