08-17-2013, 09:19 AM | #1 |
Account Suspended
Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011
Location: NB,Canada
Posts: 834
|
quietest exhaust for 600+rwhp
I'm working on a TVS supercharged Camaro at the shop right now.
It has JBA long tube headers, small cats and stock exhaust. Engine has forged pistons,rods,and crank. We are checking the motor out and upgrading the valvetrain for something more TVS supercharger friendly.It still ran the stock valvesprings and trunions Currently the boost is set at 10-11 psi.Will probably keep it there for now. I know I have to remove those darn cats. Did anybody have made 600-650 rwhp (M6) with the stock exhaust? Or is their something else that is out there that would flow better,but also as quiet? Customer does not want to draw attention. Just asking for opinions. Thanks in advance. |
08-17-2013, 09:33 AM | #2 |
Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011
Location: Texas RGV
Posts: 794
|
My Corsa is very quiet at idle and cruising yet sounds different and to me a lot better than most exhaust I've heard personally. At WOT it gets LOUD.
|
08-17-2013, 09:36 AM | #3 |
Account Suspended
Drives: 2010 2SS/RS Red Jewel L99 Join Date: Jun 2011
Location: NB,Canada
Posts: 834
|
Thanks DarkCry956.Corsa is a great exhaust.Do you have the sport or the touring model?
Worse case.Could even install a L99 exhaust instead. But will the performance be there???? |
08-17-2013, 09:38 AM | #4 |
Drives: V10 BMW M5, Supercharged 2SS/RS Join Date: Jun 2010
Location: Charlotte NC /Brooklyn NY
Posts: 2,305
|
Magnaflow street is a tad quieter than anything else out there, but just a tad. The car will be loud.
__________________
MAST 416 STROKER: STAGE 3 TVS 2300 CUSTOM CAM TPIS 102 TB IW 8 RIB PULLEY W/ OD COG REARS NX EXPRESS/NANO KIT KDI HEAT EXCHANGER/ROTOFAB RESERVOIR CIRCLE D 2800 TC/FLEX PLATE/ADM TRANS COOLER DSS DRIVESHAFT/1400 HP AXLES EATON TRUETRAC -LPE 3.27 GEARS DYNATECH HEADERS/MAGNAFLOW EXHAUST SQUASH RETURN STYLE FS ID 850's E85/ FLEXFUEL BMR/EIBACH SUSPENSION KILL MODE, ON. |
08-17-2013, 10:02 AM | #5 |
Drives: 2010 Camaro SS, 2008 Heritage 300C Join Date: Jun 2009
Location: Wisconsin
Posts: 1,911
|
I'm running 2x3" ARH's and the quieter borla series axle-back, everything in between was custom made and also have cutouts...So I get a nice growl for when I don't want to be bothered by the police, and insanely loud when I want to give myself a heart attack.
Either way, unless you really muffle down the entire exhaust, it will be "loud" to a certain point at those power levels.
__________________
|
08-17-2013, 10:15 AM | #6 |
PHAT B33
Drives: 2012 TF3 Camaro 2SS/RS M6 Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,460
|
Solo Mach XL J pipe system is reasonable at light throttle under 2k rpm with headers, catless. It barks loud WOT though. I love it as there is zero drone now. I had a 3" MBPR system x piped and swapped out the x for the resonated H and the drone still killed me 1400-1700 rpm.
As was posted above, it's gonna be loud under load no matter what. My wife commented on how much quieter it is now, she doesn't hear me leave or come home like she used too. The j pipes really work at low RPM.
__________________
Another 1 of 371 '12 T3 LS3 M6's built.
|
08-17-2013, 10:33 AM | #7 |
Drives: 2011 Camaro 2SS/RS Join Date: Oct 2011
Location: Texas RGV
Posts: 794
|
I got the regular Corsa for an L99. I don't think they had touring or sport when I got my setup. I think sport and touring are for the ZL1 actually but I don't know. I've gone from long tubes to Cam to Blower and its always been quiet at idle and cruising.
|
08-17-2013, 10:38 AM | #8 |
Drives: 2017 Z06 / 2012 CTS Join Date: Jul 2013
Location: NY
Posts: 731
|
+1 on the Solo Mach XL exhaust, I have LTs with my Maggy. Mellow under 2K and at idle. When you get into it though it has a very nice clean tone, one of the best i've heard.
__________________
SOLD - Maggie Powered 2011 2SS
Procharged Powered 2017 Z06 |
08-17-2013, 11:21 AM | #9 |
Drives: 2010 rs/ss black # 10,308 Join Date: Mar 2009
Location: hoffman estates, il
Posts: 914
|
I know its not a camaro, but my buddy has a twin turbo V8 lexuas SC400. He was the same way to where he wanted to keep it quite. So he has no cats on the car, but lined up 6 total mufflers (3 on each side). Now its got a little rumble to it, but is super quite. He put down over 550whp with it setup this way too. So it can be done, and i am sure if he took a few of the mufflers off he might make a little more power. But it amazes people how quick the car. My camaro stock with stock exhaust was louder than his car.
__________________
|
08-17-2013, 11:46 AM | #10 |
Drives: LS3 Join Date: Mar 2012
Location: Qatar
Posts: 122
|
Magnaflow street series + magnaflow x resonated pipe + ARH 1 7/8 LT+ custom j pipe and my LS3 (830 rwhp) is super quite.. All i hear is the d1 pulley turning...
__________________
Texas Speed & Performance Custom Built Forged 408 CID, PRC LS3 260CC,Fast Intake & NW 102 TB, Alky Methanol kit, ID850, LPE Dual pumps,,Melling HV oil Pump. D1SC 10PSI, Stage 2 Air Intake,Magnaflow Axle back, Mcleod clutch, Pedders XA coilovers and sway bars, HD bushings, Hurst shifter, ACS bumper and hood ports, DSS aluminum drive shaft, CSF radiator .
|
08-17-2013, 11:57 AM | #11 |
V8 lounge member #5
Drives: 12 2SS Synergy Camaro, 05 PontiacG6 Join Date: Dec 2011
Location: Ohio
Posts: 1,301
|
I have the stock a6 exhaust with 2" headers no cats. Quietest possibility at that hp..
|
08-17-2013, 02:57 PM | #12 |
Choke on that causality!
Drives: 2010 2SS/RS Join Date: Sep 2009
Location: Minnesota
Posts: 645
|
I kept the stock mufflers, quiet as a church while cruising, Loud enough when you hit it.
__________________
Edelbrock EForce - Stainless Works Headers - BMR Sways & Arms & Toe Links & Control Arm Bushings & End Links - Rotofab CAI - Assorted Interior, Exterior, Underhood Bling - Red Jewel Stripes & Full Body Clear - Lexani LX15 Wheels - JRE Fuel Rail Upgrade - Kenne Bell BAP - Heartthrob XPipe - Elite Catch Can - Pedders Cradle & Front Arm Bushings - Hotchkis Strut Brace - MSD Wires - Carbotech Brakes - DSS 1000HP Axles & Driveshaft - Mickey Thompson Tires - Halo Harness - AutoMeter A/F, Boost, Fuel Pressure Gauges - Whats Next?
|
08-17-2013, 03:04 PM | #13 |
Bayou City Muscle Cars
Drives: 2013 2SS Dusk Edition Join Date: Jan 2013
Location: Houston Texas
Posts: 1,443
|
NPP and keep it closed with an ADM module or stock mode for permformance.
__________________
2013 2SS Dusk Edition
Lethal Racing Stage V PER 418ci Forged LS3 530/520 SAE |
08-17-2013, 03:08 PM | #14 |
Yea stock but that will rattle a bit. I went with Borla Touring exhaust. With my Kooks 1 7/8 headers and off road pipes it sounds good not to loud but dose come alive at WOT.
|
|
|
|
|
|