Ny-Trex NOS system for V6 Group Buy - Page 64 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

IneedAZ · 07-11-2013, 08:34 PM

Good news, decided to go with a custom dynotunenitrous dual gauge of pressure and wideband afr. Custom colors and logo. Not cheap though..nearly $500. I plan to mount it where my amp controller is in the photo I shared. I will relocate the amp controller to glovebox.

IneedAZ · 07-11-2013, 08:34 PM

Now just need to get plugs.

PoorMansCamaro · 07-11-2013, 08:35 PM

Quote:

Originally Posted by IneedAZ

Good news, decided to go with a custom dynotunenitrous dual gauge of pressure and wideband afr. Custom colors and logo. Not cheap though..nearly $500. I plan to mount it where my amp controller is in the photo I shared. I will relocate the amp controller to glovebox.

Yeah, I was thinking the same, but just too much money right now

tonymac · 07-11-2013, 08:39 PM

Well...I have had a change of heart. After all this work I have been doing on the switch panel (actually got it done) - I have decided to uninstall everything and sell off this kit along with everything I have bought for it. The only thing I was waiting to install was the controller...
My wife just rolled her eyes at me when I told her I was going to sell it after all the time I have spent getting everything installed. So no boosting for me.
I hope the rest of you have some fun with the kit!

IneedAZ · 07-11-2013, 08:40 PM

Quote:

Originally Posted by PoorMansCamaro

Yeah, I was thinking the same, but just too much money right now

I hear ya...I had sticker shock...the afr controller was $199 itself

IneedAZ · 07-11-2013, 08:41 PM

Quote:

Originally Posted by tonymac

Well...I have had a change of heart. After all this work I have been doing on the switch panel (actually got it done) - I have decided to uninstall everything and sell off this kit along with everything I have bought for it. The only thing I was waiting to install was the controller...
My wife just rolled her eyes at me when I told her I was going to sell it after all the time I have spent getting everything installed. So no boosting for me.
I hope the rest of you have some fun with the kit!

Hope u got your investment back.

jewel25 · 07-11-2013, 08:41 PM

Need to save money

IneedAZ · 07-11-2013, 08:44 PM

Forgot to mention I got the msd window switch installed. Appears to be within 100 rpm of factory tach at various rpms

tonymac · 07-11-2013, 08:45 PM

Quote:

Originally Posted by IneedAZ

Hope u got your investment back.

Well, I hope so too! Just want what I paid or close to it. I am bummed, but I feel there are other things I want to do to the car. I will post it for sale on these forums as well as locally.
I appreciate all the help along the way...

IneedAZ · 07-11-2013, 08:49 PM

Quote:

Originally Posted by tonymac

Well, I hope so too! Just want what I paid or close to it. I am bummed, but I feel there are other things I want to do to the car. I will post it for sale on these forums as well as locally.
I appreciate all the help along the way...

Well, if u ever change your mind we will have it worked out by then...lol...

IneedAZ · 07-11-2013, 08:53 PM

I had to give up swapping my motor in the 67 this year cause all the money I just spent on this car. I went from doing no mods to all mods. I just spent another $1500 + in dress up stuff plus did the ss rear swap last month. I will be done for a long time on this car. Got to save money for the 67. That motor is $25k

tonymac · 07-11-2013, 09:02 PM

Quote:

Originally Posted by IneedAZ

I had to give up swapping my motor in the 67 this year cause all the money I just spent on this car. I went from doing no mods to all mods. I just spent another $1500 + in dress up stuff plus did the ss rear swap last month. I will be done for a long time on this car. Got to save money for the 67. That motor is $25k

Holy crap...$25k? That is for another thread, but daaaamn! I'll be keeping an eye on this thread!

PoorMansCamaro · 07-11-2013, 09:04 PM

Quote:

Originally Posted by tonymac

Well, I hope so too! Just want what I paid or close to it. I am bummed, but I feel there are other things I want to do to the car. I will post it for sale on these forums as well as locally.
I appreciate all the help along the way...

How much for the custom switch panel?

IneedAZ · 07-11-2013, 09:10 PM

Quote:

Originally Posted by tonymac

Holy crap...$25k? That is for another thread, but daaaamn! I'll be keeping an eye on this thread!

I plan to pull my nitrous 454 out and put a 555 with a twin screw supercharger and fuel injection. It will put the car in the 8's.

07-11-2013, 08:34 PM	#883
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	Good news, decided to go with a custom dynotunenitrous dual gauge of pressure and wideband afr. Custom colors and logo. Not cheap though..nearly $500. I plan to mount it where my amp controller is in the photo I shared. I will relocate the amp controller to glovebox. __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

07-11-2013, 08:34 PM	#884
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	Now just need to get plugs. __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

07-11-2013, 08:41 PM	#889
jewel25 Mother of PWA Babies Drives: 2011 RJT 2LT/RS Join Date: Apr 2011 Location: Central Pennsylvania Posts: 37,110 View My Garage	Need to save money __________________ Jewel & PMC's Build Thread

07-11-2013, 08:44 PM	#890
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	Forgot to mention I got the msd window switch installed. Appears to be within 100 rpm of factory tach at various rpms __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

07-11-2013, 08:53 PM	#893
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	I had to give up swapping my motor in the 67 this year cause all the money I just spent on this car. I went from doing no mods to all mods. I just spent another $1500 + in dress up stuff plus did the ss rear swap last month. I will be done for a long time on this car. Got to save money for the 67. That motor is $25k __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

07-11-2013, 08:39 PM	#886
tonymac Drives: '14 Blk SS 2SS/RS 1LE - SOLD :-( Join Date: Apr 2013 Location: Apollo Beach, FL Posts: 161 View My Garage	Well...I have had a change of heart. After all this work I have been doing on the switch panel (actually got it done) - I have decided to uninstall everything and sell off this kit along with everything I have bought for it. The only thing I was waiting to install was the controller... My wife just rolled her eyes at me when I told her I was going to sell it after all the time I have spent getting everything installed. So no boosting for me. I hope the rest of you have some fun with the kit!