What Did You Do To Your Camaro Today? - Page 1602 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Caniac27 · 06-01-2019, 09:12 PM

Finally got the time to install the ZL1 grille and street scene splitter. Love the aggressive transformation. Some before, during and after pics!

Mr2Hard2See · 06-01-2019, 09:13 PM

I peeled the blackout from the facia and added the claw marks

xstuntman · 06-01-2019, 10:07 PM

Quote:

Originally Posted by Caniac27

Finally got the time to install the ZL1 grille and street scene splitter. Love the aggressive transformation. Some before, during and after pics!

Looks sweet!

Any fitment issues with the splitter? I've heard a lot of bad with Street Scene splitters on the V6 10-13s.

Caniac27 · 06-01-2019, 10:17 PM

Quote:

Originally Posted by xstuntman

Looks sweet!

Any fitment issues with the splitter? I've heard a lot of bad with Street Scene splitters on the V6 10-13s.

Thanks. The splitter is definitely not perfect but nothing major. The molding is not the best. Had to do some sanding and seemed a little short width wise but nothing that couldn't be fixed with some additional screws to get it permanently mounted. The small screws they send are pretty much useless. I bought some new hardware and bolted it on.

J Rod · 06-03-2019, 09:39 AM

Quote:

Originally Posted by InFiD3ViL

What did you use? It came out great! Did you remove your hood vent?
When I did mine I used 3M 1080 Satin Black. It came out a bit glossier than I expected, but it looks good. It was a very easy wrap to work with though.

Yes it was very forgiving, I thought I ruined it a few times with creases but a little heat fixed it right up. I went with 3M Matte Black and yes I did remove the vent. I already had the drip tray off since it wouldn't clear my LSA so it was just a matter of removing the 6 bolts.

Welker2 · 06-03-2019, 12:33 PM

Made a quick stop at Starbucks for the wife while out running some errands; came out to find I was parked amongst some friendly rivals. The Challenger was there when I pulled in, the Mustang pulled in while I was in Starbucks. Couldn't help stopping to take a quick a pic …

Moto-Mojo · 06-03-2019, 06:20 PM

I retired! (just the rears) And re-rimmed.

Name: 36B3707F-D110-4FFA-8B6D-B1D7E66C0812.jpg
Views: 561
Size: 261.5 KB

STALKER · 06-03-2019, 07:22 PM

Quote:

Originally Posted by 1JEWLDSSRS

Man bro that sounds amazing!!! Good luck with her and get her out on the road !!

Thanks man!

InFiD3ViL · 06-04-2019, 11:45 AM

Ordered a full set of Firestone Firehawk Indy 500 tires. Cannot wait to get those bad boys on.

Jonesm24 · 06-04-2019, 11:56 AM

Got up extra early this morning and drove it to work. Very light traffic and I got the best parking spot in the complex!

Arogg · 06-04-2019, 01:57 PM

New drilled and slotted R1 Concept Rotors, new pads, and BMR lowering springs. Ill get some pics once I get the car washed up. Its spends most of its time lately sitting in the yard at work from Sunday night to Friday night while I drive the company car.

Spec · 06-04-2019, 06:52 PM

Quote:

Originally Posted by InFiD3ViL

Ordered a full set of Firestone Firehawk Indy 500 tires. Cannot wait to get those bad boys on.

They're very good tires... enjoy!

Had them on before I switched to the NT555 G2's. The Nitto's look a bit more agressive and better to my liking. But them Indy 500's ain't no joke.

Dusk_2SS · 06-05-2019, 01:12 AM

Showed of the matching side skirts and front splitter I painted myself.

George-CZ · 06-06-2019, 12:13 AM

Quote:

Originally Posted by Dusk_2SS

Showed of the matching side skirts and front splitter I painted myself.

👌👌👌

06-01-2019, 09:12 PM	#22415
Caniac27 Drives: 2016 Chevy Colorado, Red Rock Join Date: Jan 2017 Location: NC Posts: 138 View My Garage	Finally got the time to install the ZL1 grille and street scene splitter. Love the aggressive transformation. Some before, during and after pics! Attached Images __________________ 2016 Chevy Colorado (Daily Driver) 2013 Camaro 2LT/RS (Traded 2020)

06-01-2019, 09:13 PM	#22416
Mr2Hard2See Instagram: Mr2Hard2See Drives: 2011 2SS/ RS Join Date: Apr 2018 Location: SF Bay Area Posts: 691	I peeled the blackout from the facia and added the claw marks Attached Images __________________ YOUTUBE CHANNEL: Mr2Hard2See LSA blower BTR stg 2 cam 227/242 BTR dual springs pushrods lifters retainers etc Che bronze trunnion Ls3 timing/valley cover Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers

06-03-2019, 12:33 PM	#22420
Welker2 Ret AF, cancer survivor Drives: 2013 Camaro 2SS/RS & 2006 Corvette Join Date: Jul 2015 Location: Mesquite, NV Posts: 2,741 View My Garage	Made a quick stop at Starbucks for the wife while out running some errands; came out to find I was parked amongst some friendly rivals. The Challenger was there when I pulled in, the Mustang pulled in while I was in Starbucks. Couldn't help stopping to take a quick a pic … Attached Images __________________

06-03-2019, 06:20 PM	#22421
Moto-Mojo Fast Cars and Old Guitars Drives: 2015 2SS RS (L99, baby!) Join Date: Apr 2012 Location: N. CA Posts: 3,981	I retired! (just the rears) And re-rimmed. __________________ “I don’t want to belong to any club that would have me as a member.” - Groucho Marx

06-04-2019, 11:45 AM	#22423
InFiD3ViL Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016 Location: Spring Hill, FL Posts: 4,584	Ordered a full set of Firestone Firehawk Indy 500 tires. Cannot wait to get those bad boys on. __________________ 2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI

06-04-2019, 11:56 AM	#22424
Jonesm24 Drives: 2012 2SS Victory Red convertible Join Date: May 2016 Location: Michigan Posts: 260	Got up extra early this morning and drove it to work. Very light traffic and I got the best parking spot in the complex! Attached Images

06-04-2019, 01:57 PM	#22425
Arogg A legend in his own mind Drives: 2010 2SS/RS M6 Join Date: May 2013 Location: Long Island, New York Posts: 828	New drilled and slotted R1 Concept Rotors, new pads, and BMR lowering springs. Ill get some pics once I get the car washed up. Its spends most of its time lately sitting in the yard at work from Sunday night to Friday night while I drive the company car. __________________ 2010 2SS/RS "The Mistress" Color matched OEM GFX / VIS Carbon Fiber Hood (absolute trash quality and customer service ) / Heritage Grille / 5% Windows / 30% Windshield tint with 5% visor strip / Tinted Exterior Lights / Streetfighter LA Spoiler / Morimoto XB LED fogs / LED sidemarkers / Airaid CAI / Hurst Short Throw / TSP LT's / No cats / No resonator / Corsa Xtreme Catback / Trifecta Tune / Factory amp replaced / 2 JL Audio 12's in the trunk / MRR 228 Wheels / BMR Springs / Moog Endlinks / R1 Concepts Rotors & Pads

06-05-2019, 01:12 AM	#22427
Dusk_2SS Drives: 2013 Dusk Special Edition 2SS/RS Join Date: May 2017 Location: Tacoma WA Posts: 125 View My Garage	Showed of the matching side skirts and front splitter I painted myself. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS	Info@PeddersUSA.com	USA - Texas	39	02-01-2010 12:48 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM