Factory wheel replacement... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Fiftydriver · 07-12-2011, 08:27 AM

Does anyone make a wheel that looks similiar to the factory 20" machined aluminum wheels but with a 10.5" to 11" wide size? I want to get a pair of wide wheels for my rear end and mount some 315s and then just move the rears to the front if possible.

Just curious if anyone has any information on where to find such a beast.

I have seen some from Sport Muscle that look just like what I want but they are only in 9" wide sizes at the largest.

Thanks for your time.

One more question. Will a 315 fit under the rear end without any mods if the tire is the same height as the factory tires?

barnesql · 07-12-2011, 09:53 AM

If the offset is the same as the stock wheel, but stretched to 11" then no, you will need a spacer. I have read that people have put wheels stretched to 10.5" with a 315 tire on with no problems though.

07-12-2011, 08:27 AM	#1
Fiftydriver Drives: 2010 Camaro 2SSRS RJT L99 Join Date: Jun 2010 Location: Fort Shaw, Montana Posts: 1,242	Factory wheel replacement... Does anyone make a wheel that looks similiar to the factory 20" machined aluminum wheels but with a 10.5" to 11" wide size? I want to get a pair of wide wheels for my rear end and mount some 315s and then just move the rears to the front if possible. Just curious if anyone has any information on where to find such a beast. I have seen some from Sport Muscle that look just like what I want but they are only in 9" wide sizes at the largest. Thanks for your time. One more question. Will a 315 fit under the rear end without any mods if the tire is the same height as the factory tires? __________________ Fiftydriver 2010 SSRS, RJTC, L99, Maggie 2300 SC, 3.4" pulley, Roto-Fab CAI, Dynatech Supermaxx LT headers, Dynatech High Flow cats, Corsa Cat back exhaust, Dual Elite Engineering catch can, MSD wires and Jannetty custom tune, JRE custom diff w/ posi mod, 3.91 LPE gears, Pfaht trailing arms, Pfaht trailing arm and Diff bushings, drop springs and sport sway bars front and back, Fesler dual guage pillar pod w/ AM Cobalt Boost and A/F guages. More to come!!

07-12-2011, 09:53 AM	#2
barnesql Drives: 95' Z28, 2010 2ss RS Join Date: Feb 2010 Location: Mechanicsville, VA Posts: 177	If the offset is the same as the stock wheel, but stretched to 11" then no, you will need a spacer. I have read that people have put wheels stretched to 10.5" with a 315 tire on with no problems though. __________________ 2010 Camaro SS - LS3 Magnaflow 3" Competition Series Catback Off road x-pipe Kooks LT Headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The 2011+ Mustang Thread	GatorBlue371	General Automotive + Other Cars Discussion	11874	08-23-2011 12:30 PM
Factory Reproduction wheel reviews	BAD DAB	Wheels and Tires Talk Sponsored by The Tire Rack	8	03-01-2011 10:05 PM
Looking for one Factory Alum 19" wheel	Pizzapatty	Wheels / Tires	1	01-29-2010 12:44 AM
Factory wheel question	Dave McFly	General Automotive + Other Cars Discussion	2	10-01-2009 01:52 PM
Steering Wheel off center from factory...Advice Please	DCJ	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	5	09-07-2009 11:52 AM