thoughts on VMAX Ported Throttle Body andSLP Balancer/Underdrive Pulley - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JTC/C5 · 02-07-2011, 06:48 PM

Just waiting on the above to arrive. was wondering for those of you that haqve these mods done i wanted to know what you thought and how things held up especially on the slp underdrive pulley..

also swapping out my dry air filter for an oiled one (roto-fab)

JTC/C5 · 02-07-2011, 08:15 PM

anyone have either one of these mods??

CyberDan · 02-07-2011, 09:58 PM

I've got the VMax potted tb, and I'm very happy with it...

I've got a question, what are the benefits of replacing The underdrive pulley anyway?

sspaul · 02-07-2011, 10:01 PM

Quote:

Originally Posted by CyberDan

I've got the VMax potted tb, and I'm very happy with it...

I've got a question, what are the benefits of replacing The underdrive pulley anyway?

it's a smaller crank pulley so all the accessories run slower, it frees up about 6-10 rwhp.

Brianskeet · 02-07-2011, 10:23 PM

I have the Vmax throttle body and am very happy with it. Absolutely worth it for the improved feel and precise respose. Extra horses were an added bonus.

tarheel34 · 02-08-2011, 01:38 AM

I have both. Throttle response from the TB is awesome. You can for sure feel the pickup from the pulley as well! I would highly recommend this combo to anyone!

JTC/C5 · 02-08-2011, 06:39 AM

ok great... thank you

there both on the way

Snake Slayer · 02-08-2011, 07:10 AM

Quote:

Originally Posted by JTC/C5

ok great... thank you

there both on the way

These will compliment your current mods. I normally would not reccomend the pulley for a stock car too much work for too little gain. But in your case it should work well. I have the VMAX and love it.

Scott@Bjorn3D · 02-08-2011, 07:27 AM

I have the VMAX with a Cold Air Industries and love it. Now I have to find some sticky tires as I am overpowering the traction control leaving red lights.

JTC/C5 · 02-08-2011, 10:28 AM

Quote:

Originally Posted by Snake Slayer

These will compliment your current mods. I normally would not reccomend the pulley for a stock car too much work for too little gain. But in your case it should work well. I have the VMAX and love it.

exactly.

02-07-2011, 06:48 PM	#1
JTC/C5 Drives: 2010 2SS L99 Join Date: Apr 2010 Location: nj Posts: 395	thoughts on VMAX Ported Throttle Body andSLP Balancer/Underdrive Pulley Just waiting on the above to arrive. was wondering for those of you that haqve these mods done i wanted to know what you thought and how things held up especially on the slp underdrive pulley.. also swapping out my dry air filter for an oiled one (roto-fab) __________________ To Be Continued

02-07-2011, 08:15 PM	#2
JTC/C5 Drives: 2010 2SS L99 Join Date: Apr 2010 Location: nj Posts: 395	anyone have either one of these mods?? __________________ To Be Continued

02-07-2011, 09:58 PM	#3
CyberDan Drives: 1SS Camaro Join Date: Sep 2010 Location: Texas Posts: 661	I've got the VMax potted tb, and I'm very happy with it... I've got a question, what are the benefits of replacing The underdrive pulley anyway? __________________ CAI Cold Air Intake, VMax CNC TB, Borla Sport Catback Exhaust, EE Oil Catch Can, Eibach Sway Bars and Drop Springs, AAC concept side markers, stealth signal bulbs, Heritage grille, Sparks Restorations front and rear modern SS emblems

02-07-2011, 10:23 PM	#5
Brianskeet Brianskeet Drives: RJTC 1SS RS L99 Join Date: Sep 2010 Location: Crestview FL Posts: 771 View My Garage	I have the Vmax throttle body and am very happy with it. Absolutely worth it for the improved feel and precise respose. Extra horses were an added bonus. __________________ ARH 1 7/8 coated LT, High flows, Corsa L99 exhaust, Vmax CNC throttle body, Elite Engineering catch can and tunnel brace, C.A.I. Apex Washer relocation and scoop, Janetty Tune, MSD wires, DEI heat shields, RB rotors and pads, Mike the powder coater calipers, pedders lines, Forgestar F14's, Gorilla nutz, MTI spoiler finished by Gary, Gary's Customz Bow Ties, Side Markers and Tails tinted, Bezels matte black, Badges deleted, Windows Tinted, AAC DRL P13W lights, AAC tinted LED reverse lights, AAC LED interior lights, RPI match painted DRL Bezels, Lis plate frame, Lloyds mats

02-08-2011, 01:38 AM	#6
tarheel34 Go Heels!!! Drives: 2010 Camaro 2SS/RS Join Date: May 2010 Location: WV Posts: 241	I have both. Throttle response from the TB is awesome. You can for sure feel the pickup from the pulley as well! I would highly recommend this combo to anyone! __________________ Team L99 2010 Summit White 2SS/RS L99: TSP 1 7/8 LTs - Off-Road Pipes \| Tuned By BLUECAT \| CAI Cold Air Intake \| ADM Race Scoop \| SLP UD Pulley \| VMAX Throttle Body \| Magnaflow X-Pipe \| Muffler Delete \| SLP 160* T-Stat \| MSD Wires

02-08-2011, 06:39 AM	#7
JTC/C5 Drives: 2010 2SS L99 Join Date: Apr 2010 Location: nj Posts: 395	ok great... thank you there both on the way __________________ To Be Continued

02-08-2011, 07:27 AM	#9
Scott@Bjorn3D Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008 Location: Eufaula, Alabama Posts: 6,427	I have the VMAX with a Cold Air Industries and love it. Now I have to find some sticky tires as I am overpowering the traction control leaving red lights.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VMax CNC Throttle Bodies For V6 LLT Available @ Norris Motorsports - Free Shipping	Mike Norris	V6 Bolt-Ons & Tunes	4	09-27-2010 07:08 PM
Has anyone ported BOTH the throttle body and the intake manifold?	duffmobile	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	4	05-21-2010 04:00 PM
Best method to clean a throttle body on '99 Z	Broshot	4th Generation Camaros	5	07-19-2009 11:50 PM
LS3 same as LS2 Throttle Body?	ZZcamaro	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	10	06-12-2009 09:38 AM