05-26-2013, 04:26 PM | #57 |
Drives: 2013 1SS Panther 1993 B4C Join Date: Jul 2012
Location: Methuen, MA
Posts: 214
|
Email sent, thanks!
__________________
2013 1SS M6 Panther
1993 B4C M6 1993 B4C A4 |
05-27-2013, 11:02 AM | #58 |
Drives: 2016 1SS Hyper Blue 6M MRC NPP Join Date: Mar 2009
Location: Frederick, MD
Posts: 125
|
Just sent order email
Gary |
05-28-2013, 10:31 PM | #59 |
There is no way we can pick our ZL1 up with a floor jack by using the owners manual, the manual is for the cars with a jack that comes in the trunk. I even looked in the maint manual and it was confusing also. It's that you do not want to bend the floor pan and have to go so far inboard to get to the subframe.
|
|
06-08-2013, 08:59 PM | #60 |
Many members ask if we can use the jack pads with jack stands?? You could but I would not recommend it. It is better to put the jack stands under the sub frame and use the jack pads to jack the car up. If you want to put the jack stands at the pinch weld you can but no need for the jack pads, the jack stands are small enough to fit inside the rocker covers. The pads are made to keep a large top lift or floor jack from crushing the lower rocker cover.
Last edited by Skylane765; 06-08-2013 at 09:19 PM. |
|
06-14-2013, 03:30 PM | #61 |
We now have jack pads for the late model Mustang, Corvette, Challenger and Charger.
|
|
06-29-2013, 04:38 PM | #62 |
Here is a look with my car jacked up with the jack pad, many ask how it fits on the pinch weld.
|
|
06-29-2013, 04:47 PM | #63 |
ROCK
Drives: 2013 ZL-1 TRIPLE BLACK VERT Join Date: Oct 2012
Location: DENVER COLORADO
Posts: 609
|
JUST WANTED TO SAY THANKS FOR THE NEW PADS I GOT FOR MY 2013 VERT. GREAT PRODUCT AND SERVICE CAN'T B BEAT!!
ROCK
__________________
WHEN ONE AMERICAN IS NOT WORTHY TO BE FOUND...THEN WE AS AMERICANS HAVE LOST. POW/MIA YOU ARE NOT FORGOTTEN
|
06-29-2013, 05:01 PM | #64 |
DBLCHBY III
Drives: 15 1LE Join Date: Jun 2011
Location: Team Canada
Posts: 2,789
|
Just ordered some!
__________________
|
06-29-2013, 05:31 PM | #65 | |
Drives: ZL1 Join Date: Jun 2013
Location: Stafford, VA
Posts: 156
|
Quote:
Greg
__________________
|
|
06-29-2013, 09:03 PM | #66 |
Drives: 2012 triple black ZL-1 #799 Join Date: Jun 2012
Location: Ocean Springs, MS
Posts: 191
|
|
06-29-2013, 11:03 PM | #67 |
Drives: ZL1 Join Date: Jun 2013
Location: Stafford, VA
Posts: 156
|
Thanks.
__________________
|
08-30-2013, 03:04 PM | #68 |
08-30-2013, 03:14 PM | #69 |
Drives: 2013 ZL1,1972 Dart, 1947 Willys Join Date: Sep 2012
Location: Ontario Canada
Posts: 84
|
John, does the jack pad make contact just on the pinch weld, on either side of pinch weld, or all three points?
|
08-31-2013, 12:37 PM | #70 |
It makes contact with the bottom of the pinch weld and the inner floor pan. The opening in the lower panel is for a jack with a slotted top to just pick up on the pinch weld. Our ZL1s do not have a jack or any correct info on how to jack the car up. I have the complete manual and the owners manual and they do not give correct info. So I came up with the jack pads so I could lift my car with a lift or floor jack.
|
|
|
|
Thread Tools | |
|
|