05-31-2014, 10:51 AM | #1 |
Drives: 2011 Camaro 2SS/RS 6 Manual Join Date: May 2011
Location: Ottawa, Ont
Posts: 238
|
Need Some LS3 Parts!!
Looking for a stock intake manifold:
Fuel injectors: Fuel Rail: coil packs: engine cover: Wire set: If you have these just sitting around the garage collecting dust you want to sell! I have a home for these. My buddy picked up and LS3 out of a 2010 Camaro SS that was fire damaged. This is for a 55 Chev project. Cheers Glen L
__________________
[Dyno Results] 684rwhp 602.84Pktq at 6600rpm. Mods: too much to list.
|
05-31-2014, 10:57 AM | #2 |
Flying da helicopter
|
If you can wait til July, I will have these available
|
05-31-2014, 12:38 PM | #3 |
Drives: 2011 Camaro 2SS/RS 6 Manual Join Date: May 2011
Location: Ottawa, Ont
Posts: 238
|
What would be your asking price?
__________________
[Dyno Results] 684rwhp 602.84Pktq at 6600rpm. Mods: too much to list.
Last edited by SYNGSS; 05-31-2014 at 01:22 PM. |
05-31-2014, 12:43 PM | #4 |
Flying da helicopter
|
Nothing expensive, just trying to get rid of them.
|
05-31-2014, 12:50 PM | #5 |
Drives: 2011 Camaro 2SS/RS 6 Manual Join Date: May 2011
Location: Ottawa, Ont
Posts: 238
|
Great I will get back to soon. I'm sure July will be fine.
__________________
[Dyno Results] 684rwhp 602.84Pktq at 6600rpm. Mods: too much to list.
|
05-31-2014, 06:44 PM | #6 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
I'm in bc have everything he needs and then some. Will have la3 with all the goodies with e force mounted on it. Pretty much everything in my sig at bottom Also have original diff with 5000 kms on it
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
05-31-2014, 06:46 PM | #7 |
bcguy
Drives: 2011 ss/rs m6 Join Date: Nov 2011
Location: british columbia canada
Posts: 507
|
Motor shop is going to take heads off and check out once new motor is in and current motor is out Made 636 to rear wheels and runs great
__________________
Agp 62/66 ,lsx 427. , Callie's ,diamond ,all pro ,American racing ,I'ds130s,102 intake and throttle body,etc .fore triple , Turbo 400 level 5 , b and m pro , dss carbon fiber , dss ford 9 inch with strange pumpkin,3.73 ratio,1400 hp axels,boost and air fuel pillar guages. Weld rts 17x10 and 17x4.5 with m and h drag radials and skinnys
|
08-28-2014, 06:03 AM | #8 | |
Drives: 2014 2SS 1LE Supercharged 600hp Join Date: Apr 2013
Location: Camrose Alberta
Posts: 129
|
Quote:
|
|
|
|