Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Mechanical Maintenance: Break-in / Oil & Fluids / Servicing


Reply
 
Thread Tools
Old 12-02-2009, 05:26 PM   #1
MadMav
 
Drives: 2010 SS/RS M6
Join Date: Nov 2009
Location: Falcon, CO
Posts: 661
Seriously, when to change oil?

First oil change?

Did a search, and couldn't find anything really.

Manual says change it when the car tells you too.
Dealer says change it at 6K.
I'm at 2K.

When should it really be changed? Did the rear diff and it was silver! I'm guessing that with mobile 1 in the motor that it will not break in as fast as dyno oil. So, would 5K be good? Thanks,


EDIT: After reading for the last hour, there are as many oppinions on when to change it and what to change it with as there are folks on this earth. Guess I will pull from my experiance and go from there. Thanks for the help guys.

Mav
__________________
SS/RS M6, SIM, CGM stripes, Barton S/T, BMR trailing arms, ADM Race intake(no scoop), Texas Speed 1 7/8" headers and full 3" exhaust, RMCR custom tune.

Last edited by MadMav; 12-02-2009 at 09:04 PM.
MadMav is offline   Reply With Quote
Old 12-02-2009, 05:32 PM   #2
surfgun
 
Drives: 2010 SS, 2002 Z/28
Join Date: Jun 2009
Location: Ocean City
Posts: 54
Go ahead and get that fist oil filter off. It has stuff in it.
surfgun is offline   Reply With Quote
Old 12-02-2009, 05:54 PM   #3
Ject
aka Patrick
 
Ject's Avatar
 
Drives: '10 Camaro 2SS '04 Silverado
Join Date: Jan 2009
Location: Derby Kansas
Posts: 3,072
Send a message via Yahoo to Ject
Yeah i'd change it now for sure... I noticed at my 500 mile change it was pretty dirty and had very minimal metal in it.

I changed mine at 500 miles, 1,000 miles and next will be at 6-7k miles
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft
Ject is offline   Reply With Quote
Old 12-02-2009, 05:56 PM   #4
drtwo
 
drtwo's Avatar
 
Drives: 2SS RS Yellow, Raptor, Vrod
Join Date: Jul 2009
Location: South Dakota
Posts: 599
quick quick do it now!!! NOW!!!!!
__________________
2SS RS Rally Yellow, LS3, M6, sunroof, extra on the fast!
drtwo is offline   Reply With Quote
Old 12-02-2009, 06:02 PM   #5
BigMatt
2010 Camaro 2 SS/RS M6
 
BigMatt's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: May 2009
Location: Clayton Delaware
Posts: 1,218
Send a message via AIM to BigMatt
early and often for break in
__________________
Forged LS3, FED M311 heads, CAI Inc, ARH 1 7/8, Corsa Xtreme, Taylor Wires, MGW Shifter, Street slayer twin carbon clutch, Tick braided clutch line & speed bleeder, ZL1 Diff Swap, BMR Split drop, Sway Bars, Trailing Arms, Toe Rods, Pro bushing kit, Carslyle racing 15in conversion, Whipple, LPE dual fuel pumps, Rx catch can, Id1300x, Alky Control
BigMatt is offline   Reply With Quote
Old 12-02-2009, 06:04 PM   #6
CAM MAN

 
CAM MAN's Avatar
 
Drives: ALL 5 GEN CAMAROS
Join Date: May 2009
Location: SanAntonio Texas
Posts: 750
I did mine at 1500 .
CAM MAN is offline   Reply With Quote
Old 12-02-2009, 06:07 PM   #7
HondaPowered
 
HondaPowered's Avatar
 
Drives: '09 Honda Civic LX
Join Date: Jun 2009
Location: Knoxville
Posts: 562
i would say change at 4k. the oil is supposed to help the rings sit, but after 4,000 go ahead and put some super nice synthetic in.
__________________
Saving up for a camaro.

Dream camaro is either a 1/2SS with RS, black with red stripes, or red with white stripes.

No rice with my order.
HondaPowered is offline   Reply With Quote
Old 12-02-2009, 07:16 PM   #8
MadMav
 
Drives: 2010 SS/RS M6
Join Date: Nov 2009
Location: Falcon, CO
Posts: 661
I'm not sure why everyone changes it that early. Can someone give me some solid reason/evidence? Even using dyno oil, most manufactures recommend 3-5K. And my filthy dirty soot catching Cummins was changed at 7500. And to those that say they found metal in the filters. Isn't that what it's for? As long as your oil looks clean, and isn't too old, I can't see the reason of changing that early.

Anyone? I'm not stiring the pot, just really curious.

Mav
__________________
SS/RS M6, SIM, CGM stripes, Barton S/T, BMR trailing arms, ADM Race intake(no scoop), Texas Speed 1 7/8" headers and full 3" exhaust, RMCR custom tune.

Last edited by MadMav; 12-02-2009 at 07:29 PM.
MadMav is offline   Reply With Quote
Old 12-02-2009, 07:25 PM   #9
chopss
 
chopss's Avatar
 
Drives: 04 sentra, 2ss
Join Date: Apr 2009
Location: staten island, ny
Posts: 528
i changed it @ 1500 then at 3000 and again today at around 6700.
i Would change it soon to clean out the engine. Chevy uses mobile 1 sync. oil so after the 1st oil flush i would change it between 3 to 5k miles.
joey
chopss is offline   Reply With Quote
Old 12-02-2009, 07:50 PM   #10
chappy48

 
chappy48's Avatar
 
Drives: 2010 Camaro Auto 2SS/RS
Join Date: Oct 2008
Location: Wauconda, IL
Posts: 878
Quote:
Originally Posted by MadMav View Post
I'm not sure why everyone changes it that early. Can someone give me some solid reason/evidence? Even using dyno oil, most manufactures recommend 3-5K. And my filthy dirty soot catching Cummins was changed at 7500. And to those that say they found metal in the filters. Isn't that what it's for? As long as your oil looks clean, and isn't too old, I can't see the reason of changing that early.

Anyone? I'm not stiring the pot, just really curious.

Mav
It's been gone over before. Search for it in the break-in section.
chappy48 is offline   Reply With Quote
Old 12-02-2009, 07:51 PM   #11
chappy48

 
chappy48's Avatar
 
Drives: 2010 Camaro Auto 2SS/RS
Join Date: Oct 2008
Location: Wauconda, IL
Posts: 878
Quote:
Originally Posted by HondaPowered View Post
i would say change at 4k. the oil is supposed to help the rings sit, but after 4,000 go ahead and put some super nice synthetic in.
It comes with Mobil 1 synthetic from the factory.
chappy48 is offline   Reply With Quote
Old 12-02-2009, 07:53 PM   #12
MadMav
 
Drives: 2010 SS/RS M6
Join Date: Nov 2009
Location: Falcon, CO
Posts: 661
Chappy, I did a search, and couldn't find anything of serious value. I will try again though.

Mav
__________________
SS/RS M6, SIM, CGM stripes, Barton S/T, BMR trailing arms, ADM Race intake(no scoop), Texas Speed 1 7/8" headers and full 3" exhaust, RMCR custom tune.
MadMav is offline   Reply With Quote
Old 12-02-2009, 09:04 PM   #13
OUR72GTO
2010 SIM Beige RS 6M
 
OUR72GTO's Avatar
 
Drives: SIM RS 6M 66 Corvair Silverado LTZ
Join Date: Oct 2008
Location: Kamloops,British Columbia
Posts: 4,677
This should be a Sticky.........every month we see the same rationals for not following the owners manual.
__________________
CAMARO.. 2010 The Heart Beat is back in CHEVROLET
Now let's put it back in America
OUR72GTO is offline   Reply With Quote
Old 12-02-2009, 09:08 PM   #14
faninc
 
Drives: 2010 Camaro RS in SIM
Join Date: May 2009
Location: NJ
Posts: 563
2,000 miles for piece of mind. You spent good money on the new car, an early oil change cannot hurt. I did mine at 2300 miles

J
faninc is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY: Camaro Oil Change adub4185 Camaro DIY & HOW-TO instructions & discussions 180 04-23-2014 06:11 PM
Oil Capacity LS3 Banshee Mechanical Maintenance: Break-in / Oil & Fluids / Servicing 77 04-21-2014 10:19 PM
Save Money on Oil and Oil Filters! 7CAMARO7 Mechanical Maintenance: Break-in / Oil & Fluids / Servicing 4 10-07-2009 08:21 PM
3,000 Miles - No "Metal Shavings" - Anyone Else? FNKNSTN 5th Gen Camaro SS LS LT General Discussions 48 10-05-2009 11:46 PM
Major U.S. oil source is tapped KILLER74Z28 Off-topic Discussions 32 10-30-2007 09:47 AM


All times are GMT -5. The time now is 06:38 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.