Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V6 LLT Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 06-13-2011, 05:10 PM   #1821
rolnslo
Rolling along...
 
rolnslo's Avatar
 
Drives: 2011 2SS/RS SGM
Join Date: Mar 2008
Location: Houston, TX
Posts: 4,380
No problem. It should stay put either way. If you can, maybe pull off the red hose and test fit the intake against the throttle body to ensure that you get a nice fit between the end of the intake and the opening on the throttle body. It should line up with minimal gaps all around. You would only be able to see that without the red coupling hose in place.
__________________
rolnslo is offline   Reply With Quote
Old 06-13-2011, 05:12 PM   #1822
chozn4service


 
chozn4service's Avatar
 
Drives: 2016 SS w/2SS A8 Blue Velvet
Join Date: Dec 2009
Location: 39.793153,-86.238223
Posts: 3,678
GOT IT! I used my flat head and pushed gently on the front edge of the reb tube which slid it back where it needs to be. Now closing it up and washing my heads and watch some evening news. GO CONGRATS to the MAVs!
__________________
Never grow up, it's a trap!
chozn4service is offline   Reply With Quote
Old 06-13-2011, 05:13 PM   #1823
rolnslo
Rolling along...
 
rolnslo's Avatar
 
Drives: 2011 2SS/RS SGM
Join Date: Mar 2008
Location: Houston, TX
Posts: 4,380
__________________
rolnslo is offline   Reply With Quote
Old 06-13-2011, 05:15 PM   #1824
GoPaul
H-Town Camaro Club
 
GoPaul's Avatar
 
Drives: 2010 Black Camaro 2LT RS M6
Join Date: Apr 2010
Location: Katy, TX
Posts: 926
Quote:
Originally Posted by chozn4service View Post
GOT IT! I used my flat head and pushed gently on the front edge of the reb tube which slid it back where it needs to be. Now closing it up and washing my heads and watch some evening news. GO CONGRATS to the MAVs!
nice job bud, I just got home and opened my box up - deciding on whether to install it tonight or not - problem is I have the Injen currently installed and it means uninstalling the injen wash bottle aswell, which means removing the drivers wheel and it's 96 degrees out currently................
__________________
Best Timeslip: <Time Slip> Latest Dyno (w. Injen only): <Dyno Sheet> Journal: <Here>
GoPaul is offline   Reply With Quote
Old 06-13-2011, 05:22 PM   #1825
rolnslo
Rolling along...
 
rolnslo's Avatar
 
Drives: 2011 2SS/RS SGM
Join Date: Mar 2008
Location: Houston, TX
Posts: 4,380
Yeah, working in 95+ degree heat isn't much fun, is it Paul? Heck, just standing around in it doing nothing isn't much fun either.

On the plus side, it'll be 75 degrees at 7am tomorrow morning, if that is more conducive to getting the work done. Better work quick though, it'll be 88* by 10am.
__________________
rolnslo is offline   Reply With Quote
Old 06-13-2011, 05:24 PM   #1826
GoPaul
H-Town Camaro Club
 
GoPaul's Avatar
 
Drives: 2010 Black Camaro 2LT RS M6
Join Date: Apr 2010
Location: Katy, TX
Posts: 926
Quote:
Originally Posted by rolnslo View Post
Yeah, working in 95+ degree heat isn't much fun, is it Paul? Heck, just standing around in it doing nothing isn't much fun either.

On the plus side, it'll be 75 degrees at 7am tomorrow morning, if that is more conducive to getting the work done. Better work quick though, it'll be 88* by 10am.
you're not kidding !

I think I may start tonight and take breaks by jumping in the pool lol!

I car pool with a friend and it's his turn tomorrow so I can always finish tomorrow if need be.
__________________
Best Timeslip: <Time Slip> Latest Dyno (w. Injen only): <Dyno Sheet> Journal: <Here>
GoPaul is offline   Reply With Quote
Old 06-13-2011, 05:33 PM   #1827
chozn4service


 
chozn4service's Avatar
 
Drives: 2016 SS w/2SS A8 Blue Velvet
Join Date: Dec 2009
Location: 39.793153,-86.238223
Posts: 3,678
Quote:
Originally Posted by GoPaul View Post
nice job bud, I just got home and opened my box up - deciding on whether to install it tonight or not - problem is I have the Injen currently installed and it means uninstalling the injen wash bottle aswell, which means removing the drivers wheel and it's 96 degrees out currently................
Ok, got to start it and let it idle. Going to get the keys now. LOL


EDIT: OH SNAP! This thing is sucking some air! My exhaust sounds a lot deeper too...... Definitely has a different sound on rev's.
Attached Images
 
__________________
Never grow up, it's a trap!

Last edited by chozn4service; 06-13-2011 at 06:18 PM.
chozn4service is offline   Reply With Quote
Old 06-13-2011, 06:18 PM   #1828
GoPaul
H-Town Camaro Club
 
GoPaul's Avatar
 
Drives: 2010 Black Camaro 2LT RS M6
Join Date: Apr 2010
Location: Katy, TX
Posts: 926
Quote:
Originally Posted by chozn4service View Post
Ok, got to start it and let it idle. Going to get the keys now. LOL
I'm literally in a pool of sweat here man! Injen wash bottle now removed and stock one reinstalled. Injen CAI also removed as I had to do that to get the stock bottle in. May aswell finish the job now - after I have watched the videos above that is
__________________
Best Timeslip: <Time Slip> Latest Dyno (w. Injen only): <Dyno Sheet> Journal: <Here>
GoPaul is offline   Reply With Quote
Old 06-13-2011, 06:21 PM   #1829
larryt1026
 
larryt1026's Avatar
 
Drives: 2011 Camaro LT
Join Date: Jun 2010
Location: Jacksonville, FL
Posts: 575
looks good!! was the install tough?
larryt1026 is offline   Reply With Quote
Old 06-13-2011, 06:28 PM   #1830
GoPaul
H-Town Camaro Club
 
GoPaul's Avatar
 
Drives: 2010 Black Camaro 2LT RS M6
Join Date: Apr 2010
Location: Katy, TX
Posts: 926
Quote:
Originally Posted by chozn4service View Post
Ok, got to start it and let it idle. Going to get the keys now. LOL


EDIT: OH SNAP! This thing is sucking some air! My exhaust sounds a lot deeper too...... Definitely has a different sound on rev's.
quick question:

Did you have to modify the brackets?
__________________
Best Timeslip: <Time Slip> Latest Dyno (w. Injen only): <Dyno Sheet> Journal: <Here>
GoPaul is offline   Reply With Quote
Old 06-13-2011, 06:28 PM   #1831
Fhabercrombie
 
Fhabercrombie's Avatar
 
Drives: 2010 Chevrolet Camaro
Join Date: Mar 2011
Location: St. Peters
Posts: 13
GoPaul, were you unhappy with the Injen? Or what was the reason for the switch?
Fhabercrombie is offline   Reply With Quote
Old 06-13-2011, 06:38 PM   #1832
SolarFlare
 
SolarFlare's Avatar
 
Drives: 2010 IOM 1LT
Join Date: Mar 2011
Location: Saint Louis, MO
Posts: 121
Quote:
Originally Posted by chozn4service View Post
Ok, got to start it and let it idle. Going to get the keys now. LOL


EDIT: OH SNAP! This thing is sucking some air! My exhaust sounds a lot deeper too...... Definitely has a different sound on rev's.
Just got mine put on too! This thing is a beast! Rev sounds amazing! Install was a Bitch, but worth it! Thanks so much VR and chozn for sactuslly syarting the list! (even though I was #1 )
SolarFlare is offline   Reply With Quote
Old 06-13-2011, 06:40 PM   #1833
SolarFlare
 
SolarFlare's Avatar
 
Drives: 2010 IOM 1LT
Join Date: Mar 2011
Location: Saint Louis, MO
Posts: 121
Lightbulb

Quote:
Originally Posted by GoPaul View Post
quick question:

Did you have to modify the brackets?
Radiator brackets have to be modified, the instructions do a very poor job at explaining how to do it exactly
SolarFlare is offline   Reply With Quote
Old 06-13-2011, 06:42 PM   #1834
GoPaul
H-Town Camaro Club
 
GoPaul's Avatar
 
Drives: 2010 Black Camaro 2LT RS M6
Join Date: Apr 2010
Location: Katy, TX
Posts: 926
Quote:
Originally Posted by Fhabercrombie View Post
GoPaul, were you unhappy with the Injen? Or what was the reason for the switch?
Not at all, I loved the injen. Reason for the switch - the 10 extra horses
__________________
Best Timeslip: <Time Slip> Latest Dyno (w. Injen only): <Dyno Sheet> Journal: <Here>
GoPaul is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY: Vararam CAI Install with Color Photos Jeanius Camaro DIY & HOW-TO instructions & discussions 22 05-26-2015 02:48 PM
R2C Cold Air Intake Installed!! TXGooch21 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 15 12-01-2013 09:40 PM
Vararam installed!!! BackinBlackSS/RS Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 654 06-20-2012 07:35 AM
GMPP v6 intake FirstCamaro2k10 Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 4 05-18-2011 05:05 PM


All times are GMT -5. The time now is 01:41 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.