Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vararam
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 08-11-2009, 11:50 AM   #15
FRCBobby
 
FRCBobby's Avatar
 
Drives: 2008 Corvette
Join Date: Jul 2009
Location: Pikeville, KY
Posts: 126
OK, put the Procharger on order for a customers 2010 M6 car today. Car will be getting Procharger, Kooks 1 7/8 and a blower cam but we may possibly do a dyno before the cam swap just to give an idea.

Also, shoot me a message if anyone needs a Procharger we have very competitive pricing.

Thanks guys
FRCBobby is offline   Reply With Quote
Old 08-11-2009, 12:06 PM   #16
9t8z28
 
Drives: 98 CAMARO
Join Date: Aug 2009
Location: DOYLESTOWN, PA
Posts: 54
Quote:
Originally Posted by procharge2010 View Post
Just got my car back from procharger yesterday it was the 1st m-6 to be done.Stock on very hot day with high humidty 342 rwhp 342 tq. tune to the rich side because i am adding exhaust very soon it made 526 rwhp 460tq. NOTE pulls like a mule from idle all the way to red line!!!
How much boost and what all was done to it?
9t8z28 is offline   Reply With Quote
Old 08-11-2009, 12:10 PM   #17
karr1008
Supercharging
 
karr1008's Avatar
 
Drives: 20XX Camaro SS
Join Date: Feb 2007
Location: N. Alabama
Posts: 178
Hmm... I think I would like to have some info as well on this Procharger for my SS.
Subscribed
__________________
_____________________________________
In Camaro Standby mode
karr1008 is offline   Reply With Quote
Old 08-11-2009, 12:41 PM   #18
10aSSee D


 
10aSSee D's Avatar
 
Drives: Silver 2010 SS Camaro
Join Date: Jul 2009
Location: TN
Posts: 2,562
I to would like to know the boost. But would like to look into these as i am thinking about a maggie.
__________________
MODS:

ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq
10aSSee D is offline   Reply With Quote
Old 08-12-2009, 05:10 PM   #19
R8cerX
 
R8cerX's Avatar
 
Drives: 2010 CamaroSS
Join Date: Aug 2009
Location: Burlington NC
Posts: 217
We just finished our first 2010 Camaro SS L99, installed ARH LT headers w/ stock mufflers, Procharger P-1sc-1 with 8lbs and custom tuning with HP Tuners...the car baselined at 314rwhp and 331rwtq, after 472.6rwhp and 470rwtq. The drivetrain loss seems kind of high on these cars in comparison to the SRT automatics, most of those cars make about 370rwhp stock which is only about 15/16% loss compared to the 20/21% we saw on this car.

Heres a link to the dyno video, please ignore my verbal screwup on the baseline torque:





We said 9lbs on the vid, but after checking the text page on the dyno the car made 8lbs at the 6000rpm
R8cerX is offline   Reply With Quote
Old 08-12-2009, 05:14 PM   #20
pharmd
Master of Medicine
 
pharmd's Avatar
 
Drives: 4th Gen
Join Date: Oct 2008
Location: Kentucky
Posts: 784
Quote:
Originally Posted by FRCBobby View Post
We have a customer that is suppose to be bringing us the cash for a Procharger install this week. When we get it here and installed we will post up install pics as well as dyno results.
Who is it Bobby, anyone on KYhorsepower?
__________________
2002 Camaro SS. 408 LS2. 500+RWHP/480RWTQ. Full UMI RR suspension. Koni/Strano. 295F/315R. 3500#(55/45)
pharmd is offline   Reply With Quote
Old 08-12-2009, 06:07 PM   #21
Bbrock25
 
Bbrock25's Avatar
 
Drives: 2010 1SS/RS Inferno Orange
Join Date: Jun 2009
Location: East Ky
Posts: 704
Quote:
Originally Posted by FRCBobby View Post
OK, put the Procharger on order for a customers 2010 M6 car today. Car will be getting Procharger, Kooks 1 7/8 and a blower cam but we may possibly do a dyno before the cam swap just to give an idea.

Also, shoot me a message if anyone needs a Procharger we have very competitive pricing.

Thanks guys
whoa whoa whoa hold up a sec lol. I'm 25 mins away from you guys. whenever you are gonna do a dyno of the procharger PLEASE let me know, id love to come watch lmao. I only know of 1 dyno in pikeville, and he doesn't tune just dyno, (or so my friend tells me). let me know where your located, and where the dyno/tune shop is.
Thanks!
Bbrock25 is offline   Reply With Quote
Old 08-12-2009, 07:47 PM   #22
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crazy Coast
Posts: 15,143
Great numbers. I was thinking they'd be higher but they're still great. 150-pus.
__________________

'20 ZL1 Black "Fury"
A10, PDR, Exposed CF Extractor
Magnuson Magnum DI TVS2650R // TooHighPSI Port Injection // FF // Katech Low Side // Soler 103 // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs
radz28 is offline   Reply With Quote
Old 08-13-2009, 06:37 AM   #23
9t8z28
 
Drives: 98 CAMARO
Join Date: Aug 2009
Location: DOYLESTOWN, PA
Posts: 54
What percentage of power is lost through the drivetrain on these cars?
9t8z28 is offline   Reply With Quote
Old 08-13-2009, 08:03 AM   #24
R8cerX
 
R8cerX's Avatar
 
Drives: 2010 CamaroSS
Join Date: Aug 2009
Location: Burlington NC
Posts: 217
Quote:
Originally Posted by 9t8z28 View Post
What percentage of power is lost through the drivetrain on these cars?
On the L99 Automatic we installed the PC on, the drivetrain loss seems kind of high in comparison to the SRT automatics, most of those cars make about 370rwhp stock which is only about 15/16% loss compared to the 20/21% we saw on this camaro.
R8cerX is offline   Reply With Quote
Old 08-13-2009, 08:58 AM   #25
9t8z28
 
Drives: 98 CAMARO
Join Date: Aug 2009
Location: DOYLESTOWN, PA
Posts: 54
Quote:
Originally Posted by Dtpracing View Post
On the L99 Automatic we installed the PC on, the drivetrain loss seems kind of high in comparison to the SRT automatics, most of those cars make about 370rwhp stock which is only about 15/16% loss compared to the 20/21% we saw on this camaro.
Wow!
9t8z28 is offline   Reply With Quote
Old 08-13-2009, 01:13 PM   #26
9t8z28
 
Drives: 98 CAMARO
Join Date: Aug 2009
Location: DOYLESTOWN, PA
Posts: 54
Quote:
Originally Posted by Dtpracing View Post
We just finished our first 2010 Camaro SS L99, installed ARH LT headers w/ stock mufflers, Procharger P-1sc-1 with 8lbs and custom tuning with HP Tuners...the car baselined at 314rwhp and 331rwtq, after 472.6rwhp and 470rwtq. The drivetrain loss seems kind of high on these cars in comparison to the SRT automatics, most of those cars make about 370rwhp stock which is only about 15/16% loss compared to the 20/21% we saw on this car.

Heres a link to the dyno video, please ignore my verbal screwup on the baseline torque:


We said 9lbs on the vid, but after checking the text page on the dyno the car made 8lbs at the 6000rpm
Did you add or change out the fuel pump and install injectors?
9t8z28 is offline   Reply With Quote
Old 08-13-2009, 02:25 PM   #27
franknbeans
Whipped
 
franknbeans's Avatar
 
Drives: 2010 CAMARO
Join Date: Sep 2008
Location: Pittsburgh-ish - PA
Posts: 4,216
__________________
franknbeans is offline   Reply With Quote
Old 08-13-2009, 05:37 PM   #28
9t8z28
 
Drives: 98 CAMARO
Join Date: Aug 2009
Location: DOYLESTOWN, PA
Posts: 54
Quote:
Originally Posted by giod View Post
So by my math that's about 33% gain in HP WITH headers that can account for about 15HP Thats a far cry from the 50% increase as previously posted and claimed by procharger.. Hmmmm. I am begining to have my suspicions, about the 45-50% increase, we have yet to see a dyno, and I don't understand why, surely prior to marketing it has installed and dyno'd this on a ls3 camaro... am I missing something (other than an actual Dyno)
I don't think that Procharger claimed what kit gained those numbers. Typically the tuner kits bring the big numbers.
9t8z28 is offline   Reply With Quote
 
Reply

Tags
procharger

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
V6 Camaro Dyno numbers are in!! MadMaxx Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 145 10-07-2009 06:38 PM
Another set of dyno numbers plus.. scrming Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 25 07-10-2009 04:47 AM
Dyno numbers for axle-backs? LDGn63 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 12 07-08-2009 06:20 PM
C6 LS3 Stock Dyno Numbers TomServo Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 23 01-22-2009 09:51 AM


All times are GMT -5. The time now is 01:59 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.