Headrest's HELP cant get them OUT? Thanks ^5

[skipinminn]

I can't find any release botton? Only the button that lets them go up and down :( I'd hate to have to pay to have my new seat covers installed

[Carmikaze]

Same button that allows them to go up and down allows them to be pulled all the way out

[skipinminn]

Originally Posted by Carmikaze

Same button that allows them to go up and down allows them to be pulled all the way out

Doesn't work for me :( wonder what the dealer would charge me to install a set of seat covers ??

[Carmikaze]

Make sure the seat is leaned forward so headrest is not hitting the roof

[skipinminn]

Originally Posted by Carmikaze

Make sure the seat is leaned forward so headrest is not hitting the roof

Yep done this :( I so envy you DIY people who have the patience’s to do this stuff. Just can't get the hang of making it work :(: mad0259:

[sjmautoprod]

Hit the release and pull harder!

[skipinminn]

NOPE? pulled and pulled and pulled. Going to the dealers tomorrow. Screw it let them put them on DIY my ass hahahaha

[64stingray]

Real easy, there are 2 buttons on each headrest 1st push inward on the visible button on the outside of the left retainer if you are kneeling on the seat, keep the pressure on this button while lifting all the way, when it stop, there is a invisible button under the round thing on the right retainer, keep pushing on the left and push on the right one at the same time, come right off

[skipinminn]

THANKS FOR EVERYBODYS help and answers On this. I took the car to the dealrship, They showed me the Bottons everybodys been pointing out. You have to know where to look the relaese botton isn't real easy to notice Well wasn't for me LOLOLOLOL I'm so not a DIY"ER ^5