05-04-2009, 02:10 PM | #1 |
NCM-WINR
Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,324
|
Tom Henry Camaro Exhaust (for L99) images & sound clip!
Featured on Homepage
Tom Henry Racing exhaust (for L99 engine) - 3" dual stainless with X Pipe I was going to get some pics for TAG but his car was already off to get exhaust put on it so I missed it. I did finally get to see a IOM (my color!) in person. Hell, I finally got to see a Camaro in person! Anyway whoever owns this car thanks for letting me look it over. Gloomy rainy day so I only saw it under flourescents but even then you can see how it is going to change colors depending on the light angle. Tom twisted my arm pretty hard and had me sit in it. Paper and plastic still in place of course. My first impression of sitting in a new 2010 IOM SS/RS was.....um who am I? Where am I at? Why is my heart racing so damn fast? Honestly I can't tell you what I thought. My mind just went blank. I'm going to go back and see it again when they paint the stripes on it and hopefully I'll get some pics of Tags car then. Anyway here are a couple of pics of the car and with luck a short video of the new Tom Henry Exhaust. I didn't get pics of the new tail pipes and wish I had. They looked to be about 1/4 inch in thickness and looked really good. VIDEO OF EXHAUST:
__________________
also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.
|
05-04-2009, 02:12 PM | #2 |
NCM-WINR
Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,324
|
having trouble with pics give me a few
__________________
also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.
|
05-04-2009, 02:14 PM | #3 |
|
waiting.....
__________________
|
05-04-2009, 02:17 PM | #4 |
NCM-WINR
Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,324
|
pics
|
05-04-2009, 02:18 PM | #5 |
NCM-WINR
Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,324
|
me
__________________
also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.
|
05-04-2009, 02:18 PM | #6 |
|
awesome, that exhaust is beastly looking!
__________________
|
05-04-2009, 02:19 PM | #7 |
NCM-WINR
Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,324
|
thats the stock. I couldn't figure out why GM put a couple of gas tanks on the exhaust
__________________
also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.
|
05-04-2009, 02:24 PM | #8 |
Full Fledged Member
|
Wow, when I heard the stock exhaust was mandrel bent it didnt sound too bad but that is hideous!
__________________
'18 1SS 1LE - DD
'72 Cutlass - LSA topped 370" LS2 |
05-04-2009, 02:27 PM | #9 |
NCM-WINR
Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,324
|
I don't plan on spending to much time laying under the car anyway so its ok by me.
__________________
also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.
|
05-04-2009, 02:31 PM | #10 |
Drives: 2002 Nissan Altima Join Date: Jul 2008
Location: Chicago, IL
Posts: 2,048
|
The stock mufflers are terrible, and are the main reason why an exhaust swap will be my first mod. I can't stand mufflers that are visible from the rear of the car, especially huge silver ones like the stock system.
Too bad you didn't get any pics of the aftermarket exhaust system and tips. |
05-04-2009, 02:39 PM | #11 |
|
no kidding. i'm definitely putting on an aftermarket exhaust on mine, but thats more because it will be a V6 than anything.
__________________
|
05-04-2009, 02:40 PM | #12 |
NCM-WINR
Drives: 2010 SS/RS IOM 2014 2LT Stingray Join Date: Mar 2009
Location: Pittsburgh
Posts: 2,324
|
I know I should have gotten pics of the tips. I'll do that when I go back to see the painted on stripes. Sounds like THR is going to do ones similar to the victory red we've seen. Anyone want to by a stripe kit? Tran is coming to my rescue on the video. I've e-mailed it to him so hopefully he will get it up soon. Thanks Tran
__________________
also drives a heavily modified Jeep Wrangler. It has LED headlights and wheel weights blacked out with Plasti Dip. It's Baller.
|
05-04-2009, 02:42 PM | #13 |
Full Fledged Member
|
No, I mean it doesnt look like it would flow very well, long tubes and custom true duals are the order of the day.
__________________
'18 1SS 1LE - DD
'72 Cutlass - LSA topped 370" LS2 |
05-04-2009, 02:48 PM | #14 |
Administrator
|
Video is posted up in Jamie's first post. SOUNDS MEANNNN!!!
Here it is:
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Camaro Laws | ChevyNut | Off-topic Discussions | 107 | 11-09-2016 05:40 PM |
Heard exhaust of L99 tonight - OMG!!! | Hylton | 5th Gen Camaro SS LS LT General Discussions | 60 | 03-06-2010 05:03 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |
How is the Camaro Sound System? | 2Muchmark | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 14 | 04-27-2009 12:23 PM |
Detroit News panel wants GM to build Camaro concept | Tran | 5th Gen Camaro SS LS LT General Discussions | 12 | 03-15-2009 04:38 PM |