Eagle Eye Headlights with VLED Turn Signals

[Cmlloveless]

I don't know who told you that, but yes you need them!

[BlessedChef10]

Ok thanks.

[BlessedChef10]

turn out I was sent the wrong bulbs. Im changing them out soon as they come in and yes Im going to use the load resistors

[Cmlloveless]

Originally Posted by Cmlloveless

Attachment 180006

Im sure there are a few bugs that might arise from it, but for the most part it should work. The power supply should work off any 12V constant or if you want it to turn on with something else (i.e. halos/drl's) then you may end up haveing to throw a T connector on there to splice it in. But atleast its only 1 line to splice if you want to.

I found and ordered a set of 3157 wedge bulb base pigtails! I will be making a harness like the one I posted up! Ill let you know how it works out!

I may even make a small harness to plug into the halos the same way so that I can take the power supply from them without splicing the power wire on the factory harness!

[XLethal 360]

hey guys if you buy these enter the coupon code Chrome10, and save $10 off your order from stealthauto.com

[Tx1Lt]

Just ordered mine, can't wait!

[Tx1Lt]

Hey Erk, which led temp did you get? The 5k or 6k? I ordered the 5k to see if they would match the halos. Please let me know pal.

Rob

[H3LL1ON]

http://www.v-leds.com/Exterior-LED/T...68713-1-2.html

Type 1 alternates white and amber when the turn signal is applied
Type 2 only the amber flashes when the turn signal is applied.

http://www.v-leds.com/Exterior-LED/T...72046-1-2.html
Warning! If your vehicle is equipped with Daytime Running Lights that function through this bulb you cannot use it.

Does the warning above apply to me? Maybe as mine is a Canadian model with forced DRL's?

Other than the second one specifying 6000k which one will work for a 1LT obv non rs, Canadian model with forced DRL.

I think i need this to prevent DIC errors and possibly hyperflashing:
http://www.v-leds.com/BlinkerWarning...-p8726800.html

Type 2 would be the right choice i think as i wouldnt want white AND orange flashing for turn signals correct?

FYIW- I have bought the Eagle Eyes with this kit from VVME:

1 x 24V 35W H9 HID Conversion Kit (VVME-HKSH9-24V)

Fogs i bought this from iJDMTOY.com :

LED_FOG_5202_SKU_4EXenon White 68-SMD 360-degree shine 5202 (aka H16) Hyper-Flux LED Bulbs For Fog Lights, Daytime Running Lights or Driving Lights

[caverman]

Originally Posted by H3LL1ON

Fogs i bought this from iJDMTOY.com :

LED_FOG_5202_SKU_4EXenon White 68-SMD 360-degree shine 5202 (aka H16) Hyper-Flux LED Bulbs For Fog Lights, Daytime Running Lights or Driving Lights

These look like the same thing that AAC sells (for double the price). The ones I got a while back from AAC were more like a 4300k - 5000k look but the description of these on iJDMTOY say 6000k.

What color do you think they look like?

[Tx1Lt]

These are the iJDMTOY hyperflux 6000k fog LEDs. I had them right before I installed my hid foglight kit.


They have that little bit of blue in them. Great for the price. I just sold mine for $40.

[caverman]

Originally Posted by Tx1Lt

These are the iJDMTOY hyperflux 6000k fog LEDs. I had them right before I installed my hid foglight kit.


They have that little bit of blue in them. Great for the price. I just sold mine for $40.

Thanks...too blue for the 5000k IMO.

I think I'm goning to try my AAC 5202 bulbs again tomorrow. The clips are broken off but if they work and look close enough in color to the 5000k then I'll find a way to get them to stay. Before they were too white....now my V-LEDs are too blue. Knowing my luck they'll look okay now but have an LED out or something.

Trying not to spend more on a set of fogs at the moment because my mod fund is drained and I just spent another $165 today on a ported throttle body.

[Tx1Lt]

Originally Posted by caverman

Thanks...too blue for the 5000k IMO.

They're not 5000k, they're 6000k. That's why they look bluish.

[caverman]

Yeah....I was just curious if they were truely 6000k. They look just like the ones I got from AAC which I was told would match 6000k. When I put them on they didn't. They were more like 4300k which is why I took them out. So I was wondering if they were really 6000k. Your pics prove they are.

BTW: The HID kit you got for the fogs, did the ballasts just plug in directly to the factory fog light plug?

[H3LL1ON]

TYPE 2 DUAL COLOR CHANGING HID 6K WHITE AMBER SWITCHBACK 60 M-SMT TURN SIGNAL BULBS 3157 3157NA 3357 3457 4157 4057

6 OHM 50W 2 BULB LED LOAD EQUALIZER RESISTORS TURN SIGNAL BLINKER FIX WITH MOUNTING PLATES

I just ordered these i will see how they match my 6000k HID kit and 6000K Led Fog bulbs. Cross your fingers :]