04-13-2011, 01:40 PM | #1 |
Redline drop, or go home
Drives: 2010 Camaro SS Join Date: Oct 2010
Location: Overland Park
Posts: 263
|
Tail light bezel removal and painting DIY
Ok, so I've seen several vids posted here on how to just remove the tail light bezels, but nothing really on sanding them down and/or painting them, so I decided to help out a little and make a few short videos on the whole process. Hope this helps some of you guys out if you're on the fence on deciding if you want to tackle this project! Total cost of sandpaper and paint was only about $14, the most time-consuming was definitely the sanding, as I'm extremely particular about how the end-product will look. As always, patience is your best friend when it comes to doing things yourself. Don't stress, and take your time! You'll enjoy the end result that much more, knowing you saved yourself some hard-earned money!
http://s23.photobucket.com/albums/b3...=VIDEO0075.mp4 http://s23.photobucket.com/albums/b3...=VIDEO0076.mp4 http://s23.photobucket.com/albums/b3...=VIDEO0077.mp4 http://s23.photobucket.com/albums/b3...=VIDEO0078.mp4 http://s23.photobucket.com/albums/b3...=VIDEO0079.mp4 I'll be sure to add some more once I get them installed later this afternoon! Final video, installed on the car: http://s23.photobucket.com/albums/b3...=VIDEO0080.mp4
__________________
I can fix cars. I can't fix people.
2010 Camaro SS #123444 - K&N Typhoon CAI, Muffler Delete, MPD-1 Spoiler, Headlight Armor Blackouts. Mods to come: longtubes/tune/flux capacitor Understeer is when you hit the wall with the front of the car. Oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. Last edited by Viper595; 04-13-2011 at 02:46 PM. |
04-13-2011, 11:46 PM | #2 |
Deep6
Drives: 2016 Camaro #182300 | 2SS | HBM Join Date: Apr 2009
Location: Lansing, MI
Posts: 1,203
|
looks good.
__________________
My Journals: Erick's Mistress - Violet 2016 2SS #182300 | 2SS | HBM | Erick’s Mistress - 2010 2LT #8212 | 2LT | RS | CGM | Litho #165 | |
07-07-2011, 07:51 PM | #3 |
Emerald Coast Camaros
Drives: A lot of show, not much go. Join Date: Mar 2011
Location: Emerald Coast
Posts: 3,388
|
Looks good, man! Thanks for the tutorial! A big help.
|
07-07-2011, 07:54 PM | #4 |
Emerald Coast Camaros
Drives: A lot of show, not much go. Join Date: Mar 2011
Location: Emerald Coast
Posts: 3,388
|
Oh yeah....when you get that flux capacitor figured out....please share the tutorial
|
09-26-2011, 12:15 PM | #5 |
I fly
Drives: 2010 2SS, Stick, Cyber Gray Join Date: Sep 2011
Location: Harker Heights, Texas
Posts: 295
|
I need to do this. NOW! LOL, thanks!
Last edited by Bornluckee13; 09-26-2011 at 12:15 PM. Reason: I can't type good.... |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY - Exhaust Removal and Painting Stock Mufflers | Jaysin | Camaro DIY & HOW-TO instructions & discussions | 3 | 12-29-2010 07:58 PM |